AXICOM Telecom-, Signal and RF Relays P1 V23026 Relay 108-98009 * Aug. 08 Rev. F * ECOC: JM10 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this datasheet are for reference purpose only and are subject to change without notice. Specifications are subject to change without notice. Index UL 508 File No. E 111441 Dimensions Coil Operating Range Coil Data and Ordering Information Contact Data Insulation General Data Packing All specifications subject to change. Consult Tyco Electronics for latest specifications. 4 5 6 7 8 8 10 2 of 12 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay 1 pole telecom / signal relay, polarized, Through Hole Type (THT) or Surface Mount Technology (SMT), Relay types: non-latching with 1 coil latching with 2 coils latching with 1 coil ROHS compliant (Directive 2002/95/EC) as per product date code 0429. Features - Directly triggerable with TTL standard modules such as ALS, HCT and ACT - Slim line 13.5 x 7.85 mm, 0.531 x 0.309 inch - Switching current 1 A - 1 changeover contact (1 form C / SPDT) - Bifurcated contacts - Immersion cleanable - High sensitivity results in low nominal power consumption 65 to 130 mW for non-latching 30 to 150 mW for latching - Surge voltage resistance between contact and coil: - 2.5 kV (2 / 10 s) meets the Bellcore Requirement GR-1089 - 1.5 kV (10 / 160 s) meets FCC Part 68 Typical applications Insulation category - Automotive equipment CAN bus, imobilizer - Office equipment - Measurement and control equipment - Medical equipment - Safety equipment Basic insulation coil/contacts according to IEC/EN 60950 Clearance > 0.75 mm Creepage distance > 0.75 mm Options - FCC version on request. Testing of open contacts with surge voltage in accordance with FCC 68.302 (1.5 kV, 10/160 s) All specifications subject to change. Consult Tyco Electronics for latest specifications. 3 of 12 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay Dimensions Dimensions in mm THT V23026-x1xxx-B201 L W H T T1 T2 S S1 S2 mm 13.00 0.10 7.60 0.10 6.90 - 0.20 3.50 - 0.20 N/A 5.08 0.15 0.30 0.10 N/A N/A SMT V23026-x1xxx-B201 inch 0.512 0.004 0.299 0.004 0.272 - 0.008 0.138 - 0.008 N/A 0.200 0.006 0.012 0.004 N/A N/A mm 13.40 0.10 7.75 0.10 8.00 - 0.20 N/A 10.90 - 0.50 5.08 0.15 N/A 0.85 0.10 0.20 - 0.15 THT Version inch 0.528 0.004 0.305 0.004 0.315 - 0.008 N/A 0.429 - 0.020 0.200 0.006 N/A 0.033 0.004 0.008 - 0.006 SMT Version Coplanarity 0.1mm Mounting hole layout Solder pad layout View onto the component side of the PCB (top view) View onto the component side of the PCB (top view) Terminal assignment Relay - top view Contact release or reset condition, coil polarity to set the relay Non-latching type Latching type, 1 coil Latching type, 2 coils not energized condition reset condition reset condition All specifications subject to change. Consult Tyco Electronics for latest specifications. Contacts are shown in reset condition. Both coils can be used either as set or reset coil. 4 of 12 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay Coil Operating Range Unom Coil Voltage [U/Unom] 65 mW 130 mW Umax. at 0 A Umax. at - 1 A Umax. at 0 A = Nominal coil voltage = Upper limit of the operative range of Umax. the coil voltage (limiting voltage) when coils are continously energized = Lower limit of the operative range of Uop. min. the coil voltage (reliable operate voltage) = Lower limit of the operative range of Urel. min. the coil voltage (reliable release voltage) Unom. nominal coil voltage Uop. min. Urel. min. Ambient Temperature [C] 65 mW Latching 32 mW Latching Coil Voltage [U/Unom] Umax. - 5 % coil duty at 1 A Umax. - 100 % coil duty at 0 A Umax. - 5 % coil duty at 0A Unom. nominal coil voltage Uset min. Ambient Temperature [C] All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 12 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay Coil Data (values at 23 C) Nominal voltage Unom Vdc Operate/set voltage range Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance Minimum voltage Umin Maximum voltage Umax Vdc Vdc Vdc mW / 10 % 8.80 14.50 25.50 35.00 50.00 0.30 0.50 0.90 1.20 2.40 66 68 70 64 128 137 370 1165 2250 4500 THT, non-latching, 1 coil 3 2.25 5 3.75 9 6.75 12 9.00 24 18.00 Relay code V23026A1006B201 