10-2J12.1065 - Single-LED
10-2J12.1065 - Single-LED
Attention: The preview is based on a sample product. This can
differ from your current configuration.
Attribute
Dom. Wavelength 525 nm
Illumination colour Green
Lumi. Intensity 1 value 1050 mcd
Lumi. Intensity 1050 mcd
Operation current 4 - 7 mA ±15 %
Operating voltage 24 V AC/DC +10%
Operating Voltage/Current 24 V +10% 4 / 7 mA ±15 %
Socket T1 ¾ MG
Weight 0.002 kg
Stand: 03.01.2021
10-2J12.1065 - Single-LED
Wiring diagrams
Additional information
Due to high surface temperatures, the series resistor must not be
soldered directly to the terminals of the equipment (use a terminal
plate)
When using AC/DC types with AC operation, slight flickering can
occur
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified versions are built with a protection diode (halve wave
rectifier) in series and the LED
Luminosity and wave length variations caused by LED
manufacturing processes may cause slight differences regarding
the illumination. The customer has to decide what resistor shall be
used to the LED
Where supply voltages are over 48 V, a voltage-reduction element
(external protective series resistor) must be used.
Keep to the country specific safety instructions
Powered by TCPDF (www.tcpdf.org)
Stand: 03.01.2021
