IEC Inlet Filters FN 9222 General Performance IEC Inlet Filter Rated currents up to 20A Excellent performance/size ratio Approvals Complies with IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) Optional overvoltage protection (Z type) Technical specifications Approvals by rated current: 1 to 10A (ENEC, CQC) 16A (ENEC, CQC) for 16 and 20A types 1 to 20A (UL, CSA) Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 (X to XX A, not Z types) Flammability corresponding to: UL 94V-2 or better High potential test voltage: P -> PE 2000VAC for 2 sec (standard types) P -> PE 2500VAC for 2 sec (B types) P -> N 1000VAC for 2 sec (1 to 10A types, not Z types) P -> N 250VAC for 2 sec (all Z types) P -> N 1100VDC for 2 sec (16 and 20A types, not Z types) Maximum continuous operating voltage: 250VAC, 50/60Hz MTBF @ 40C/230V (Mil-HB-217F): 15A: 3,040,000 hours 16A: 2,256,000 hours Operating frequency: dc to 400Hz Protection category: IP40 according to IEC 60529 Rated currents: 1 to 20 A @ 50C Surge pulse protection (optional): 2kV, IEC 61000-4-5 Temperature range (operation and -25C to +85C (25/85/21) storage): The FN 9222 IEC inlet filter combines an IEC inlet and mains filter with excellent filter attenuation in a small form factor. Choosing the FN 9222 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution. Features and benefits Exceptional conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior. Rear/front or snap-in mounting. (CQC except HI-types) Typical electrical schematic Typical applications Portable electrical and electronic equipment Small to medium-sized machines and household equipment Wide mounting flanges available. Single-phase power supplies, switchmode power supplies comply with the requirements of IEC/EN Medical equipment Optional medical versions (B type) 60601-1 for creepage and clearance, leakage current and high potential testing. 12 and 15A types with hot inlet available. Optional surge pulse protection. Different output connections offering maximum flexibility for assembly. Custom-specific versions are available on request. Test and measurement equipment Rack mounting equipment IEC Inlet Filters > FN 9222 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections @ 50C (25C) @ 250VAC/50Hz L Cx Cy R FN FN FN FN FN FN FN FN FN 9222x-1-.. 9222x-3-.. 9222x-6-.. 9222x-8-.. 9222x-10-.. 9222x-12-.. 9222x-15-.. 9222x-12-..HI 9222x-15-..HI [A] 1 (1.2) 3 (3.5) 6 (7.2) 8 (10.6) 10 (11.6) 12 (12) 15 (15) 12 (12) 15 (15) [A] 373 373 373 373 373 373 373 373 373 [mH] 12 2.5 0.78 0.5 0.225 0.11 0.075 0.11 0.075 [F] 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 [nF] 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 [k] FN FN FN FN FN FN FN FN FN FN FN 9222xR-1-.. 9222xR-3-.. 9222xR-6-.. 9222xR-8-.. 9222xR-10-.. 9222xR-12-.. 9222xR-15-.. 9222xR-16-06 9222xR-20-06 9222xR-12-..HI 9222xR-15-..HI 1 (1.2) 3 (3.5) 6 (7.2) 8 (10.6) 10 (11.6) 12 (12) 15 (15) 16 (18.5) 20 (23) 12 (12) 15 (15) 373 373 373 373 373 373 373 373 373 373 373 12 2.5 0.78 0.5 0.225 0.11 0.075 0.54 0.4 0.11 0.075 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.33 0.33 0.1 0.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 FN FN FN FN FN FN FN FN FN FN FN 9222xB-1-.. 