HCC/HCF4026B HCC/HCF4033B DECADE COUNTERS/DIVIDERS WITH DECODED 7-SEGMENT DISPLAY OUTPUTS WITH; DISPLAY ENABLE 4026B RIPPLE BLANKING 4033B . . . .. .. . .. .. COUNTER AND 7-SEGMENT DECODING IN ONE PACKAGE EASILY INTERFACED WITH 7-SEGMENT DISPLAY TYPES FULLY STATIC COUNTER OPERATION : DC TO 6MHz (typ.) AT VDD = 10V IDEAL FOR LOW-POWER DISPLAYS DISPLAY ENABLE OUTPUT - 4026B "RIPPLE BLANKING" AND LAMP TEST - 4033B QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS 5V, 10V, AND 15V PARAMETRIC RATING INPUT CURRENT OF 100nA AT 18V AND 25C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC TENTATIVE STANDARD N 13A, "STANDARD SPECIFICATIONS FOR DESCRIPTION OF "B" SERIES CMOS DEVICES" DESCRIPTION The HCC4026B/4033B (extended temperature range) and HCF4026B/4033B (intermediate temperature range) are monolithic integrated circuits, available in 16-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4026B and HCC/HCF4033B each consist of a 5-stage Johnson decade counter and an output decoder which converts the Johnson code to a 7-segment decoded output for driving one stage in a numerical display. These devices are particularly advantageous in display applications where low power dissipation and/or low package count are important. Inputs common to both types are CLOCK, RESET, & CLOCK INHIBIT ; common outputs are CARRY OUT and the seven decoded outputs (a, b, c, d, e, f, g). Additional inputs and outputs for the HCC/HCF4026B include DISPLAY ENABLE input and DISPLAY ENABLE and UNGATED "CSEGMENT" outputs. Signals peculiar to the HCC/HCF4033B are RIPPLE-BLANKING INPUT AND LAMP TEST INPUT and a RIPPLE-BLANKING OUTPUT. A high RESET signal clears the deJune 1989 EY (Plastic Package) M1 (Micro Package) F (Ceramic Frit Seal Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC40XXBF HCF40XXBM1 HCF40XXBEY HCF40XXBC1 PIN CONNECTIONS 4026B 4033B 1/15 HCC/HCF4026B/4033B cade counter to its zero count. The counter is advanced one count at the positive clock signal transition if the CLOCK INHIBIT signal is low. Counter advancement via the clock line is inhibited when the CLOCK INHIBIT signal is high. Antilock gating is provided on the JOHNSON counter, thus assuring proper counting sequence. The CARRY-OUT (Cout) signal completes one cycle every ten CLOCK INPUT cycles and is used to clock the succeeding decade directly in a multi-decade counting chain. The seven decoded outputs (a, b, c, d, e, f, g) illuminate the proper segments in a seven segment display device used for representing the decimal numbers 0 to 9. The 7-segment outputs go high on selection in the HCC/HCF4033B ; in the HCC/HCF4026B these outputs go high only when the DISPLAY ENABLE IN is high. HCC/HCF4026B - When the DISPLAY ENABLE IN is low the seven decoded outputs are forced low regardless of the state of the counter. Activation of the display only when required results in significant power savings. This system also facilitates implementation of display-character multiplexing. The CARRY OUT and UNGATED "C-SEGMENT" signals are not gated by the DISPLAY ENABLE and therefore are available continuously. This feature is a requirement in implementation of certain divider functions such as divide-by-60 and divide-by-12. HCC/HCF4033B - The HCC/HCF4033B has provisions for automatic blanking of the non-significant zeros in a multi-digit decimal number