http://www.tracopower.com Page 1 of 4
DC/DC Converters
TMR 1 & TMR 1SM Series, 1 Watt
Order code
SIP-package
Order code
SMD-package Input voltage range Output voltage Output current
max.
Efficiency
SIP typ.
Efficiency
SMD typ.
TMR 1-0511 TMR 1-0511SM 5.0 VDC 200 mA 76 % 78 %
TMR 1-0512 TMR 1-0512SM 12 VDC 83 mA 77 % 79 %
TMR 1-0513 TMR 1-0513SM 4.5 – 9.0 VDC 15 VDC 67 mA 79 % 81 %
TMR 1-0515 (5 VDC nominal) 24 VDC 42 mA 76 %
TMR 1-0522 TMR 1-0522SM ±12 VDC ±42 mA 77 % 79 %
TMR 1-0523 TMR 1-0523SM ±15 VDC ±33 mA 78 % 80 %
TMR 1-1211 TMR 1-1211SM 5.0 VDC 200 mA 77 % 79 %
TMR 1-1212 TMR 1-1212SM 12 VDC 83 mA 77 % 79 %
TMR 1-1213 TMR 1-1213SM 9.0 – 18 VDC 15 VDC 67 mA 80 % 82 %
TMR 1-1215 (12 VDC nominal) 24 VDC 42 mA 77 %
TMR 1-1222 TMR 1-1222SM ±12 VDC ±42 mA 79 % 81 %
TMR 1-1223 TMR 1-1223SM ±15 VDC ±33 mA 78 % 80 %
TMR 1-2411 TMR 1-2411SM 5.0 VDC 200 mA 77 % 79 %
TMR 1-2412 TMR 1-2412SM 12 VDC 83 mA 80 % 82 %
TMR 1-2413 TMR 1-2413SM 18 – 36 VDC 15 VDC 67 mA 80 % 82 %
TMR 1-2415 (24 VDC nominal) 24 VDC 42 mA 77 %
TMR 1-2422 TMR 1-2422SM ±12 VDC ±42 mA 80 % 82 %
TMR 1-2423 TMR 1-2423SM ±15 VDC ±33 mA 80 % 82 %
TMR 1-4811 TMR 1-4811SM 5.0 VDC 200 mA 77 % 79 %
TMR 1-4812 TMR 1-4812SM 12 VDC 83 mA 78 % 80 %
TMR 1-4813 TMR 1-4813SM 36 – 75 VDC 15 VDC 67 mA 78 % 80 %
TMR 1-4815 (48 VDC nominal) 24 VDC 42 mA 76 %
TMR 1-4822 TMR 1-4822SM ±12 VDC ±42 mA 79 % 81 %
TMR 1-4823 TMR 1-4823SM ±15 VDC ±33 mA 79 % 81 %
Models
Features
Wide 2:1 input voltage range
Compact SIP-6 or SMD package
Fully regulated outputs
Cost optimised design
No minimum load required
Continuous short circuit protection
Temperature range –40°C to +85°C
I/O isolation 1500 VDC
Remote On/Off control (SMD)
3-year product warranty
The TMR-1 and TMR 1SM series are families of isolated 1 W dc-dc converter mod-
ules with regulated output, featuring wide 2:1 input voltage ranges. These products
come in a compact SIP-6 or SMD package with small footprint occupying only 1.2
cm2 (0.2 square inch) of board space.
An excellent efficiency allows –40°C to +8C operation temperature. Further fea-
tures include remote On/Off control (SMD-Version) and continuous short circuit
protection. The compact dimensions and cost optimised design make this converters
an ideal solution for applications in communication equipment, instrumentation and
industrial electronics.
C B
Scheme
UL 60950-1
http://www.tracopower.com Page 2 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TMR 1 & TMR 1SM 1 Watt
Input Specifications
Input current at no load (nominal input voltage) 5.0 V models: 40 mA typ.
12 V models: 20 mA typ.
24 V models: 10 mA typ.
48 V models: 7 mA typ.
Surge voltage (1 sec. max.) 5.0 V models: 15 V max.
12 V models: 25 V max.
24 V models: 50 V max.
48 V models: 100 V max.
Start-up voltage / under voltage lockout 5.0 V models: 4.5 VDC / 4 VDC or lower
12 V models: 9 VDC / 8.5 VDC or lower
24 V models: 18 VDC / 17 VDC or lower
48 V models: 36 VDC / 34 VDC or lower
long term operation at undervoltage will
damage the converter!
Conducted noise (input) EN 55022 level A, FCC part 15, level A with
external capacitor. see EMC consideration
Recommended input fuse (slow blow) 5 V models: 500 mA
12 V models: 250 mA
24 V models: 120 mA
48 V models: 60 mA
Output Specifications
Voltage set accuracy ±1 % max.
Regulation – Input variation Vin min. to Vin max. 0.2 % max.
– No load to full load Single & Dual output models: ±1.0 % max.
– Load variation 10 – 90% Single output models: ±0.5 % max.
Dual output models: ±0.8 % max.
Minimum load no minimum load required
Temperature coefficient 0.02 %/K
Ripple and noise (20 MHz bandwidth) SMD models: 30 mVp-p max.
SIP models: 50 mVp-p max.
Transient response setting time (25% load step change) 250 µs typ. (PFM)
Transient response deviation ±5 % max.
Current limitation >120 % of Iout max.
Over load protection (Foldback) 130 %
Short circuit protection continuous, automatic recovery
Capacitive load 5 VDC models: 1680 µF max.
