FIXED THIN FILM CHIP RESISTORS; RECTANGULAR TYPE KAMAYA OHM RNC *Features 1. Suitable for high precision, higher stability and reliability applications compared to thick-film chip resistors. 2. Contribute to the reduction of fine adjustment, high accuracy and stability of circuit. 3. Please contact KAMAYA for Halogen and Antimony free product of RNC series. 4. Stability Class : 1% *Dimensions W L c d d Rated resistance value is maked with 3-digit (E24) or 4-digit (E96) on the over coating. H c Unit : mm Metric 2012 3216 Style RNC20 RNC32 Inch 0805 1206 L 2.00.15 3.10.1 W 1.25 0.10 0.05 1.55 0.10 0.05 H 0.60.1 0.60.1 c 0.4 0.2 0.450.20 d 0.3 0.2 0.1 0.3 0.2 0.1 *Unit weight/pc. 5mg 9mg *Values for reference Number Description *Part Example Style RNC 32 Product Type 1002 B Temperature Coefficient of Resistance E 25x10-6/C Size Code Metric Inch 20 2012 0805 32 3216 1206 6 E Tolerance on Rated Resistance B 0.1% C 0.25% D 0.5% TP * Packaging & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. TP Paper Tape 5,000pcs. *Refer to Tape and Packaging information on pages 54 and 55. Rated Resistance E24 Series e.g. : 103=10k ohm 3-Digit E96 Series e.g. : 10R2=10.2 ohm 4-Digit 1002=10k ohm Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS KAMAYA OHM FIXED THIN FILM CHIP RESISTORS; RECTANGULAR TYPE *Ratings Style Size Metric (Inch) RNC20 2012 (0805) Rated Dissipation Rated Resistance Tolerance on Temperature Coefficient Limiting Element at 70C of Resistance Voltage Range Rated Resistance W 10-6/C V 100130k RNC32 0.1 10130k 100180k 3216 (1206) 0.125 10180k RNC Preferred Number Series for Resistors Isolation Voltage V Category Temperature Range C E96 E24 100 55125 B (0.1%) C (0.25%) D (0.5%) B (0.1%) 75 25 150 C (0.25%) D (0.5%) Note1. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. *Derating Curve *Climatic Category Percentage of the rated dissipation(%) The derated values of dissipation for temperatures in excess of 70C shall be indicated by the following Curve. 55/125/56 Lower Category Temperature -55C Upper Category Temperature +125C Duration of the Damp heat, Steady-State Test 56 days 100 Area of recommended operation 0 -55 70 125 Ambient Temperature (C) *Performance Characteristics Description JIS C 5201-1 : 1998 Requirements Test Methods Voltage proof No breakdown or flashover R1G ohm Clause 4.7 100Va.c.,60s Variation of resistance with temperature See Ratings Table Clause 4.8 Measuring temperature : +20C/+125C/+20C Overload R(0.25%+0.05 ohm) No visible damage, legible marking Clause 4.13 The applied voltage shall be 2.5 times of the rated voltage or twice of the limiting element voltage, whichever is the less severe, 2s. Solderability In accordance with Clause 4.17.4.5 Clause 4.17 235C, 2s Resistance to soldering heat R(0.25%+0.05 ohm) Clause 4.18 After immersion into the flux, the immersion into solder shall be carried out in Solder bath at 260C for 5s. Rapid change of temperature R(0.25%+0.05 ohm) No visible damage Clause 4.19 5 cycles between -55C and +125C. Climatic sequence R(1%+0.05 ohm) No visible damage Clause 4.23 Dry/Damp heat(12+12h cycle), first cycle./ Cold/Damp heat(12+12h cycle), remaining cycle./ D.C.Load. Damp test, steady state R(1%+0.05 ohm) No visible damage, legible marking Clause 4.24 40C, 95%R.H., 56 days, test a) and b) of Clause 4.24.2.1 Endurance at 70C R(1%+0.05 ohm) No visible damage, legible marking Clause 4.25.1 Rated voltage, 1.5h"ON", 0.5h"OFF", 70C, 1,000h. Endurance at the upper R(1%+0.05 ohm) No visible damage category temperature Clause 4.25.3 125C, no-load, 1,000h. Adhesion No visible damage Clause 4.32 5N, 10s Bend strength of the face plating R(0.25%+0.05 ohm) Clause 4.33 Amount of bend : 3 mm Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 7