V23026A1001B201 V23026A1005B201 V23026A1002B201 V23026A1004B201 THT, latching, 2 coils (coils I and II are identical) 3 2.25 8.55 2.25 69 130 V23026B1106B201 5 3.75 14.75 3.75 64 390 V23026B1101B201 9 6.75 26.00 6.75 68 1200 V23026B1105B201 12 9.00 29.00 9.00 96 1500 V23026B1102B201 24 A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 ) Tyco part number 1-1393774-7 1393774-1 1-1393774-5 1393774-8 1-1393774-2 1393775-3 3-1393774-4 1393775-2 3-1393774-5 THT, latching, 1 coil 3 2.25 5 3.75 9 6.75 12 9.00 24 18.00 13.00 20.00 35.00 50.00 50.00 -2.25 -3.75 -6.75 -9.00 -18.00 30 34 38 32 128 300 740 2160 4500 4500 V23026C1056B201 V23026C1051B201 V23026C1057B201 V23026C1052B201 V23026C1054B201 2-1393774-6 2-1393774-0 2-1393774-7 2-1393774-1 2-1393774-4 SMT, non-latching, 1 coil 3 2.25 5 3.75 9 6.75 12 9.00 24 18.00 8.00 13.30 24.00 35.00 50.00 0.30 0.50 0.90 1.20 2.40 80 80 80 80 128 113 313 1015 1800 4500 V23026D1026B201 V23026D1021B201 V23026D1025B201 V23026D1022B201 V23026D1024B201 1393776-8 1393776-3 1422015-9 1393776-4 1393776-7 SMT, latching, 2 coils (coils I and II are identical) 3 2.25 8.55 2.25 69 130 V23026E1106B201 5 3.75 14.75 3.75 64 390 V23026E1101B201 9 6.75 26.00 6.75 68 1200 V23026E1105B201 12 9.00 29.00 9.00 96 1500 V23026E1102B201 24 A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 ) SMT, latching, 1coil 9 3.75 12 9.00 24 20.00 -3.75 34 740 V23026F1051B201 50.00 -9.00 32 4500 V23026F1052B201 A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (4500 ) 1393777-3 1422015-6 1393777-2 1393776-9 1422015-8 4-1393774-3 Further coil versions e.g. 1.5 V, 9 V and 15 V are available on request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 6 of 12 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay Contact Data Number of contacts and type Contact assembly 1 changeover contact Bifurcated contact Contact material Palladium nickel, gold-rhodium covered Limiting continuous current at max. ambient temperature 1A Maximum switching current 1A Maximum swichting voltage 125 Vdc 150 Vac Maximum switching capacity 30 W, 60 VA Thermoelectric potential < 100 V Initial contact resistance / measuring condition: 10 mA / 20 mV < 50 m Electrical endurance at 12 V / 10 mA at 6 V / 100 mA at 30 V / 1000 mA Mechanical endurance UL contact ratings typ. 5 x 107 operations typ. 1 x 107 operations typ. 1 x 104 operations typ. 109 operations 30 Vdc / 1 A 65 Vdc / 0.46 A 150 Vac / 0.46 A Max. DC Load Breaking Capacity All specifications subject to change. Consult Tyco Electronics for latest specifications. 7 of 12 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay Insulation Insulation resistance at 500 Vdc > 109 Dielectric test voltage (1 min) between coil and contacts (Relay with 1 coil) 1500 Vrms between open contacts 500 Vrms Surge voltage resistance according to Bellcore TR-NWT-001089 (2 / 10 s) between coil and contacts (Relay with 1 coil) between open contacts 2500 V on request 2000 V according to FCC 68 (10 / 160 s) between coil and contacts (Relay with 1 coil) between open contacts Insulation according to IEC / EN 60950 1500 V on request 1500 V Basic insulation Clearance 0.75 mm Creepage distance 0.75 mm High Frequency Data Capacitance between coil and contacts max. 6 pF between open contacts max. 5 pF RF Characteristics Isolation at 100 / 900 MHz Insertion loss at 100 / 900 MHz V.S.W.R. at 100 / 900 MHz - 30.0 dB / - 18.0 dB - 0.12 dB / - 1.9 dB 1.06 / 1.75 General Data Operate time at Unom typ. / max. 1 ms / 2 ms Reset time (latching) at Unom , typ. / max. 1 ms / 2 ms Release time without diode in parallel (non-latching), typ. / max. 0.4 ms / 1 ms Release time with diode in parallel (non-latching), typ. / max. 1.2 ms / 2 ms Bounce time at closing contact, typ. / max. Maximum switching rate without load Ambient temperature Thermal resistance Maximum permissible coil temperature Vibration resistance (function) 1 ms / 3 ms 200 operations/s -40 C ... +70 C, +85 C on request < 130 K/W 85 C 20 G, 200 to 2000 Hz 40 G, 10 to 200 Hz Shock resistance, half sinus, 11 ms Degree of protection / Environmental protection Needle flame test Mounting position Processing information 50 G (function) immersion cleanable, IP 67 / RT III application time 20 s, no burning < 15s any Ultrasonic cleaning possible Weight (mass) max. 2 g Terminal surface SnCu 0.7 Moisture sensitive level (JEDEC J-STD-020B) - SMD types Resistance to soldering heat MSL 3 265 C / 10 s All data refers to 23 C unless otherwise specified. All specifications subject to change. Consult Tyco Electronics for latest specifications. 