9222xB-3-.. 9222xB-6-.. 9222xB-8-.. 9222xB-10-.. 9222xB-12-.. 9222xB-15-.. 9222xB-16-06 9222xB-20-06 9222xB-12-..HI 9222xB-15-..HI 1 (1.2) 3 (3.5) 6 (7.2) 8 (10.6) 10 (11.6) 12 (12) 15 (15) 16 (18.5) 20 (23) 12 (12) 15 (15) 2 2 2 2 2 2 2 2 2 2 2 12 2.5 0.78 0.5 0.225 0.11 0.075 0.54 0.4 0.11 0.075 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.33 0.33 0.1 0.1 FN FN FN FN FN FN FN 9222UZ-1-06 9222UZ-3-06 9222UZ-6-06 9222UZ-8-06 9222UZ-10-06 9222UZ-12-06 9222UZ-15-06 1 (1.2) 3 (3.5) 6 (7.2) 8 (10.6) 10 (11.6) 12 (12) 15 (15) 373 373 373 373 373 373 373 12 2.5 0.78 0.5 0.225 0.11 0.075 0.1 0.1 0.1 0.1 0.1 0.1 0.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 -06 -06 -06 -06 -06 -06 -06 -06 -06 -07 -07 -07 -07 -07 -07 -07 -07 -07 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -07 -07 -07 -07 -07 -07 -07 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -07 -07 -07 -07 -07 -07 -07 -06 -06 -06 -06 -06 -06 -06 * Maximum leakage under normal operating c onditions. Note: if the neutral line is interrupted, worst c ase leakage c ould reac h twic e this level. -07 -07 -07 -07 Weight [g] 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 100 100 40 40 40 40 40 40 40 40 40 100 100 40 40 43 43 43 43 43 43 43 IEC Inlet Filters > FN 9222 Product selector For example: FN 9222E-15-06, FN 9222ES 1B-10-06-20, FN 9222ER-12-06HI, FN 9222EUB-8-06-20 Typical filter attenuation Per CISPR 17; A = 50/50 sym; B = 50/50 asym; C = 0.1/100 sym; D = 100/0.1 sym 1 and 3A types 6 to 10A types 12 and 15A types 16 and 20A types IEC Inlet Filters > FN 9222 Mechanical data FN 9222 1 to 15A types FN 9222, 16 and 20A types FN 9222S FN 9222S1 FN 9222-HI FN 9222U -07 connection style Panel cut out Installation IEC Inlet Filters > FN 9222 Dimensions A B C D E F G H I J M N P R S T* T* X Y Z FN 9222 1 to 8A 10 to 15A 16 and 20A 48 22.5 40 0.2 38.4 27.8 5.5 20.1 O3.3 14 13.3 R3 21.5 28.5 M3 90 48 22.5 40 0.2 38.4 27.8 5.5 20.1 O3.3 14 13.3 R3 21.5 28.5 M3 90 53 30 42 0.2 66 34 4 26.5 O3.5 14 13.3 R3 27 34.7 M3 90 AWG 18 160 6 AWG 16 160 6 FN 9222U FN 9222UZ FN 9222S 1 to 8A 10 to 15A FN 9222S1 1 to 8A 10 to 15A 51.85 25 40 0.2 38.25 27.8 5.5 20.1 O3.3 14.1 13.3 R3 21.5 28.5 M3 90 51.85 25 40 0.2 46.8 27.8 5.5 20.1 O3.3 14 13.3 R3 21.5 28.5 M3 90 29.9 22.4 29.9 22.4 29.9 22.4 29.9 22.4 38.4 27.8 5.5 20.1 38.4 27.8 5.5 20.1 38.4 27.8 5.5 20.1 38.4 27.8 5.5 20.1 14 13.3 R 1.5 20.8 29.4 14 13.3 R 1.5 20.8 29.4 14 13.3 R 1.5 21.9 28.5 14 13.3 R 1.5 21.9 28.5 0.7 - 1.5 1.5 - 2.2 AWG 18 160 6 0.7 - 1.5 1.5 - 2.2 AWG 16 160 6 0.7 - 1.5 1.5 - 2.2 AWG 18 160 6 0.7 - 1.5 1.5 - 2.2 AWG 16 160 6 * For selec ting the panel thic kness, please refer to the filter selec tor table. All dimensions in mm; 1 inc h = 25.4mm Toleranc es ac c ording: IS O 2768-m / EN 22768-m Your local partner: To find your local partner within Schaffner's global network, please go to www.schaffner.com FN 9222-HI 12 and 15A 48 22.5 40 0.2 38.4 27.8 5.5 20.1 O3.3 14 13.3 R3 21.5 28.5 M3 90 AWG 16 160 6 Headquarters, global innovation and development center Schaffner Group Nordstrasse 11 4542 Luterbach Switzerland T +41 32 681 66 26 F +41 32 681 66 30 info@schaffner.com www.schaffner.com To find your local partner