Telecom-, Signal and RF Relays
AXICOM
P1 V23026 Relay
108-98009 • Aug. 08 Rev. F • ECOC: JM10
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 2 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Index
Dimensions 4
Coil Operating Range 5
Coil Data and Ordering Information 6
Contact Data 7
Insulation 8
General Data 8
Packing 10
Disclaimer
While Tyco Electronics has made every reasonable effort
to ensure the accuracy of the information in this datasheet,
Tyco Electronics does not guarantee that it is error-free,
nor does Tyco Electronics make any other representati-
on, warranty or guarantee that the information is accurate,
correct, reliable or current. Tyco Electronics reserves the
right to make any adjustments to the information contai-
ned herein at any time without notice. Tyco Electronics
expressly disclaims all implied warranties (and all express
warranties, except as otherwise stated in this datasheet)
regarding the information contained herein, including but
not limited to any implied warranties or merchantability or
tness for a particular purpose. It is recommended that
you test any new or replacement product before incorpo-
rating into a system.
The dimensions in this datasheet are for reference purpo-
se only and are subject to change without notice. Speci-
cations are subject to change without notice.
UL 508 File No. E 111441
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 3 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
1 pole telecom / signal relay, polarized,
Through Hole Type (THT) or
Surface Mount Technology (SMT),
Relay types: non-latching with 1 coil
latching with 2 coils
latching with 1 coil
ROHS compliant (Directive 2002/95/EC) as per
product date code 0429.
Features
Directly triggerable with TTL standard modules
such as ALS, HCT and ACT
Slim line 13.5 x 7.85 mm, 0.531 x 0.309 inch
Switching current 1 A
1 changeover contact (1 form C / SPDT)
Bifurcated contacts
Immersion cleanable
High sensitivity results in low nominal power
consumption
65 to 130 mW for non-latching
30 to 150 mW for latching
Surge voltage resistance between contact and coil:
2.5 kV (2 / 10 µs) meets the Bellcore
Requirement GR-1089
1.5 kV (10 / 160 µs) meets FCC Part 68
Typical applications
Automotive equipment
CAN bus, imobilizer
Ofce equipment
Measurement and control equipment
Medical equipment
Safety equipment
Options
FCC version on request. Testing of open contacts
with surge voltage in accordance with FCC
68.302 (1.5 kV, 10/160 µs)
Insulation category
Basic insulation coil/contacts according to
IEC/EN 60950
Clearance > 0.75 mm
Creepage distance > 0.75 mm
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 4 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Dimensions Dimensions in mm
THT Version
Mounting hole layout
View onto the component side of the PCB
(top view)
Terminal assignment
Relay – top view
Contact release or reset condition, coil polarity to set the relay
Non-latching type
not energized condition
Latching type, 1 coil
reset condition
Latching type, 2 coils
reset condition Contacts are shown in
reset condition. Both
coils can be used either
as set or reset coil.
THT
V23026-x1xxx-B201
SMT
V23026-x1xxx-B201
mm inch mm inch
L
W
H
13.00 ± 0.10
7.60 ± 0.10
6.90 – 0.20
0.512 ± 0.004
0.299 ± 0.004
0.272 – 0.008
13.40 ± 0.10
7.75 ± 0.10
8.00 – 0.20
0.528 ± 0.004
0.305 ± 0.004
0.315 – 0.008
T
T1
T2
S
S1
S2
3.50 – 0.20
N/A
5.08 ± 0.15
0.30 ± 0.10
N/A
N/A
0.138 – 0.008
N/A
0.200 ± 0.006
0.012 ± 0.004
N/A
N/A
N/A
10.90 – 0.50
5.08 ± 0.15
N/A
0.85 ± 0.10
0.20 – 0.15
N/A
0.429 – 0.020
0.200 ± 0.006
N/A
0.033 ± 0.004
0.008 – 0.006
SMT Version
Solder pad layout
View onto the component side of the PCB
(top view)
Coplanarity ≤ 0.1mm
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Coil Operating Range
Unom = Nominal coil voltage
Umax. = Upper limit of the operative range of
the coil voltage (limiting voltage)
when coils are continously energized
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate
voltage)
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release
voltage)
Umax. at 0 A
Umax. at - 1 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0 A
65 mW
130 mW
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Unom. nominal coil voltage
Umax. - 100 % coil duty at 0 A
65 mW Latching
32 mW Latching
Umax. - 5 % coil duty at 1 A
Umax. - 5 % coil duty at 0 A
Uset min.
