61
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors
True Hot-Plug, Blind-Mating Mixed Signal and Power Connectors
Product Facts
■High performance
CROWN BAND contacts
■Low millivolt drop, minimal
temperature rise
■Float mount for improved
gatherability (blind mating)
■True hot-pluggability for
current interruption under
load
■Sequenced mating for power
and signal
■Crimp, PCB tail, compliant
press-fit and threaded
terminations
■Meets safety regulatory
requirements
Typical Applications
■Low noise power supplies
■Switch-mode power
supplies (SMPS)
■Power factor-correcting
(PFC) power supplies
■Systems requiring mounting
to backplane or chassis
■Redundant (N + 1) power
systems
■“Live” hot-plug power
supplies
■All ELCON Drawer
connectors in this section
are RoHS compliant
Technical Documents
Product Specification
108-2285
The Drawer Series family
of mixed power and signal
connectors is designed
for an unlimited array of
applications that use
drawer-type, true hot-plug
power supply units. Contacts
for AC IN and DC OUT
power, logic and signal are
all housed in robust one
piece insulators that have
built-in or optional mating
guides for improved
gatherability and mating
polarization. Key features
include Tyco Electronics
high performance
CROWN BAND contact,
true hot-pluggability,
sequenced mating, probe-
proof contacts, and support
for various termination styles.
Product Highlights
High Performance
CROWN BAND Contact
Tyco Electronics ELCON
CROWN BAND contact
consists of a fingered barrel
with the flexibility and con-
ductivity to deliver excellent
electrical and mechanical
performance. This results
in consistent insertion and
extraction forces, and maxi-
mum surface contact area
for low voltage drop and
minimal heat generation.
Support for True
hot-pluggability
True hot-pluggability is
supported through the use
of gold-plated size #12
contacts specially designed
to achieve current interrup-
tion under load as defined
by safety regulatory
agencies. This contact has
been evaluated and found
to comply with UL and CSA
safety regulatory standards.
Standard Contacts
Tyco Electronics ELCON
Drawer Series connectors
use standard contacts in
all its housings, resulting in
lower cost and fewer part
numbers. Contacts are
available in crimp, PCB tail,
threaded and press-fit
termination styles, meeting
a wide range of connector
mounting requirements.
Many Standard Designs
Numerous Drawer connec-
tors have been tooled over
the years and are available
to all our customers for use
in their applications. All
these connectors can be
configured with different
contact layouts, terminations
and mating sequencing
schemes to meet applica-
tion-specific requirements.
62
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors
True Hot-Plug, Blind-Mating Mixed Signal and Power Connectors (Continued)
Probe-proof Double
CROWN BAND Contacts
The size #0 contacts used
in the Top Drawer, Double
Drawer, DualPower and
QuadPower connectors
are also available in a
probe-proof Double
CROWN BAND version.
These contacts are spe-
cially suited for operator-
serviced power supplies
that require extra safety
protection.
Signal/Power Sequencing
All signal and some power
contacts are available in
various lengths to allow
multiple levels of sequenc-
ing, thus giving the engi-
neer further design
flexibility.
Mating Polarization
To ensure positive housing
mating of connectors,
polarization is provided
in the form of molded-in
guide posts or pre-installed
guide pins.
Regulatory Agency
Certifications
Tyco Electronics ELCON
Drawer Series connectors
have been evaluated and
found to comply with the
UL1977 standard and the
CSA standard C22.2 No.
182.3-M1987.
Tyco Electronics can also
work with the customer to
obtain application-specific
regulatory certifications if
needed.
Wide Array of
Standard Contacts
ELCON Drawer connectors
support various termination
styles, including crimp for
cable, solder tail and com-
pliant press-fit for mounting
to PCB, and internal/
external threads for termina-
tion to lugs and/or busbars.
See table below for details.
Termination
Contact Size PC Tail Press-fit Crimp Threaded
Internal External
#20 •••
#16 •••
#12 •••
#8 •••••
#4 •••
#0 •••
Application-Specific Designs
If none of our standard
Drawer connectors
satisfies your requirements,
Tyco Electronics can
develop an ELCON con-
nector design specific to
your application. We will
work closely with your engi-
neers to fully understand
the design requirements
and develop an intercon-
nect solution the meets
your exact needs. After the
concept and design stages,
Tyco Electronics produces
prototypes that perform
both electrically and
mechanically the same as
production parts. These
machined parts are used
for testing, regulatory
agency evaluations and
even as pre-production
components, allowing the
shortest lead time from
concept to manufacturing
in the industry.
