PRODUCT DESCRIPTION
Static Free™ Mat & Benchtop Reconditioner is
an excellent surface cleaner specifically
engineered for use in ESD sensitive
environments. Static Free™ Mat & Benchtop
Reconditioner penetrates and lifts light
greases, oils, fingerprints and flux residues
from surfaces while providing static
dissipative protection.
Excellent for use on nonporous opaque
surfaces
Will not dry mat surfaces with repeated use
Cleans while leaving a static dissipative
surface treatment
Long-lasting dissipative protection; up to
30 days
Effective in relative humidities below 15%
Chloride and amine free formulation
Noncorrosive
Meets static decay criteria of
MIL-B-891705C
Nonflammable
Safe on surfaces not harmed by water
Nonabrasive
TYPICAL APPLICATIONS
Static Free™ Mat & Benchtop Reconditioner
cleans and adds static dissipative protection to:
Benchtops, Storage Cabinets
Production/Assembly Surfaces
Static Dissipative/Antistatic Mats
Tool Cribs
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Appearance Clear Liquid
Odor Pleasant/Clean
Specific Gravity 0.997 g/ml
(@ 77°F (25°C)
pH 6.0
Flashpoint (TCC) None to Boiling
Shelflife 2 years after opening
RoHS/WEEE
Status
COMPATIBILITY
Static Free™ Mat & Benchtop Reconditioner is
excellent for use on most surfaces not harmed
by water. As with any cleaning product,
compatibility must be determined on a non-
critical area prior to use.
AVAILABILITY
ES1664T 16 fl. oz. Trigger Spray
TDS # 1664T
CHEMTRONICS®
Technical Data Sheet
Static Free™ Mat & Benchtop Reconditioner
Material Compatibility
ABS Excellent
Buna-N Excellent
EPDM Excellent
Graphite Excellent
HDPE Excellent
Kynar™ Excellent
LDPE Excellent
Lexan™ Excellent
Neoprene Excellent
Nylon™ 66 Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Excellent
PVC Excellent
Silicone Rubber Excellent
Teflon™ Excellent
Viton™ Excellent
Static Free™ Mat & Benchtop Reconditioner
STATIC DECAY RATE IN SECONDS
7 _ Competitor #2
6 _ Competitor #1
5 _
4 _
3 _
2 _ Chemtronics
1 _
INITIAL 15 DAYS
TIME LAPSE OF TREAMENT
Atmospheric Conditioons: 12% RH
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray generously 6-12 inches from surface to
be cleaned. Allow product to penetrate soils,
then wipe clean with Chemtronics®
Controlwipes™ or Twillwipes™.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics® provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 5.0%
HCFC 0.0% HFC 0.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential (ODP)
is determined in accordance with the Montreal Protocol and
U.S. Clean Air Act of 1990. The ODP of this product is
0.0. It is the sum of the ODP of the substances that may
contribute to the depletion of stratospheric ozone, based
upon the weight of each substance in the product’s
formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate and
use the data properly. CHEMTRONICS® does not
guarantee the accuracy of the data and assumes no liability
in connection with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. E (06/06)
DISTRIBUTED BY:
