3MTM Four-Wall Header .100" x .100" Latch/Ejector, Straight and Right Angle 3000 Series * Military (with 3M's 3518 & N3518 polarizing key) and centerbump polarization * Optional ejector latches * Mounting holes for securing header to board * Optional polarizing posts available * High temperature insulator option suitable for "no lead" soldering operations * High temperature option suitable for reflow soldering using "paste in hole" techniques * Solder tail option * See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3Mconnector.com for compliance information (RIA E1 & C1 apply) Date Modified: July 5, 2010 Physical TS-0772-K Sheet 1 of 4 Insulator: Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT) - (High Temp Option) Flammability: UL 94V-0 Color: Gray (PBT), Black (PCT) Contact: Material: Copper Alloy Plating: Underplating: Nickel - Overall (See Ordering Information) Wiping Area: 30 " [ 0.76 m ] Gold Solder Tails: Tin Lead or Matte Tin (See Ordering Information) Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 2 A (EIA 364-70) Insulation Resistance: >1 x 109 at 500 VDC Withstanding Voltage: 1,000 VRMS at Sea Level Environmental Temperature Rating: -55C to +105C Process Rating: 260C - (High Temp PCT insulator verson), single pass, (profile per J-STD-020C) (PBT insulator version), maximum insulator temperature 191C (solder wave processonly) Moisture Sensitivity Level: 1 (per J-STD-020C) High Temp. (PCT) versions only UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100" x .100" Latch/Ejector, Straight and Right Angle -X0XX Header without Latch Ejector 3000 Series -X3XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief -X2XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief .68 [17.3] .08 [2.0] .08 [2.0] .573 .010 [ 14.55 ] .424 .010 [ 10.77 ] 1.07 Ref [27.2] .97 Ref [24.6] A .025 .002 Sq Typ [ 0.64 ] .37 Ref [9.4] .46 Ref [11.7] D .24 [6.1] .100 2.54 .020 0.51 .28 7.1 REF. .30 [7.6] .25 6.4 .34 8.6 .13 3.3 .100 2.54 2X O .100 [2.54] SEE NOTE #2 Dim. E CL REF. POSITION #1 B "Y" F Typ Section A-A (Straight) Position 1 Orientation Triangle .025 .002 Sq Typ [ 0.64 ] .24 [6.1] F Typ CL .30 [7.6] "Y" Dim. E .049 Ref [1.24] .100 Ref [2.54] .21 [5.3] Notch A (See Table 1 & Note1) Notch B (See Table 1) Notch C (See Table 1 & Note 1) .16 [4.1] A B .68 [17.3] .12 [3.0] .35 [8.9] .020 [0.51] 2X o .100 [2.54] (See Note 2) A B C .197 [5.00] .20 [5.1] A Section B-B (Right Angle) C 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com TS-0772-K Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100" x .100" Latch/Ejector, Straight and Right Angle 3000 Series Table 1 Dimensions Pin Qty 3M Part Number A B C D Polarizing Notches 10 3793 1.265 (32.13) 1.104 (28.04) 0.865 (21.97) 0.705 (17.91) BC 14 3314 1.465 (37.21) 1.304 (33.12) 1.065 (27.05) 0.905 (22.99) BC 16 3408 1.565 (39.75) 1.404 (35.66) 1.165 (29.59) 1.005 (25.53) ABC Inch (mm) Tolerance Unless Noted .00 .0 Inch 20 3428 1.765 (44.83) 1.604 (40.74) 1.365 (34.67) 1.205 (30.61) ABC 24 3627 1.965 (49.91) 1.804 (45.82) 1.565 (39.75) 1.405 (35.69) ABC ABC 26 3429 2.065 (52.45) 1.904 (48.36) 1.665 (42.29) 1.505 (38.23) 30 3440 2.265 (57.53) 2.104 (53.44) 1.865 (47.37) 1.705 (43.31) ABC 34 3431 2.465 (62.61) 2.304 (58.52) 2.065 (52.45) 1.905 (48.39) ABC ABC 40 3432 2.765 (70.23) 2.604 (66.14) 2.365 (60.07) 2.205 (56.01) 50 3433 3.265 (82.93) 3.104 (78.84) 2.865 (72.77) 2.705 (68.71) ABC 60 3372 3.765 (95.63) 3.604 (91.54) 3.365 (85.47) 3.205 (81.41) ABC 64 3764 3.965 (100.71) 3.804 (96.62) 3.565 (90.55) 3.405 (86.49) ABC .1 .000 .01 .005 [ ] Dimensions for Reference only Table 2 3M Part Number Suffix -5XX2 -6XX2 -5X03 -6X03 Contact Tail Dim E Pin Cross Section Dim G Solder Tail for .062 (1.57) Thick PC Board .112 .010 (2.84) Dim F .0245 .0005 (0.622) Diagonals .028 .001 (0.71) Corner Radii .0075 Ref (0.191) 