T93YA200R - VISHAY - Datasheet.Live

RCWE

www.vishay.com Vishay Dale

Revision: 07-Oct-15 1Document Number: 20019

For technical questions, contact: ff2cresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Thick Film Surface Mount Chip Resistors,

Wraparound, Extremely Low Value (0.01  to 0.976 )

FEATURES

• Extremely low resistance values 

(0.01  to 0.976 )

• Enhanced power rating due to long side terminal

construction (0612, 1020 types)

• Suitable for current sensing and shunts

• Metal glaze on high quality ceramic

• Protective overglaze

• Lead (Pb)-free solder contacts on Ni barrier layer

• AEC-Q200 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Notes

• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.

• Part marking: Reference “Surface Mount Resistor Marking” (www.vishay.com/doc?20020).

(1) Tight tolerance of 0.5 % is available for resistance values above 0.200 .

(2) Use E24 decade values for 5.0 % tolerance parts and E96 decade values for 0.5 % and 1.0 %. Refer to Standard Decade Table

(www.vishay.com/doc?31001).

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL 

MODEL CASE SIZE

POWER RATING

P70 °C

TEMPERATURE

COEFFICIENT

± ppm/°C

RESISTANCE

RANGE



TOLERANCE

± % E-SERIES (2)

RCWE0402 0402 0.125

400 0.033 to 0.05 5.0 24

200 0.051 to 0.18 1.0, 5.0 24; 96

100 0.2 to 0.976 0.5, 1.0, 5.0 (1)

RCWE0603 0603 0.2

700 0.010 to 0.018 5.0 24

400 0.02 to 0.03 1.0, 5.0

24; 96200 0.033 to 0.105 1.0, 5.0

100 0.11 to 0.976 0.5, 1.0, 5.0 (1)

RCWE0805 0805 0.25

400 0.010 to 0.018 5.0 24

300 0.02 to 0.03 1.0, 5.0

24; 96200 0.033 to 0.05 1.0, 5.0

100 0.051 to 0.976 0.5, 1.0, 5.0 (1)

RCWE0612 0612 1.0

300 0.010 to 0.016 2.0, 5.0 24

200 0.018 to 0.2 2.0, 5.0

100 0.205 to 0.976 1.0, 5.0 24; 96

RCWE1206 1206 0.5

600 0.010 to 0.018 5.0 24

300 0.02 to 0.03 1.0, 5.0

24; 96200 0.033 to 0.05 1.0, 5.0

100 0.051 to 0.976 0.5, 1.0, 5.0 (1)

RCWE1210 1210 1.0

500 0.010 to 0.018 5.0 24

300 0.02 to 0.03 1.0, 5.0

24; 96200 0.033 to 0.05 1.0, 5.0

100 0.051 to 0.976 0.5, 1.0, 5.0 (1)

RCWE1020 1020 2.0 200 0.010 to 0.016 2.0, 5.0 24

100 0.0162 to 0.976 1.0, 5.0 24; 96

RCWE2010 2010 1.0

600 0.010 to 0.018 5.0 24

300 0.02 to 0.03 1.0, 5.0

24; 96200 0.033 to 0.05 1.0, 5.0

100 0.051 to 0.976 0.5, 1.0, 5.0 (1)

RCWE2512 2512 2.0

600 0.010 to 0.018 5.0 24

300 0.02 to 0.03 1.0, 5.0

24; 96200 0.033 to 0.05 1.0, 5.0

100 0.051 to 0.976 0.5, 1.0, 5.0 (1)

RCWE

www.vishay.com Vishay Dale

Revision: 07-Oct-15 2Document Number: 20019

For technical questions, contact: ff2cresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: RCWE060351L0FNEA (visit www.vishay.net Vishay Dale parts numbering manual for all options)

GLOBAL MODEL

(8 digits)

VALUE

(4 digits)

TOLERANCE

(1 digit)

TCR

(1 digit)

PACKAGING

(2 digits)

RCWE0402

RCWE0603

RCWE0805

RCWE0612

RCWE1206

RCWE1210

RCWE1020

RCWE2010

RCWE2512

L = m *

R = decimal

10L0 = 0.01 

R470 = 0.47 

Note:

* Use “

” for resistance

values < 0.1



D = ± 0.5 %

F = ± 1.0 %

G = ± 2.0 %

J = ± 5.0 %

K = ± 100 ppm/°C

N = ± 200 ppm/°C

M = ± 300 ppm/°C

Q = ± 400 ppm/°C

P = ± 500 ppm/°C

T = ± 600 ppm/°C

G = ± 700 ppm/°C

EA = lead (Pb)-free,

tape/reel

TECHNICAL SPECIFICATIONS

PARAMETER UNIT RCWE0402 RCWE0603 RCWE0805 RCWE0612 RCWE1206 RCWE1210 RCWE1020 RCWE2010 RCWE2512

Operating temp.

range °C -55 to +155

Maximum operating

voltage V(P x R)1/2

Insulation voltage

Uins (1 min) V > 75 > 100 > 200 > 100 > 300 > 300 > 300 > 300 > 300

Insulation resistance > 109

Weight/1000 pieces

(typical) g 0.7 3 5.5 11.5 10.5 17.5 27.5 26 40.5

DIMENSIONS

RCWE0402 to RCWE2512 RCWE0612, RCWE1020

MODEL

DIMENSIONS in millimeters SOLDER PAD DIMENSIONS in millimeters

RESISTANCE

RANGE



LWHT1T2 a b l

RCWE0402 0.033 to 0.976 1.05 ± 0.05 0.55 ± 0.05 0.35 ± 0.1 0.3 ± 0.15 0.25 ± 0.1 0.7 0.7 0.3

