SURFACE MOUNT DISPLAY ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features APSC03-41PBWA-F01 BLUE Description 0.3 INCH DIGIT HEIGHT. The Blue source color devices are made with InGaN LOW CURRENT OPERATION. on SiC Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or I.C. COMPATIBLE. antielectrostatic glove when handling the LEDs. MECHANICALLY RUGGED. All devices, equipment and machinery must be GRAY FACE,WHITE SEGMENT. electrically grounded. PACKAGE : 1100PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAF2721 REV NO: V.2 DATE: APR/25/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000280-01 Selection Guide Part No. Dice APSC03-41PBWA-F01 Iv (ucd) @ 10mA Lens Type BLUE (InGaN) WHITE DIFFUSED Description Min. Typ. 1900 7400 Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Blue D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 65 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.65 4.2 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 102 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF2721 REV NO: V.2 DATE: APR/25/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000280-01 Blue APSC03-41PBWA-F01 SPEC NO: DSAF2721 REV NO: V.2 DATE: APR/25/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000280-01 APSC03-41PBWA-F01 Recommended Soldering Pattern (Units : mm) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAF2721 REV NO: V.2 DATE: APR/25/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000280-01 PACKING & LABEL SPECIFICATIONS APSC03-41PBWA-F01 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2721 REV NO: V.2 DATE: APR/25/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000280-01