Concept
Tyco Electronics engineers
work closely with the cus-
tomer to fully understand
the design requirements.
Design
A sketch drawing of the
design concept is created
for customer review, and the
design is finalized only when
it fully meets the require-
ments of the customer.
Prototypes
The design frozen and work
on the mold tools starts.
Meanwhile, Tyco Electronics
builds prototypes that are
identical to the production
parts.
Production
By the time the customer
is ready for production, all
requirements for release
to production, such as
qualification and regulatory
agency approval, have
been cleared.
3mm Diameter Test Probe in
Accordance with IEC 435
Protective Cap (insulator)
R
R
63
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Power Connectors & Interconnection Systems
How to Tailor Your ELCON Drawer Connector
If you selected a standard Drawer connector for your appli-
cation, before placing an order you need to specify your
application-specific requirements, such as housing type,
contact loading, and termination style. Layout forms for all
standard Drawer connectors, such as the one shown below,
are available online at http://www.tycoelectronics.com or
can be obtained from Tyco Electronics customer service for
this purpose. Complete a form for the pin and socket side
of your connector as indicated in the instructions and fax it
to Tyco Electronics customer service. We will issue a unique
part number specific to your configuration, which you can
then use to place orders. Samples and Customer Drawings
are also available upon request.
Pin Assembly
1. Choose one housing from the Pin Housing Selection Menu table. Place
an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded and PCB tail
contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the
drawing: e.g., if you need a size #20 premate PCB tail standard con-
tact to be installed in contact position #10, write “Q” in circle #10.
4. Sign, date and send the completed form to your local
Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
Submit to your local Tyco Electronics Sales Engineer.
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A=1766811-1 Crimp
B=1766819-1 Probe Proof, crimp
C=1766230-1 1/4-20 Internal Thread
D=1766274-1 M6 x 1 Internal Thread
#0 E=1766269-1 Probe Proof, 1/4-20 Internal Thread
F=1766275-1 Probe Proof, M6 x 1 Internal Thread
G=1766268-1 1/4-20 External Thread
H=1766231-1 M6 x 1 External Thread
J=1766270-1 Probe Proof, 1/4-20 External Thread
K=1766276-1 Probe Proof, M6 x 1 External Thread
L=1650155-1 Crimp, standard
M=1650161-1 Crimp, premate
#20 N=1650162-2 Crimp, postmate
P=1650283-1 PCB tail, standard
Q=1650065-1 PCB tail, premate
R=1650226-1 PCB tail, postmate
S=1766196-1 Crimp, standard
T=1766198-1 Crimp, premate
#16 U=1766199-2 Crimp, postmate
V=1766222-1 PCB tail, standard
W=1766223-1 PCB tail, premate
X=1766818-1 PCB tail, postmate
Y=1766193-1 Crimp, standard
Z=1766195-1 Crimp, premate
#12 AA = 1766196-1 Crimp, postmate
AB = 1766245-1 PCB tail, standard
AC = 1766250-1 PCB tail, premate
AD = 1766249-1 PCB tail, postmate
AE = 1650153-2 Crimp, standard, Hot-Plug
#12 Hot- AF = 1650156-2 Crimp, premate, Hot-Plug
Plug AG = 1650060-2 PCB tail, standard, Hot-Plug
AH = 1650074-3 PCB tail, premate, Hot-Plug
12
3456789
12
11
10
15
1413 18
1716
21
2019 24
23
22
27
26
25
30
29
28 33
32
31 34
35 36 37 38 39 40
41 42 43 44 45 46
47 48 49
50 51 52
Size #16
Size #20
Size #0
Size #12 or
#12HP
G1 G2
G4
G3
Crimp and Threaded contacts are removable. PCB tail contacts are non-removable.
Pin Housing Selection Menu
Check
Part Number Description One
1648183-1 Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
64
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Power Connectors & Interconnection Systems
ELCON Drawer Connector Mounting
Screw Into Thread of Guide Pin (When Applicable)
You can optionally fix-mount housings that have a guide
pin by attaching a commercially available screw and
washer into the thread on the back of the guide pin, as
shown in the figures below.
Screw Through Mounting Flange of Housing
Fix to the panel by attaching a commercially available
screw and a washer through the top and bottom mounting
flange of the housing.
Panel Fixed Mounting
As a rule of thumb, ELCON Drawer connectors can be fix-mounted to a panel, in two ways: (1) by attaching a screw
through the top and bottom mounting flange of the housing; or (2) by attaching a screw into a threaded guide pin (for
those connectors that have one). An example of each case is shown in the sketches below.
Panel Float Mounting
When float-mounting to a panel or chassis, use the stainless steel shoulder screws specified in the layout sheet or
customer drawing specific to your ELCON Drawer connector. Shown in the sketch below is an example of how the
Top Drawer connector is float-mounted to a panel.
All ELCON Drawer Series connectors can be fixed mounted or float mounted using the designated shoulder screws to
allow improved gatherability for blind mating of the connector. Panel cut out dimensions are shown on the customer
drawing specific to your ELCON Drawer connector.
Float Mount of Top Drawer (Example)
Panel (Ref)
Mounting
Flange
Shoulder
Screw Guide Pin
Commercially
available screw
and washer
Commercially
available screw
and washer
#6-32 or
M3 x 0.5 screw .25
[6.35]
Guide pin
Internally threaded
(6-32) guide pin
Screw Description Part Number Used On
#10-32 UNF 2A Thread 1650399-1 Top and Double Drawer, Dual and QuadPower,
M5 x 0.8 Metric Thread 1650401-1 In-Line QuadPower, W5 Drawer
#8-32 UNF 2A Thread 1650402-1
#6-32 UNF 2A Thread 1650106-1 All Other Drawers
M4 x 0.7 Metric Thread 1650589-1
Note: All part numbers are RoHS compliant.
65
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Power Connectors & Interconnection Systems
ELCON Drawer Connector Mounting (Continued)
Strain Relief and Wire Dress
If required, wires can be bundled together and supported
with cable ties. Wires must not be stretched or confined in
any way that would restrict the floating action of the con-
nectors. Therefore, the wires must remain perpendicular to
the connector and avoid an excessively sharp bend
radius. The minimum recommended distance for the cable
tie, and the minimum bend radius of a wire bundle are
shown in the figure to the right.
Connector Engagement
To ensure proper mating of the connector when the power supply unit is fully engaged into the system, the gap between
the pin and socket (shown as dimension “A” in the sketch below) must be within the limit specified in the customer
drawing for your ELCON Drawer connector. Failure to meet this requirement may compromise contact wipe. Refer to
the customer drawing for details. ELCON Drawer connectors are polarized and will only mate in the correct orientation
(see sketch below).
PCB Fixed Mounting
When mounting to a PC board, the connector standoffs must be seated on the board. Hold-downs are recommended to
ensure stability during the soldering procedure. PCB mount hole patterns are shown on the customer drawing specific to
your ELCON Drawer connector.
Flush PCB Mount Drawer Connectors Drawer Connectors with Cabled AC IN
.020 [0.51]
.020 [0.51]
PC Board (Ref)
Connector
Standoffs
Wire
Notch in
Guide Post
Rib in Guide
Post Cavity
66
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Connector Tooling
Insertion/Removal Tools: Industry standard plastic insertion/removal tooling is compatible
with all crimp contacts for pin and socket removal. The following tools are available from
Tyco Electronics.
Wire strip length: If inserting stranded wire into crimp style contacts, please use the table
below to determine the proper strip length of the wire.
Crimp Tools: The following table lists applicable MIL-STD crimp tools for contacts
Crimp Termination Wire Sizes: The following table shows crimp rear release contacts and
their respective wire sizes when crimped with applicable industry standard terminal tools.
Insertion/removal tools available from ELCON
Part Numbers Size Color Code
1643917-1 Size #20 removal tool Red/White
1643916-1 Size #16 I/R tool Blue/White
1643915-1 Size #12 I/R tool Yellow/White
1643914-1 Size #8 I/R tool Red
1643922-1 Size #4 I/R tool Blue
1643921-1 Size #0 removal tool Light Yellow
Note: PCB tail contacts are non-removable.