12 VDC models: 820 µF max.
15 VDC models: 680 µF max.
24 VDC models: 470 µF max.
±12 VDC models: 470 µF max. (each output)
±15 VDC models: 330 µF max. (each output)
General Specifications
Temperature ranges – Operating SIP models: –40°C to +85°C with no derating
SMD models: 40°C to +82°C with derating
– Case temperature +105°C (SIP) / +9C (SMD) max.
– Storage –55°C to +125°C
Load derating SMD models: 7.2 %/K above +75°C
Humidity (non condensing) 95 % rel. H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2.8 Mio h
Page 3 of 4
DC/DC Converters
TMR 1 & TMR 1SM 1 Watt
General Specifications
Isolation voltage (60 sec.) Input/Output 1500 VDC
Isolation capacitance Input/Output 50 pF max.
Isolation resistance Input/Output (500 VDC) >1 GOhm
Switching frequency 220 kHz (PFM)
Safety standards CAN/CSA-C22.2 No 60950-1-07 Incl. AM1 (2011)
ANSI/UL Std No 60950-1, 2nd Ed. Incl. AM1 (2011)
IEC 60950-1:2005 (2nd Edition); +A1:2009
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
– Certification documents www.tracopower.com/overview/tmr1
Remote On/Off On: < 0.6 VDC or open circuit
(SMD models only) Off: 2.7 to 15 VDC (ref. to –Vin)
Off standby current: 2.5 mA max.
Off control input current: 1 mA max.
Physical Specifications
Casing material non-conductive plastic (UL94V-0 rated)
Potting material (for SIP-package models) epox y, (UL 94V-0 rated)
Weight 3.1 g ( 0.11o z ) (SIP)/3.3 g ( 0.12oz) (SMD)
Soldering profile for SIP-package models max. 26C / 10 sec. (wave soldering)
Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Washing Process (for SMD-package) not recommended. Product non-hermetical.
Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
Environmental compliance – Reach www.tracopower.com/overview/tmr1
– RoHS RoHS directive 2011/65/EU
EMC Consideration
+Vin
-Vin
+Vout
-Vout
C1
C2
L1
Load
+Vin
-Vin
+Vout
-Vout
C1
C2
L1
Load
Com.
Load
Single output models
Input models C1 C2 L1
5 VDC 4.7µF /50V, 1210 X7R 4.7µH / 1.2 A, SR0302
12 VDC 4.7µF /50V, 1210 X7R 4.7µH / 1.2 A, SR0302
24 VDC SIP 4.7µF /50V, 1210 X7R 18µH / 0.58 A, SR0302
24 VDC SMD 4.7µF /50V, 1210 X7R 220pF /2 kV, 1808 X7R 12µH / 0.75 A, SR0302
48 VDC SIP 4.7µF /100V 1210 X7R 18µH / 0.58A, SR0302
48 VDC SMD 2.2µF / 00V 1210 X7R 18µH / 0.58A, SR0302
Dual output models
Filter suggestion for to comply with EN55022 class A conducted noise emission
Outline Dimensions mm (inches)
Page 4 of 4
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. March 21. 2016
DC/DC Converters
TMR 1 & TMR 1SM 1 Watt
Pin single output dual output
1–Vin (GND) –Vin (GND)
2+Vin (Vcc) +Vin (Vcc)
4+Vout +Vout
5No Pin Common
6–Vout –Vout
Pinout
Bottom view
1 2 65
2.5
2.54
0.5
2.3
±0.4
2.54
17.0
(0.67)
5.08
(0.2)
2.54
0.5
(0.02)
11.0
(0.4)
3.2
(0.13)
(0.02)
0.5
(0.02)
(0.1) (0.1) (0.1)
(0.09
±0.02
)
7.62
(0.30)
(0.10)
(0.02)
4
0.5
0.25
(0.01)
Dimensions in [mm], () = Inch
Tolerances: ±0.5 (±0.02)
Pin pitch tolerances: ±0.25 (±0.01)
SIP-Package
SMD-Package
17
6
14 89
2
13.7 [0.54]
17.2 [0.68]
8.45 [0.33]
8.7 [0.34]
0.25 [0.01]
1.00 [0.04]
18.9 [0.74]
12.7 [0.5]
[0.1]
2.54
1.8 [0.1]
Top View
0~4
S
SEATING
PLANE
0.15 S
1.1 [0.04] 15.0 [0.6]
4.0 [0.16]
5.5 [0.22]
Ø
1.5 [
Ø
0.06]vent hole on bottom side
(for reflow soldering process)
Pin single output dual output
1–Vin (GND) –Vin (GND)
2Remote On/Off Remote On/Off
6ntc Common
7ntc –Vout
8+Vout +Vout
9–Vout Common
14 +Vin +Vin
Pinout
ntc = not to connect to electrical circuit
13.7 [0.54]
18.6
[0.73]
1.6 [0.06]
15.24
[0.6]
16.15
[0.64]
2.54 [0.1]
2.4
[0.1]
Solder Pad Dimensions
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TRACO Power:
TMR 1-1211SM TMR 1-0522SM TMR 1-0512SM TMR 1-0513SM TMR 1-2413SM TMR 1-2412SM TMR 1-
4811SM TMR 1-4812SM TMR 1-4813SM TMR 1-2422SM TMR 1-1222SM TMR 1-4823SM TMR 1-1223SM TMR
1-2411SM TMR 1-0523SM TMR 1-4822SM TMR 1-0511SM TMR 1-1212SM TMR 1-2423SM TMR 1-1213SM