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 6 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Coil Data (values at 23 °C) Ordering Information
Nominal
voltage
Unom
Operate/set voltage range Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
THT, non-latching, 1 coil
32.25 8.80 0.30 66 137 V23026A1006B201 1-1393774-7
5 3.75 14.50 0.50 68 370 V23026A1001B201 1393774-1
96.75 25.50 0.90 70 1165 V23026A1005B201 1-1393774-5
12 9.00 35.00 1.20 64 2250 V23026A1002B201 1393774-8
24 18.00 50.00 2.40 128 4500 V23026A1004B201 1-1393774-2
THT, latching, 2 coils (coils I and II are identical)
32.25 8.55 2.25 69 130 V23026B1106B201 1393775-3
5 3.75 14.75 3.75 64 390 V23026B1101B201 3-1393774-4
96.75 26.00 6.75 68 1200 V23026B1105B201 1393775-2
12 9.00 29.00 9.00 96 1500 V23026B1102B201 3-1393774-5
24 A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 Ω)
THT, latching, 1 coil
32.25 13.00 -2.25 30 300 V23026C1056B201 2-1393774-6
5 3.75 20.00 -3.75 34 740 V23026C1051B201 2-1393774-0
96.75 35.00 -6.75 38 2160 V23026C1057B201 2-1393774-7
12 9.00 50.00 -9.00 32 4500 V23026C1052B201 2-1393774-1
24 18.00 50.00 -18.00 128 4500 V23026C1054B201 2-1393774-4
SMT, non-latching, 1 coil
32.25 8.00 0.30 80 113 V23026D1026B201 1393776-8
5 3.75 13.30 0.50 80 313 V23026D1021B201 1393776-3
96.75 24.00 0.90 80 1015 V23026D1025B201 1422015-9
12 9.00 35.00 1.20 80 1800 V23026D1022B201 1393776-4
24 18.00 50.00 2.40 128 4500 V23026D1024B201 1393776-7
SMT, latching, 2 coils (coils I and II are identical)
32.25 8.55 2.25 69 130 V23026E1106B201 1393777-3
5 3.75 14.75 3.75 64 390 V23026E1101B201 1422015-6
96.75 26.00 6.75 68 1200 V23026E1105B201 1393777-2
12 9.00 29.00 9.00 96 1500 V23026E1102B201 1393776-9
24 A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 Ω)
SMT, latching, 1coil
93.75 20.00 -3.75 34 740 V23026F1051B201 1422015-8
12 9.00 50.00 -9.00 32 4500 V23026F1052B201 4-1393774-3
24 A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (4500 Ω)
Further coil versions e.g. 1.5 V, 9 V and 15 V are available on request.
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 7 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Contact Data
Number of contacts and type 1 changeover contact
Contact assembly Bifurcated contact
Contact material Palladium nickel, gold-rhodium covered
Limiting continuous current at max. ambient temperature 1 A
Maximum switching current 1 A
Maximum swichting voltage 125 Vdc
150 Vac
Maximum switching capacity 30 W, 60 VA
Thermoelectric potential < 100 µV
Initial contact resistance / measuring condition: 10 mA / 20 mV < 50 m
Electrical endurance at 12 V / 10 mA
at 6 V / 100 mA
at 30 V / 1000 mA
typ. 5 x 107 operations
typ. 1 x 107 operations
typ. 1 x 104 operations
Mechanical endurance typ. 109 operations
UL contact ratings 30 Vdc / 1 A
65 Vdc / 0.46 A
150 Vac / 0.46 A
Max. DC Load Breaking Capacity
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 8 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Insulation
Insulation resistance at 500 Vdc > 109
Dielectric test voltage (1 min)
between coil and contacts (Relay with 1 coil)
between open contacts
1500 Vrms
500 Vrms
Surge voltage resistance
according to Bellcore TR-NWT-001089 (2 / 10 µs)
between coil and contacts (Relay with 1 coil)
between open contacts
according to FCC 68 (10 / 160 µs)
between coil and contacts (Relay with 1 coil)
between open contacts
2500 V
on request 2000 V
1500 V
on request 1500 V
Insulation according to IEC / EN 60950
Clearance
Creepage distance
Basic insulation
0.75 mm
0.75 mm
High Frequency Data
Capacitance
between coil and contacts
between open contacts
max. 6 pF
max. 5 pF
RF Characteristics
Isolation at 100 / 900 MHz
Insertion loss at 100 / 900 MHz
V.S.W.R. at 100 / 900 MHz
- 30.0 dB / - 18.0 dB
- 0.12 dB / - 1.9 dB
1.06 / 1.75
General Data
Operate time at Unom typ. / max. 1 ms / 2 ms
Reset time (latching) at Unom , typ. / max. 1 ms / 2 ms
Release time without diode in parallel (non-latching), typ. / max. 0.4 ms / 1 ms
Release time with diode in parallel (non-latching), typ. / max. 1.2 ms / 2 ms
Bounce time at closing contact, typ. / max. 1 ms / 3 ms
Maximum switching rate without load 200 operations/s
Ambient temperature -40 °C ... +70 °C, +85 °C on request
Thermal resistance < 130 K/W
Maximum permissible coil temperature 85 °C
Vibration resistance (function) 20 G, 200 to 2000 Hz
40 G, 10 to 200 Hz
Shock resistance, half sinus, 11 ms 50 G (function)
Degree of protection / Environmental protection immersion cleanable, IP 67 / RT III
Needle flame test application time 20 s, no burning < 15s
Mounting position any
Processing information Ultrasonic cleaning possible
Weight (mass) max. 2 g
Terminal surface SnCu 0.7
Moisture sensitive level (JEDEC J-STD-020B) - SMD types MSL 3
Resistance to soldering heat 265 °C / 10 s
All data refers to 23 °C unless otherwise specified.