Contact Size Wire Size AWG “L” + .020 [0.51]
inches mm
#20 #24 - #20 0.210 5.33
#16 #20 - #16 0.270 6.86
#12 #14 - #12 0.270 6.86
#8 #10* - #8 0.500 12.70
#4 #6* - #4 0.500 12.70
#0 #2* - #0 0.600 15.24
*Ref: MS3348 “Contact Bushing, Electric, Wire Barrel”
Contact Size Wire Range
AWG mm2
#20 20 - 24 0.241 - 0.616
#16 16 - 18 0.963 - 1.23
#12 12 - 14 1.94 - 2.98
#8 10 - 8 4.74 - 8.61
#4 4 (1) 21.60
#0 1/0 53.00
Note: (1) Consult Tyco Electronics for smaller wire sizes in #4 contacts
Size Type MIL-STD
12 - 24 Crimp Tool M22520/1-01
Turret head/locator M22520/1-02
Crimp Tool M22520/23-01
8 - 10 Indenter head M22520/23-02
Locator M22520/23-09
Crimp Tool M22520/23-01
4 Indenter head M22520/23-04
Locator M22520/23-11
Crimp Tool M22520/23-01
0 Indenter head M22520/23-05
Locator M22520/23-13
67
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Power Connectors & Interconnection Systems
ELCON Drawer Product Specifications
Regulatory Agency Evaluations
Materials
Housing Polyester, 30% glass-filled, UL 94V-0 black
Crimp Contacts Copper alloy, C14500
PCB Tails Brass, CDA 36000
Socket Contact Hoods (when applicable) 305 corrosion resistant steel
Size #12 hoods, Hot-Plug Beryllium copper, CDA 17300 HT
Crown contacts Beryllium copper, CDA 17200 HT
Plating
Size #20 and #12HP Gold plated over nickel
Sizes #0, #4, #8, #16 and non-HP #12 Silver plated over nickel
Hot-Plug hoods and pin contacts Gold plated over nickel
Socket Contact Hoods (when applicable) Passivated
Mechanical
Size #20 0.2 lb. 0.09 kg
Size #16 2.3 lb. 1.04 kg
Typical Size #12 2.9 lb. 1.32 kg
Insertion Forces Size #12 Hot-Plug 2.9 lb. 1.32 kg
of individual Size #8 4.4 lb. 2.00 kg
contacts Size #4 3.8 lb. 1.72 kg
Size #0 4.7 lb. 2.13 kg
Size #0 w/double Crown 4.8 lb. 2.18 kg
Size #20 0.1 lb. 0.05 kg
Size #16 0.7 lb. 0.32 kg
Typical Size #12 1.9 lb. 0.86 kg
Extraction Forces Size #12 Hot-Plug 1.9 lb. 0.86 kg
of individual Size #8 2.4 lb. 1.07 kg
contacts Size #4 3.0 lb. 1.36 kg
Size #0 3.0 lb. 1.36 kg
Size #0 w/double Crown 3.5 lb. 1.59 kg
Electrical
Size #20 1.7 mV at 5A
Size #16 3 mV at 15A
Typical Size #12 4.2 mV at 35A
Voltage drop Size #12 Hot-Plug 4.7 mV at 35A
of individual Size #8 6.5 mV at 75 A
contacts Size #4 8.4 mV at 125A
Size #0 6.3 mV at 200A
Size #0 w/double Crown 5.6 mV at 200A
Insulator dielectric strength 1,500 VDC for 1 minute, per MIL-STD 1344, Method 3001
Contacts CSA-22.2 No. 0-M91 182.30 UL 498 and UL 1977 (USR)
M1987 (CNR)
AWG #20 4A / 250V 5A / 250V
AWG #16 10A / 250V 15A / 250V
AWG #12 Top Drawer 25A / 600V 35A / 600V
AWG #12 Others 25A / 250V 35A / 250V
AWG #12 with sockets 25A / 250V 35A / 250V
Size #12 hot-plug 25A / 250V 25A / 250VAC
35A / 120V
Size #8 55A / 250V 75A / 250V
Size #0 with single or double Crown 150A / 250V 200A / 250V
Size #0 using bus bar — 200A / 250V
Size #4 100A / 250V 125A / 250V
68
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors
Base Housing Part Numbers
Pin Housing Socket Housing
1648110-1 Size 12 + Size 20 + Size 12 1648115-1 Size 12 + Size 20 + Size 12
1648111-1 Size 16 + Size 20 + Size 16 1648116-1 Size 16 + Size 20 + Size 16
1648112-1 Size 12 + Size 20 + Size 16 1648117-1 Size 12 + Size 20 + Size 16
Mini Drawer
Lower Drawer
Base Housing Part Numbers
Pin Housing Socket Housing
1648203-1 Size 12 + Size 20 + Size 12 1648206-1 Size 12 + Size 20 + Size 12
1648204-1 Size 16 + Size 20 + Size 16 1648207-1 Size 16 + Size 20 + Size 16
1648205-1 Size 12 + Size 20 + Size 16 1648208-1 Size 12 + Size 20 + Size 16
Dimensions —
2.99" x 0.79" (75.9 x 20.1 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts —
Size 12 / 16 x 6 contacts
Size 20 x 16 contacts
Current Rating — Up to 35 Amps
per size 12 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 12: Crimp and PCB tail
Size 16: Crimp and PCB tail
Size 20: Crimp and PCB tail
Dimensions —
3.26" x 1.34" (82.8 x 34.0 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts —
Size 12 / 16 x 8 contacts
Size 20 x 21 contacts
Current Rating — Up to 35 Amps