which results in an easily readable display consistent with 2/15 normal writing practice. For example, the number 0050.07000 in an eight digit display would be displayed as 50.07. Zero suppression on the integer side is obtained by connecting the RBI terminal of the HCC/HCF4033B associated with the most significant digit in the display to a low-level voltage and connecting the RBO terminal of that stage to the RBI terminal of the HCC/HCF4033B in the next-lower significant position in the display. This procedure is continued for each succeeding HCC/HCF4033B on the integer side of the display. On the fraction side of the display the RBI of the HCC/HCF4033B associated with the least significant bit is connected to a low-level voltage and the RBO of that HCC/HCF4033B is connected to the RBI terminal of the HCC/HCF4033B in the next more-significant-bit position. Again, this procedure is continued for all HCC/HCF4033B's on the fraction side of the display. In a purely fractional number the zero immediately preceding the decimal point can be displayed by connecting the RBI of that stage to a high level voltage (instead of to the RBO of the next more-significant-stage). For example : optional zero 0.7346. Likewise, the zero in a number such as 763.0 can be displayed by connecting the RBI of the HCC/HCF4033B associated with it to a high-level voltage. Ripple blanking of non-significant zeros provides an appreciable savings in display power. The HCC/HCF4033B has a LAMP TEST input which, when connected to a high-level voltage, overrides normal decoder operation and enables a check to be made on possible display malfunctions by putting the seven outputs in the high state. HCC/HCF4026B/4033B FUNCTIONAL DIAGRAMS 4033B 4026B ABSOLUTE MAXIMUM RATINGS Symbol V DD * Parameter Supply Voltage : HCC Types HCF Types Vi Input Voltage II Value Unit - 0.5 to + 20 - 0.5 to + 18 V V - 0.5 to V DD + 0.5 V DC Input Current (any one input) 10 mA P tot Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package-temperature Range 200 mW 100 mW T op Operating Temperature : HCC Types HCF Types - 55 to + 125 - 40 to + 85 C C T s tg Storasge Temperature - 65 to + 150 C Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltages values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top Parameter Supply Voltage : HCC Types HC F Types Input Voltage Operating Temperature : HCC Types H CF Types Value Unit 3 to 18 3 to 15 V V 0 to V DD V - 55 to + 125 - 40 to + 85 C C 3/15 HCC/HCF4026B/4033B LOGIC DIAGRAMS 4026B 4033B 4/15 HCC/HCF4026B/4033B TIMING DIAGRAMS 4026B 4033B 5/15 HCC/HCF4026B/4033B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Symbol IL VOH VOL VIH VIL IOH Parameter Quiescent Current CI Min. Max. Min. Unit T High* Typ. Max. Min. Max. 5 150 HCC 0/10 Types 0/15 10 10 0.04 10 300 15 20 0.04 20 600 0/20 20 100 0.08 100 3000 0/ 5 5 20 0.04 20 150 HCF 0/10 Types 0/15 10 40 0.04 40 300 0.04 80 0/10 < 1 10 9.95 9.95 9.95 0/15 < 1 15 14.95 14.95 14.95 4.95 4.95 V 5/0 < 1 5 0.05 0.05 0.05 10/0 < 1 10 0.05 0.05 0.05 15/0 < 1 15 0.05 0.05 0.05 0.5/4.5 < 1 5 3.5 3.5 3.5 1/9 < 1 10 7 7 7 1.5/13.5 < 1 15 11 4.5/0.5 < 1 5 1.5 1.5 1.5 9/1 < 1 10 3 3 3 13.5/1.5 < 1 15 2.5 11 4 5 - 2 4 V - 1.15 4.6 5 - 0.64 - 0. 51 - 1 - 0.36 9.5 10 - 1.6 - 1.3 - 2.6 - 0. 9 0/15 13.5 15 - 4.2 - 3.4 - 6.8 - 2. 4 0/ 5 2.5 5 - 1.53 - 1. 