82723877U500 - Belden Wire & Cable Company

82723 Paired - Double-Pair Cable

For more information please

call

1-800-Belden1

See Put-ups and Colors

Description:

22 AWG stranded (7x30) TC conductors, plenum, FEP insulation, twisted pairs, individually shielded w/Beldfoil® (100% coverage), 22

AWG stranded TC drain wire, Flamarrest® jacket.

PHYSICAL CHARACTERISTICS:

CONDUCTOR:

Number of Pairs 2

Total Number of Conductors 4

AWG 22

Stranding 7x30

Conductor Material TC - Tinned Copper

INSULATION:

Insulation Material FEP - Fluorinated Ethylene Propylene

Lay Length 1.5 in.

Twists/ft. 8

Pair Color Code Chart :

Number Color

1 Red & Black Number Color

2 Green & White

INNER SHIELD:

Inner Shield Material Trade Name Beldfoil® (Z-Fold®)

Inner Shield Type Tape

Inner Shield Material Aluminum Foil-Polyester Tape

Inner Shield % Coverage 100 %

Inner Shield Drain Wire AWG 24

Inner Shield Drain Wire Stranding 7x32

Inner Shield Drain Wire Conductor Material TC - Tinned Copper

OUTER SHIELD:

Outer Shield Material Unshielded

OUTER JACKET:

Outer Jacket Material Trade Name Flamarrest®

Page 1 of

82723 Paired - Double-Pair Cable

Outer Jacket Material LS PVC - Low Smoke Polyvinyl Chloride

OVERALL NOMINAL DIAMETER:

Overall Nominal Diameter .153 in.

MECHANICAL CHARACTERISTICS:

Operating Temperature Range 0°C To +75°C

Bulk Cable Weight 17.5 lbs/1000 ft.

Max. Recommended Pulling Tension 46 lbs.

Min. Bend Radius (Install) 1.5 in.

APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:

APPLICABLE STANDARDS:

NEC/(UL) Specification CMP

CEC/C(UL) Specification CMP

EU CE Mark (Y/N) Yes

EU RoHS Compliant (Y/N) Yes

EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005

FLAME TEST:

UL Flame Test NFPA 262

C(UL) Flame Test FT6

PLENUM/NON-PLENUM:

Plenum (Y/N) Y

Non-Plenum Number 8723

ELECTRICAL CHARACTERISTICS:

Nom. Characteristic Impedance 36 Ohms

Nom. Capacitance Conductor to Conductor @ 1 KHz 43 pF/ft

Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz 75 pF/ft

Nominal Velocity of Propagation 62 %

Nom. Conductor DC Resistance @ 20 Deg. C 14.7 Ohms/1000 ft

Nom. Inner Shield DC Resistance 15 Ohms/1000 ft

Max. Operating Voltage - UL 300 V RMS

Max. Recommended Current 2.3 Amps per conductor @25°C

PUT-UPS AND COLORS:

Item Description Put-Up (ft.) Ship Weight (lbs.) Jacket Color Notes

82723 8771000 2 PR #22 FEP FS

FLRST 1000 19 NATURAL

82723 877U1000 2 PR #22 FEP FS

FLRST U1000 20 NATURAL

Page 2 of

82723 Paired - Double-Pair Cable

82723 877U2000 2 PR #22 FEP FS

FLRST U2000 40 NATURAL

82723 877U500 2 PR #22 FEP FS

FLRST U500 10.5 NATURAL

C = CRATE REEL PUT-UP.

Revision Number: 1 Revision Date: 07-27-2005

Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication,

information and specifications described herein are subject to error or omission and to change without notice, and the listing of such

information and specifications does not ensure product availability.

Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,

statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or

exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,

negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described

herein.

All sales of Belden products are subject to Belden's standard terms and conditions of sale.

Belden CDT Electronics Division believes this product to be in compliance with the following environmental regulations: California

Proposition 65 Consent Judgment For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS

(Directive 2002/95/EC, 27-Jan-2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our

Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR

(Directive 2003/11/EC, 6-Feb-2003). The information provided in this Product Disclosure, and the identification of materials listed as

reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its

publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any

other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality

specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of

legislation and regulations based on their individual usage of the product.

Belden CDT Electronics Division declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended

by directive 93/68/EEC.

Page 3 of