per size 12 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 12: Crimp and PCB tail
Size 16: Crimp and PCB tail
Size 20: Crimp and PCB tail
69
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
75A Middle Drawer
Dimensions —
3.31" x 1.31" (84.1 x 33.3 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts —
Size 8 x 4 contacts
Size 12 x 9 contacts
Size 20 x 24 contacts
Current Rating — Up to 75 Amps
per size 8 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 8: Crimp, internal/external thread
and PCB tail
Size 12: Crimp and PCB tail
Size 20: Crimp and PCB tail Float Mount
Part Number 1648162-1
PCB Mount
Part Number 1648163-1
Float Mount
Part Number 6648167-1
PCB Mount
Part Number 1648168-1
Base Housing Part Numbers
Pin Housing Socket Housing
1648162-1 Float Mount 6648167-1 Float Mount w/
reinforced housing
1648163-1 PCB Mount 1648168-1 PCB Mount
70
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
125A Middle Drawer
Base Housing Part Numbers
Pin Housing Socket Housing
1648151-1 Float Mount 1648156-1 Float Mount
1648152-1 PCB Mount 1648157-1 PCB Mount
Dimensions —
3.15" x 1.31" (80.0 x 33.3 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts —
Size 4 x 2 contacts
Size 12 x 6 contacts
Size 20 x 32 contacts
Current Rating — Up to 125 Amps
per size 4 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 4: Crimp and internal/external
thread
Size 12: Crimp and PCB tail
Size 20: Crimp and PCB tail Float Mount
Part Number 1648151-1
PCB Mount
Part Number 1648152-1
Float Mount
Part Number 1648156-1
PCB Mount
Part Number 1648157-1
71
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
200A Middle Drawer
Dimensions —
3.31" x 1.31" (84.1 x 33.3 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts —
Size 4 x 2 contacts
Size 8 x 6 contacts
Size 12 x 3 contacts
Size 20 x 14 contacts
Current Rating — Up to 125 Amps
per size 4 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 4: Crimp and internal/external
thread
Size 8: Crimp, internal/external thread
and PCB tail
Size 12: Crimp and PCB tail
Size 20: Crimp and PCB tail
Base Housing Part Numbers
Pin Housing Socket Housing
1648134-1 1648135-1
Base Housing Part Numbers
Pin Housing Socket Housing
1648132-1 1648133-1
Dimensions —
2.76" x 1.24" (70.1 x 31.5 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts —
Size 12 x 4 contacts
Size 20 x 36 contacts
Current Rating — Up to 35 Amps
per size 12 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 12: Crimp and PCB tail
Size 20: Crimp and PCB tail
Square Drawer
72
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
Dimensions —
4.24" x 1.60" (107.8 x 40.7 mm)
Housing Variations — Various
guide pin configurations available.
Guides and Polarization —
Optional Steel Guide Pins with either
#6-32 or M3 internal thread
Available Contacts —
Size 0 x 2 contacts
Size 12 x 6 contacts
Size 16 x 12 contacts
Size 20 x 32 contacts
Current Rating — Up to 200 Amps
per size 0 contact
Contact Features — Hot-Plug size 12
contact option
Probe-proof size 0 contact option
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 0: Crimp and internal/external
thread
Size 12: Crimp and PCB tail
Size 16: Crimp and PCB tail
Size 20: Crimp and PCB tail
Top Drawer
Dimensions
—
4.24" x 1.60" (107.8 x
40.7 mm)
Housing Variations — Various guide
pin configurations available.
Guides and Polarization — Optional
Steel Guide Pins with either #6-32 or
M3 internal thread
Available Contacts —
Size 0 x 4 contacts
Size 12 x 11 contacts
Size 20 x 24 contacts
Current Rating — Up to 200 Amps
per size 0 contact
Contact Features — Hot-Plug size 12
contact option
Probe-proof size 0 contact option
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 0: Crimp and internal/external
thread
Size 12: Crimp and PCB tail
Size 20: Crimp and PCB tail
Double Drawer
Base Housing Part Numbers
Pin Housing Socket Housing
1648183-1 1648186-1
Optional guide posts are available for improved alignment. Consult Customer
Service for details.