8 of 12 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay Recommended Soldering Conditions Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020B 20 - 40 sec Temperature C 240 C Full line: typical Dotted line: process limits 180 C 130 C forced cooling 100 C Vapor Phase Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Temperature C Resistance to soldering heat - Reflow profile Time (s) Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Temperature C Recommended reflow soldering profile Time (s) Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) All specifications subject to change. Consult Tyco Electronics for latest specifications. 9 of 12 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay Packing Dimensions in mm 13.80.2 Tube for THT version 40 relays per tube 2`000 relays per box 11.60.2 Tape and reel for SMT version 480 relays per reel 2`400 per box Reel dimension All specifications subject to change. Consult Tyco Electronics for latest specifications. 10 of 12 AXICOM 108-98009 Rev. F Telecom-, Signal and RF Relays P1 V23026 Relay IM Relays D2n Relays 4th generation slim line - low profile polarized 2 c/o telecom signal relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G relay on the market. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The IM relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height. 2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x10 mm board space and 11 mm height. P2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The P2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. FX2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FX2 relay is tested according CECC/ IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. FT2 / FU2 Relays P1 Relays Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version. W11 Relays Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. Reed Relays High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version. Cradle Relays 3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FT2/FU2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. FP2 Relays Other Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV - 10 / 160 s). The FP2 is tested according CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height. We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional. MT2 2nd generation non polarized, non latching 2 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 150/200/300/400 and 550 mW. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x 10 mm board space and 11 mm height. High Frequency Relays HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics in a small package. All HF series relays are suitable for SMD soldering processes. Available as non latching or latching versions with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 V, a coil power consumption of 140 mW or 70 mW (single coil latching types). HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm. 50 W hot switching and 50 W RF power carry capability. Dimensions 14.6 x 7.3 x 10.3 mm. HF3S: High performance, high power RF relay suitable up to 3 GHz, 50 W hot switching and 150 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. HF6: High performance, high power RF relay suitable up to 6 GHz, 50 W hot switching and 50 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. All specifications subject to change. Consult Tyco Electronics for latest specifications. 11 of 12 Tyco Electronics Logistics AG Werk Axicom Au Seestrasse 295 CH-8804 Au-Wadenswil / Switzerland Phone +41 44 782 91 11 Fax +41 44 782 90 00 E-mail: axicom@tycoelectronics.com Tyco Electronics Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: axicom@tycoelectronics.com Tyco Electronics EC Trutnov s.r.o. Komenskeho 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com AXICOM Telecom-, Signal and RF Relays Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752