within Schaffner`s global network, pleas e go to: www.s chaffner.com (c) 2014 Schaffner Group The content of this document has been carefully checked and unders tood. However, neither Schaffner nor its s ubs idiaries as s ume any liability whats oever for any errors or inaccuracies of this document and the cons equences thereof. Publis hed s pecifications are s ubject to change without notice. Product s uitability for any area of application mus t ultimately be determined by the cus tomer. In all cas es , products mus t never be operated outs ide their publis hed s pecifications . Schaffner does not guarantee the availability of all publis hed products . This dis claimer s hall be governed by s ubs tantive Swis s law and res ulting dis putes s hall be s ettled by the courts at the place of bus ines s of Schaffner Holding AG. Lates t 01/2014 EN publications and a complete dis claimer can be downloaded from the Schaffner webs ite. All trademarks recognized. Sales and application centers China Schaffner EMC Ltd. Shanghai T20-3, No 565 Chuangye Road Pudong New Area 201201 Shanghai T +86 21 3813 9500 F F +86 21 3813 9501 / 02 cs china@s chaffner.com http://www.s chaffner.com.cn/ Spain Schaffner EMC Espana Calle Calendula 93, Miniparc III, Edificio E El Soto de la Moraleja Alcobendas 28109 Madrid T +34 618 176 133 s pains ales @s chaffner.com France Schaffner EMC S.A.S. 112, Quai de Bezons Boite pos tale 133 95103 Argenteuil T +33 1 34 34 30 60 F +33 1 39 47 02 28 frances ales @s chaffner.com Switzerland Schaffner EMV AG Nords tras s e 11 4542 Luterbach T +41 32 6816 626 F +41 32 6816 641 s ales @s chaffner.ch Japan Schaffner EMC K.K. 1-32-12, Kamiuma, Setagaya-ku 7F Mits ui-s eimei Sangenjaya Bldg. 154-0011 Tokyo T +81 3 5712 3650 F +81 3 5712 3651 japans ales @s chaffner.com http://www.s chaffner.jp Thailand Schaffner EMC Co. Ltd. Northern Region Indus trial Es tate 67 Moo 4 Tambon Ban Klang Amphur Muangg P.O. Box 14 51000 Lamphun T +66 53 58 11 04 F +66 53 58 10 19 thailands ales @s chaffner.com Finland Schaffner Oy Sauvonrinne 19 H 08500 Lohja T +358 19 35 72 71 finlands ales @s chaffner.com Italy Schaffner EMC S.r.l. Via Galileo Galilei 47 20092 Cinis ello Bals amo (MI) T +39 02 66 04 30 45/47 F +39 02 61 23 943 italys ales @s chaffner.com A Singapore Schaffner EMC Pte Ltd. Blk 3015A Ubi Road 1 05-09 Kampong Ubi Indus trial Es tate 408705 Singapore T +65 6377 3283 F +65 6377 3281 s ingapores ales @s chaffner.com Germany Schaffner Deutschland GmbH Schoemperlens tras s e 12B 76185 Karls ruhe T +49 721 56910 F +49 721 569110 germanys ales @s chaffner.com Sweden Schaffner EMC AB Turebergs torg 1, 6 19147 Sollentuna T +46 8 5792 1121 / 22 F +46 8 92 96 90 s wedens ales @s chaffner.com Taiwan R.O.C. Schaffner EMV Ltd. 6 Floor, No. 413 Rui Guang Road 114 Neihu Dis trict Taipei City T +886 2 87525050 F +886 2 87518086 taiwans ales @s chaffner.com UK Schaffner Ltd. 5 As hville Way Molly Millars Lane Wokingham RG41 2PL Berks hire T +44 118 9770070 F +44 118 9792969 uks ales @s chaffner.com http://www.s chaffner.uk.com USA Schaffner EMC Inc. 52 Mayfield Avenue 08837 Edis on T 1-800-367-5566 T 732-225-9533 F 732-225-4789 us as ales @s chaffner.com http://www.s chaffner.com/us