RCWE0603 0.01 to 0.03 1.6 ± 0.1 0.85 ± 0.1 0.5 ± 0.1 0.5 ± 0.2 0.3 ± 0.2 0.9 1.0 0.4

0.033 to 0.976 0.3 ± 0.2 0.7 1.0 0.8

RCWE0805 0.01 to 0.03 2.0 ± 0.15 1.3 ± 0.1 0.55 ± 0.1 0.6 ± 0.2 0.35 ± 0.2 1.0 1.4 0.6

0.033 to 0.976 0.4 ± 0.2 0.8 1.4 1.0

RCWE0612 0.01 to 0.976 1.6 ± 0.2 3.2 ± 0.2 0.6 ± 0.1 0.4 ± 0.15 0.25 ± 0.15 0.9 3.5 0.8

RCWE1206

0.01 to 0.03

3.1 ± 0.15 1.6 ± 0.15 0.6 ± 0.1

0.9 ± 0.2

0.45 ± 0.2

1.3 1.8 1.0

0.033 to 0.05 0.8 ± 0.2 1.2 1.8 1.2

0.051 to 0.976 0.45 ± 0.2 1.0 1.8 1.6

RCWE1210 0.01 to 0.03 3.1 ± 0.2 2.5 ± 0.2 0.6 ± 0.1 0.8 ± 0.2 0.4 ± 0.2 1.3 2.6 1.1

0.033 to 0.976 0.4 ± 0.2 0.9 2.6 2.0

RCWE1020 0.01 to 0.976 2.5 ± 0.2 5.0 ± 0.2 0.6 ± 0.1 0.55 ± 0.15 0.30 ± 0.15 1.2 5.5 1.4

RCWE2010

0.01 to 0.03

5.0 ± 0.2 2.5 ± 0.15 0.6 ± 0.1

1.6 ± 0.3

0.6 ± 0.2

2.3 3.0 1.4

0.033 to 0.05 0.7 ± 0.3 1.4 3.0 3.2

0.051 to 0.976 0.7 ± 0.3 1.4 3.0 3.2

RCWE2512

0.01 to 0.03

6.3 ± 0.2 3.15 ± 0.15 0.6 ± 0.1

2.0 ± 0.3

0.6 ± 0.2

2.8 3.6 1.4

0.033 to 0.05 0.8 ± 0.3 1.6 3.6 3.8

0.051 to 0.976 0.8 ± 0.3 1.6 3.6 3.8

WE 0 6 3 5 10RC N0 FEL A

RCWE

www.vishay.com Vishay Dale

Revision: 07-Oct-15 3Document Number: 20019

For technical questions, contact: ff2cresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DERATING

Note

• Embossed carrier tape per EIA-481-1A.

PERFORMANCE

TEST CONDITIONS OF TEST TEST LIMITS

Thermal shock MIL-STD-202, method 107, -55 °C to +125 °C, 300 cycles at each extreme ± (1.0 % + 0.0005 ) R

Short time overload 2 x rated power; duration according the model ± (0.5 % + 0.0005 ) R

High temperature exposure MIL-STD-202, method 108, 1000 h at T = 125 °C, 0 % power ± (2.0 % + 0.0005 ) R

Temperature cycling JESD 22, method JA-104, 1000 cycles (-55 °C to +125 °C) ± (2.0 % + 0.0005 ) R

Biased humidity MIL-STD-202, method 103, 1000 h 85 °C/85 % RH, 10 % x (P x R)1/2 ± (2.0 % + 0.0005 ) R

Mechanical shock MIL-STD-202, method 213, condition C, 10 g’s, 6 ms (half sine), 3 directions ± (1.0 % + 0.0005 ) R

Vibration MIL-STD-202, method 204, 5 g’s, 20 min, 12 cycles, 3 directions, 10 Hz to 2000 Hz ± (1.0 % + 0.0005 ) R

Operational life MIL-STD-202, method 108, 1000 h at T = 125 °C at rated power ± (2.0 % + 0.0005 ) R

Resistance to solder heat MIL-STD-202, method 210, +260 °C solder, 10 s to 12 s dwell, 25 mm/s

emergence ± (1.0 % + 0.0005 ) R

Moisture resistance MIL-STD-202, method 106, 0 % power, 7a and 7b not required ± (2.0 % + 0.0005 ) R

PACKAGING

MODEL REEL

TAPE WIDTH DIAMETER PITCH PIECES/REEL CODE

RCWE0402 8 mm/punched paper 180 mm/7" 2 mm 10 000 EA

RCWE0603 8 mm/punched paper 180 mm/7" 4 mm 5000 EA

RCWE0805 8 mm/punched paper 180 mm/7" 4 mm 5000 EA

RCWE0612 8 mm/punched paper 180 mm/7" 4 mm 5000 EA

RCWE1206 8 mm/punched paper 180 mm/7" 4 mm 5000 EA

RCWE1210 8 mm/punched paper 180 mm/7" 4 mm 5000 EA

RCWE1020 12 mm/embossed plastic 180 mm/7" 4 mm 4000 EA

RCWE2010 12 mm/embossed plastic 180 mm/7" 4 mm 4000 EA

RCWE2512 12 mm/embossed plastic 180 mm/7" 8 mm 2000 EA

120

100

- 55 175

Ambient Temperature in °C

Rated Power in %

- 25 0 25 75 100 125 155

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 13-Jun-16 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.