Base Housing Part Numbers
Pin Housing Socket Housing
1648552-1 1648578-1
Optional guide posts are available for improved alignment. Consult Customer
Service for details.
Pin Side Socket Side
Pin Side Socket Side
73
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
Dimensions —
1.80" x 1.60" (45.7 x 40.7 mm)
Housing Variations — Various
guide pin configurations available.
Guides and Polarization —
Optional Steel Guide Pins with either
#6-32 or M3 internal thread
Available Contacts — Size 0 x 2
contacts
Current Rating — Up to 200 Amps
per contact
Contact Features — Probe-proof
size 0 contact option
Contact Sequencing — Standard only
Contact Terminations —
Size 0: Crimp and internal/external
thread
DualPower Drawer
Dimensions —
2.50" x 1.60" (63.5 x 40.7 mm)
Housing Variations — Various
guide pin configurations available.
Guides and Polarization —
Optional Steel Guide Pins with either
#6-32 or M3 internal thread
Available Contacts — Size 0 x 4
contacts
Current Rating — Up to 200 Amps
per contact
Contact Features — Probe-proof
size 0 contact option
Contact Sequencing — Standard only
Contact Terminations —
Size 0: Crimp and internal/external
thread
QuadPower Drawer
Base Housing Part Numbers
Pin Housing Socket Housing
1648549-1 1648575-1
Optional guide posts are available for improved alignment. Consult Customer
Service for details.
Base Housing Part Numbers
Pin Housing Socket Housing
1648548-1 1648574-1
Optional guide posts are available for improved alignment. Consult Customer
Service for details.
Pin Side Socket Side
Pin Side
Side Views
Front
Views
Side Views
Front Views
Socket Side
74
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
Dimensions —
4.84" x 1.21" (122.8 x 30.7 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts — Size 0 x 4
contacts
Current Rating — Up to 200 Amps
per contact
Contact Features — Probe-proof
size 0 contact option
Contact Sequencing — Standard only
Contact Terminations —
Size 0: Crimp and internal/external
thread
W5 Power Drawer
Dimensions —
3.00" x 1.18" (76.2 x 30.0 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts — Size 4 x 5
contacts
Current Rating — Up to 100 Amps
per contact
Contact Features — Probe-proof
size 0 contact option
Contact Sequencing — Standard only
Contact Terminations —
Size 4: Crimp and internal/external
thread
In-Line QuadPower Drawer
Base Housing Part Numbers
Pin Housing Socket Housing
1651493-1 1651494-1
Base Housing Part Numbers
Pin Housing Socket Housing
6651457-1 6651458-1
Front View Front View
Front View
Front View
75
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
Dimensions —
0.99" x 0.95" (25.0 x 24.0 mm)
Housing Variations — See Part
Numbers
Cable Socket to Panel Mount Pin
Guides and Polarization —
Polarization only
Available Contacts — Size 12 x 3
contacts
Current Rating — Up to 35 Amps
per size 12 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power
Contact Terminations —
Size 12: Crimp only
Dimensions —
1.34" x .76" (34.0 x 19.4 mm)
Housing Variations — See Part
Numbers
Cable Pin to PCB Mount Socket
Guides and Polarization —
Polarization only
Available Contacts — Size 12 x 4
contacts
Current Rating — Up to 35 Amps
per size 12 contact
Contact Sequencing — Standard only
Contact Terminations —
Size 12: Crimp Pin and PCB tail Socket
Note: Supplied as kit, including
contacts
P3S0 Drawer
P4S0 Drawer
Base Housing Part Numbers
Pin Housing Socket Housing
1766447-1 1766448-1
Base Housing Part Numbers
Pin Side Kit Socket Side Kit
1766449-1 1766450-1
76
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
Dimensions —
2.96" x 1.00" (75.0 x 25.4 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts — Size 12 x 10
contacts
Current Rating — Up to 35 Amps
per size 12 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power
Contact Terminations —
Size 12: Crimp and PCB tail
P10S0 Drawer
Dimensions —
2.50" x 1.11" (63.5 x 28.2 mm)
Housing Variations — See Part
Numbers
600 V High Voltage Design