0.035 .003 (0.89) (See Note 3) Solder Tail for 0.94 (2.39) to .125 (3.18) Thick PC Board .155 .010 (3.94) .0245 .0005 (0.622) .028 .001 (0.71) .0075 Ref (0.191) 0.035 .003 (0.89) o.106 or o.116 [2.95] [2.69] or o.116 o.106 [2.69] [2.95] (See Note 2) .300 [7.62] Side to Side Stackability "Y" .41 (See Note 2) [10.4] Max to Edge of PCB Dim G for Daisy Chain Dim G "Y" CL .029 [0.74] Position 1 .060 [1.52] .100 .003 [2.54] .100 .003 [2.54] .352 [8.94] .100 .003 [2.54] CL Position 1 .100 .003 [2.54] .232 [5.89] C B Recommended Mounting Hole Pattern (Straight) Recommended Mounting Hole Pattern (Right Angle) Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518). 2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole may be used. 3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. See page 4 for kink position details (K2 version). 4. Contact your 3M sales representative for custom requirements. X3XXX-XXXXXX Ordering Information N = High Temp Black (PCT)/(RB Plating Req'd) Blank = Std. Temp Gray (PBT) /(Blank or UB Pltg. Req'd.) 3M Part Number (See Table 1) Pin Configuration 5 = Right Angle Solder Tails 6 = Straight Solder Tails 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com Latch/Ejector System 0 = No Latch/Ejector installed 2 = Short Roll Pin Latch/Ejectors 3 = Long Roll Pin Latch/Ejectors 5 = Short, Snap-In Latch/Ejectors 6 = Long, Snap-In Latch/Ejectors Plating RB = 30 " [ 0.76 m ] Gold and 200 " [ 5.08 m ] Matte Tin over 100 " [ 2.54 m ] Nickel (App. E1 & C1 Apply) Blank or UB = 30 " (0.76 m ] Gold and 200 " [ 5.08 m ] Tin Lead over 100 " [ 2.54 m ] Nickel (App. E3 & C2 Apply) Tail 02 = for .062 [1.57] thick board 03 = for .094 to .125 [2.39 to 3.18] thick board K2 = kinked for .062 [1.57] thick board TS-0772-K Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100" x .100" Latch/Ejector, Straight and Right Angle 3000 Series Part Customization Polarizing Post This spec sheet details our standard offering. 3M has several capabilities that can provide a part tailored to your specific needs. Ask your 3M sales representative or customer service for more details. Both snap in and roll pin latches may be ordered separately. Snap in and roll style latches are dimensionally and functionally equivalent. If ordering snap-in or roll pin style latches separately, please use the below chart. .318 [8.08] 3201-4 LCP Black 3201-5 PBT Gray .100 Dia [2.54] Note: Insert Post into one mounting hardware hole on bottom of header. Set post to protrude .115" [2.92]. 2500 & 3000 Series Shrouded Header Total Number of Pins Number of Tails Kinked 10 4 3 4 7 8 14 4 3 4 11 12 16 4 3 4 13 14 20 4 3 4 17 18 24 4 3 4 21 22 Black 26 4 3 4 23 24 * Selective pin removal (ATA or other compatability) * Wire wrap tails styles 30 4 5 6 25 26 34 4 7 8 27 28 36 4 7 8 27 28 40 4 7 8 33 34 50 4 7 8 43 44 60 4 11 12 49 50 64 4 11 12 53 54 Short Latch Long Latch Latch Style Color Standard Temperature (PBT) 3505-2 3505-3 Roll Pin Gray High Temperature (PCT) N3505-2B N3505-3B Roll Pin Black High Temperature (PBT) 3505-30 3505-31 Snap-In Gray High Temperature (PPA) N3505-30B N3505-31B Snap-In Positions Kinked Kinked Tail Detail: Kink is located .05" below bottom surface of plastic. External radius of kink toward part centerline. Mounting Hardware 3341-5 (Installed from bottom of board) .50 [12.7] .31 [7.9] Panhead Thread Cutting Screw: #4-24 X 5/16" Type: USA Std BT, Federal BG Polarizing Keys 3341-6 (Must be inserted prior to latch on vertical headers) Hex Head Bolt, Nut and Washer Bolt - #2-56 X 1/2" 3341-5 & 6 Material - Stainless Steel Dim A N3518 LCP Black .02 3518 PBT Gray .02 Breakaway Tab .09 [2.3] .34 Ref [8.6] .15 [3.8] A Note: #2216 B/A Scotchweld can be used to adhere keys. TS-0772-K Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. (c) 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.