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 9 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Soldering conditions according IEC 60058-2-58 and
IPC/JEDEC J-STD-020B
Infrared Soldering: Temperature/Time Prole
(Lead and Housing Peak Temperature)
Infrared Soldering: Temperature/Time Prole
(Lead and Housing Peak Temperature)
Recommended Soldering Conditions
Resistance to soldering heat - Reflow profile
Recommended reflow soldering profile
Vapor Phase Soldering: Temperature/Time Prole
(Lead and Housing Peak Temperature)
240 °C
180 °C
130 °C
100 °C
20 - 40 sec Full line: typical
Dotted line: process limits
forced
cooling
Temperature °C
Temperature °C
Time (s)
Temperature °C
Time (s)
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 10 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Packing Dimensions in mm
11.6±0.2
13.8±0.2
Tube for THT version
40 relays per tube
2‘000 relays per box
Tape and reel for SMT version
480 relays per reel
2‘400 per box
Reel dimension
108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 11 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
IM Relays
4th generation slim line – low prole polarized 2 c/o telecom signal relay
with bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ...
200 mW, latching relays with 1 coil 100 mW. The IM relay is available as
through hole and surface mount type (J-Legs and Gull Wings) and capable
to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G
relay on the market. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV 2 / 10 µs) and FCC part 68 (1,5 kV 10 / 160 µs).
The IM relay is tested according CECC/IECQ and certied in accordance
with IEC/EN 60950 and UL 60950.
Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. The P2 Relay is available as through hole or surface
mount type and capable to switch currents up to 5 A. Dielectric strength
fullls the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs)
and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according
CECC/IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FX2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high
sensitive version, 140... 300 mW for the standard version, latching relays
with 1 coil 100 mW. The FX2 relay is available as through hole type and
capable to switch loads up to 60 W/62,5 VA. Dielectric strength fullls the
Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/
IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with bifurca-
ted contacts. Nominal voltage range from 3 ... 48 V, coil power consumption
200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and
surface mount type. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV 2 / 10 µs) and FCC part 68 (1,5 kV 10 /
160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certied
in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching
relays with 1 coil 100 mW.. The FP2 Relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength
fullls FCC part 68 (1,5 kV 10 / 160 µs). The FP2 is tested according
CECC/IECQ approved.
Dimensions approx. 14 x 9 mm board space and 5 mm height.
MT2
2nd generation non polarized, non latching 2 c/o telecom and si-
gnal relay with bifurcated contacts. Nominal voltage range from 3
... 48 V, coil power consumption 150/200/300/400 and 550 mW.
Dielectric strength fulfills the requirements according FCC part 68
(1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x 10 mm board space and 11 mm height.
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other ap-
plications. Nominal voltage range from 3 ... 48 V, coil power consumption from
150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric
strength fullls the requirements according FCC part 68 (1,5 kV 10 / 160 µs).
Dimensions approx. 20 x10 mm board space and 11 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay with
1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption
65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as
through hole or surface mount type and capable to switch currents up to 1
A. Dielectric strength fullls the requirements according FCC part 68 (1,5
kV 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7
mm height for THT or 8 mm height for SMT version.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive
versions 200 mW. The W11 relay is capable to switch currents up to 3 A.
Dielectric strength 1000 Vrms.
Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other applica-
tions, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range
from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ...
280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or
SIL housing and capable to switch currents up to 0,5 A. Integrated diode
and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimen-
sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or
19,8 x 5 mm board space and 7,8 mm height for SIL version.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various signal
switching applications. Available as non polarized, polarized / latching and
relay with AC coil. The benet is the possibility of combining various contact
sets from 1 up to 6 poles, single and bifurcated contacts, different contact
materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are
available as dust protected and hermetically sealed versions, with plug in or
solder terminals and are capable to switch currents up to 5 A. Forcibly guided
(linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from
approx. 19 x 24 to 19x35 mm board space and 30 mm height.
Other Relays
We offer a variety of different relay families for maintenance and replace-
ment purposes. These relays are up to 60 years old now, such as Card
Relay SN (V23030 series), Small General Purpose Relay (V23006 series),
Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series).
Accessories like sockets, hold down springs, etc. optional.
High Frequency Relays
HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics
in a small package. All HF series relays are suitable for SMD soldering
processes. Available as non latching or latching versions with 1 or 2 coils
and a nominal coil voltage range from 3 … 24 V, a coil power consumption
of 140 mW or 70 mW (single coil latching types).
HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm.
50 W hot switching and 50 W RF power carry capability.
Dimensions 14.6 x 7.3 x 10.3 mm.
HF3S: High performance, high power RF relay suitable up to 3 GHz,
50 W hot switching and 150 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
HF6: High performance, high power RF relay suitable up to 6 GHz,
50 W hot switching and 50 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
Telecom-, Signal and RF Relays
AXICOM
Tyco Electronics Logistics AG
Werk Axicom Au
Seestrasse 295
CH-8804 Au-Wädenswil / Switzerland
Phone +41 44 782 91 11
Fax +41 44 782 90 00
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax +49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752