Guides and Polarization — Built in
Available Contacts — Size 12 x 8
contacts
Current Rating — Up to 35 Amps
per size 12 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power
Contact Terminations —
Size 12: Crimp and PCB tail
HV8P Drawer
Base Housing Part Numbers
Pin Housing Socket Housing
1648127-1 1648128-1
Base Housing Part Numbers
Pin Housing Socket Housing
1648568-1 1648596-1
77
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
Dimensions —
5.45" x 1.35" (138.4 x 34.3 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts —
Size 4 x 6 contacts
Size 20 x 18 contacts
Current Rating — Up to 100 Amps
per size 4 contact
Contact Features — Standard
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 4: Crimp and internal/external
thread
Size 20: Crimp and PCB tail
P6S18 Drawer
Dimensions —
4.12" x 0.79" (104.5 x 20.1 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts —
Size 12 x 10 contacts
Size 20 x 22 contacts
Current Rating — Up to 35 Amps
per size 12 contact
Contact Features — Hot-Plug size 12
contact option
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 12: Crimp and PCB tail
Size 20: Crimp and PCB tail
P10S22 Drawer
Base Housing Part Numbers
Pin Housing Socket Housing
1766451-1 1766452-1
Base Housing Part Numbers
Pin Housing Socket Housing
6648211-1 6648212-1
78
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors (Continued)
Dimensions —
3.22" x 0.70" (81.8 x 17.8 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts — Size 20 x 30
contacts
Current Rating — Up to 5 Amps per
size 20 contact
Contact Features — Standard only
Contact Sequencing — Multi-level
for signal
Contact Terminations —
Size 20: Crimp and PCB tail
P0S30 Drawer
Dimensions —
4.31" x 0.70" (109.5 x 17.8 mm)
Housing Variations — See Part
Numbers
Guides and Polarization — Built in
Available Contacts —
Size 16 x 12 contacts
Size 20 x 12 contacts
Current Rating — Up to 15 Amps
per size 16 contact
Contact Features — Standard only
Contact Sequencing — Multi-level
for power and signal
Contact Terminations —
Size 16: Crimp and PCB tail
Size 20: Crimp and PCB tail
P12S12 Drawer
Base Housing Part Numbers
Pin Housing Socket Housing
6651202-1 6651203-1
Base Housing Part Numbers
Pin Housing Socket Housing
6651204-1 6651205-1
Contact Size #8 - For use in 75A and 200 A Middle Drawer
Termination Contact Dimensions A
Type Part Number in mm
Crimp, standard 1766192-1 0.43 [10.92]
Crimp, premate 1766197-1 0.48 [12.19]
PCB tail, standard 1766262-1 0.43 [10.92]
PCB tail, premate 1766263-1 0.48 [12.19]
79
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Standard Contacts
Pin Side Contacts
Contact Size #20 — For use in most drawer connectors
Termination Contact Dimensions A
Type Part Number in mm
Crimp, standard 1650155-1 0.32 [8.12]
Crimp, premate 1650161-1 0.47 [11.93]
Crimp, postmate 1650162-2 0.27 [6.85]
PCB tail, standard 1650283-1 0.32 [8.12]
PCB tail, premate 1650065-1 0.47 [11.93]
PCB tail, postmate 1650226-1 0.27 [6.85]
Contact Size #16 — For use in Mini Drawer, Lower Drawer, Top Drawer, and P12S12
Termination Contact Dimensions A
Type Part Number in mm
Crimp, standard 1766194-1 0.33 [8.38]
Crimp, premate 1766198-1 0.48 [12.19]
Crimp, postmate 1766199-1 0.29 [7.36]
PCB tail, standard 1766222-1 0.33 [8.38]
PCB tail, premate 1766223-1 0.48 [12.19]
PCB tail, postmate 1766818-1 0.29 [7.36]
Contact Size #12 — For use in Mini Drawer, Lower Drawer, 75A, 125A and 200A Middle Drawer;
Square Drawer, TOP Drawer & Double Drawer; P3S0 and P4S0, HV8P, P10SO, P10S22
Termination Contact Part Number Dimensions A
Type Gold Plated Silver Plated in mm
Crimp, standard 1650153-2 1766193-1 0.43 [10.92]
Crimp, premate 1650156-2 1766195-1 0.46 [11.68]
Crimp, postmate 1650158-2 1766196-1 0.39 [9.90]
PCB tail, standard — 1766245-1 0.43 [10.92]
PCB tail, premate 1650074-3 1766250-1 0.46 [11.68]
PCB tail, postmate 1658992-4 1766249-1 0.39 [9.90]
Note: For applications using the #12 hot-plug socket use of gold plated pins are recommended.