36 - 3.2 - 1. 1 0/ 5 4.6 5 - 0.52 - 0. 44 - 0.36 - 1 0/10 9.5 10 - 1.3 - 1.1 - 2.6 - 0. 9 0/15 13.5 15 - 3.6 - 3.0 - 6.8 - 2. 4 0/ 5 0.4 5 0.64 0.51 1 0.36 0/10 0.5 10 1.6 1.3 2.6 0.9 0/15 1.5 15 4.2 3.4 6.8 2.4 0/ 5 0.4 5 0.52 0.44 1 0.36 0/10 0.5 10 1.3 1.1 2.6 0.9 0/15 1.5 15 3.6 3.0 6.8 2.4 mA mA 18 0.1 10-5 0.1 1 15 0.3 10 0.3 1 Any Input Any Input 5 -5 7.5 V 4 - 1.6 - 3.2 0/ 5 HCF 0/15 Types V 11 0/10 HCC Types 0/18 Input Capacitance 4.95 A 600 5 0/ 5 HCC Types 80 < 1 Input Low Voltage HCC Types 15 0/ 5 Input High Voltage Input Leakage Current 25 C T Lo w* 0.04 HCF Types IIH, IIL V DD (V) 5 Output Low Voltage Output Sink Current | IO | (A) 5 Output High Voltage Output Drive Current VO (V) 0/ 5 HCF Types IOL VI (V) Value A pF (*) TLow = - 55C for HCC device : - 40C for HCF device. THigh= + 125C for HCC device : + 85C for HCF device. The Noise Margin for both "1" and "0" level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5V min. with VDD = 15V. 6/15 HCC/HCF4026B/4033B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25C, C L = 50pF, R L = 200k, typical temperature coefficient for all V DD values is 0.3%/C, all input rise and fall times = 20ns) Symbol Parameter Test Conditions Value V D D (V) Min. Typ. Max. Unit CLOCKED OPERATION t P L H , t P HL Propagation Delay Time Carry Out Line t P L H , t P HL Propagation Delay Time Decode Out Lines t THL , t T L H Transition Time Carry Out Line f CL * t WC t r, tf Maximum Clock Input Frequency Clock Pulse Width Clock Input Rise or Fall Time 5 250 500 10 100 200 15 75 150 5 350 700 10 125 250 15 90 180 5 100 200 10 50 100 15 25 50 5 2.5 5 10 5.5 11 15 8 16 ns ns ns MHz 5 110 270 10 50 100 15 40 80 5 10 15 Unlimited ns s RESET OPERATION t PL H, Propagation Delay Time Carry Out Line t P L H , t P HL Propagation Delay Time Decode Out Lines t WR trem Reset Pulse Width Reset Removal Time 5 275 550 10 120 240 15 80 160 5 300 600 10 125 250 15 90 180 5 100 120 10 50 100 15 25 50 5 0 30 10 0 15 15 0 10 ns ns ns ns * Measured with respect to carry output line. 7/15 HCC/HCF4026B/4033B Typical Output Low (sink) Current. Minimum Output Low (sink) Current Characteristics. Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characteristics. TYPICAL APPLICATIONS Interfacing with Filament Fluorescent Display. 8/15 Detail of Typical Flip-flop Stage for Both Types. HCC/HCF4026B/4033B TYPICAL APPLICATIONS (continued) Interfacing with LED Displays (display common anode). (Display Common Cathode). Interfacing with NIXIE Tube. 9/15 HCC/HCF4026B/4033B Interfacing with Liquid Cristal Displays. TEST CIRCUITS Quiescent Device Current. Input Current. 10/15 Input Voltage. HCC/HCF4026B/4033B Plastic DIP16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 11/15 HCC/HCF4026B/4033B Ceramic DIP16/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7 0.276 D E 3.3 0.130 0.38 e3 0.015 17.78 0.700 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053D 12/15 HCC/HCF4026B/4033B SO16 (Narrow) MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.004 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 (typ.) D 9.8 E 5.8 10 0.385 6.2 0.228 0.393 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8 (max.) P013H 13/15 HCC/HCF4026B/4033B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 14/15 HCC/HCF4026B/4033B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 15/15