The ELCON Drawer Series
Connectors use standard
contacts across the
product line. This section
shows the standard
contacts available in
different sizes and various
lengths and termination
styles, with their respective
part numbers.
Contact Size #4 - For use in 125A and 200A Middle Drawer. P6S18 Drawer, W5 Power Drawer
Termination Contact Dimensions A
Type Part Number in mm
Crimp, Standard 1766232-1 0.51 [12.95]
1/4 - 20 x .050 DP
11766812-1 0.51 [12.95]
External Thread
M5 x 0.8 x 9.6 mm DP
M5 Internal Thread 1766283-1 0.51 [12.95]
80
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
Contact Size #12
Termination Contact
Type Part Number
Crimp 6648318-1
Hot-Plug Crimp 1648384-1
PCB Tail 6648374-1
Hot-Plug PCB Tail 1648387-1
ELCON Drawer Standard Contacts (Continued)
Contact Size #01-For use in Top Drawer, Double Drawer, DualPower & QuadPower, In-Line QuadPower
Termination Contact Dimensions A
Type Part Number in mm
Crimp 1766811-1 0.495 [12.57]
Probe-proof crimp21766819-1 0.430 [10.92]
1/4 - 20 x .050 DP 1766230-1 0.495 [12.57]
Internal thread
M6 x 1 x 12.7 mm DP 1766274-1 0.495 [12.57]
Internal thread
1/4 - 20 x .050 DP 1766269-1 0.430 [10.92]
Probe-proof/internal thread2
M6 x 1 x 12.7 mm DP 1766275-1 0.430 [10.92]
Probe-proof/Internal thread2
1/4 - 20 x .050 DP 1766268-1 0.495 [12.57]
External thread
M6 x 1 x 12.7 mm DP 1766231-1 0.495 [12.57]
External thread
1/4 - 20 x .050 DP 1766270-1 0.430 [10.92]
Probe-proof/external thread2
M6 x 1 x 12.7 mm DP 1766276-1 0.430 [10.92]
Probe-proof/external thread2
Notes: 1Contact Tyco Electronics for alternate contact terminations.
2Use only with probe-proof socket contacts.
3Crimp and threaded contact are insertable/removable.
Contact Size #20
Termination Contact
Type Part Number
Crimp 1648325-1
PCB Tail 1648382-1
Contact Size #16
Termination Contact
Type Part Number
Crimp 6648319-1
PCB Tail 6648383-1
Socket Side Contacts
Pin Side Contacts ((CCoonnttiinnuueedd))
Note: For applications using the #12 hot-plug socket, the use of gold plated
pins are recommended (see page 79).
81
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
PageHead_12_HelvCdBd (Continued)
Cable Mounted Products
Note: All part numbers are RoHS compliant.
Power Connectors & Interconnection Systems
ELCON Drawer Standard Contacts (Continued)
Non-Standard Contacts
Contacts with pin lengths
and terminations other than
standard are available.
Consult customer service
if your design requires
contacts different from the
ones shown in this catalog.
Contact Size #4
Termination Contact
Type Part Number
Crimp, Standard 6648434-1
1/4 - 20 x .050 DP
External Thread 6648435-1
M5 x 0.8 x 9.6 mm DP
M5 Internal Thread 6648335-1
Contact Size #01
Termination Contact
Type Part Number
Crimp 6648405-1
Probe-proof crimp26648418-1
1/4 - 20 x .050 DP 6648416-1
Internal thread
M6 x 1 x 12.7 mm DP 6648428-1
Internal thread
1/4 - 20 x .050 DP 6648419-1
Probe-proof/internal thread2
M6 x 1 x 12.7 mm DP 6648429-1
Probe-proof/Internal thread2
1/4 - 20 x .050 DP 6648417-1
External thread
M6 x 1 x 12.7 mm DP 6648430-1
External thread
1/4 - 20 x .050 DP 6648420-1
Probe-proof/external thread2
M6 x 1 x 12.7 mm DP 6648431-1
Probe-proof/external thread2
Contact Size #8
Termination Contact
Type Part Number
Crimp 6648317-1
PCB Tail 6648400-1
Socket Side Contacts
Notes: 1Contact Tyco Electronics for alternate contact terminations.
2Use only with probe-proof Pin contacts.
3Crimp and threaded contact are insertable/removable.
