Tyco/Alcoswitch Pushbutton and Slide Switches, and Oil Tight Controls Pushbutton Switch MPA/MPE/MPG Series Molded-in heat terminals eliminate switch mechanism contamination. Gold flash contacts and terminals inhibit oxidation and extend shelf life. Diallyl phthalate cases permit these switches to withstand wide temperature ranges. Each switch has one-piece bushing to reduce the possibility of tear-off damage when mounting. All hardware is supplied unmounted. Contact Rating: 6 amps at 125 VAC; 3 amps at 250 VAC; 4 amps at 28 VDC. Solid silver contacts. Operating Force: 2.5 to 4.4 lbs. Plunger Travel: 125" avg. Insulation Resistance: 1000 ohms. Dielectric Strength: 1500 V RMS at sea level. Life Expectancy: 50 K operations. Terminal seal included at no extra charge. Order cap separately. Dimensions N In. Stock No. Mfr.Os Type Fig. Description 758-0144 758-0146 758-0148 758-0122 758-0124 758-0126 758-0130 758-0132 758-0134 758-0138 758-0140 758-0142 758-0184 758-0186 758-0188 758-0190 MPA103C MPA103D MPA103F MPA106F* MPA206R* MPA206N* MPE106D* MPE106F* MPE206R* MPG106D MPG106F MPG206R C220-AG C222-AG C230-AG C232-AG 1 1 1 2 2 2 2 2 2 2 2 2 N N N N SPST: Wire Lug Normally Open - Black Cap SPDT: Push-On/Push-Off (Tactile) - Black Cap SPDT Momentary (Tactile) - Black Cap SPDT: Wire Lug Momentary DPDT: Wire Lug Momentary DPDT: Wire Lug Push-On/Push-Off SPDT: Wire Lug Push-On/Push-Off Splashproof Splashproof DPDT: Wire Lug Momentary Splashproof DPDT: Wire Lug Momentary Mustang Pushbutton SPDT: Wire Lug Push-On/Push-Off Mustang Pushbutton SPDT: Wire Lug Momentary DPDT: Wire Lug Momentary 15/32" Bushing Black Cap with 0.39" Diameter used on MPA, MPE, MPS Red Cap with 0.39" Diameter used on MPA, MPE, MPS Black Cap with 0.59" Diameter used on MPA, MPE, MPS Red Cap with 0.59" Diameter used on MPA, MPE, MPS EACH Lead Spacing A B C D E 1-99 100-499 500-999 N N N 0.170 0.170 0.190 0.170 0.190 0.170 0.170 0.170 0.170 0.170 0.170 N N N N 1.122 1.122 1.122 1.600 1.602 1.602 1.618 1.618 1.610 1.405 1.405 1.405 N N N N 0.354 0.354 0.354 0.315 0.512 0.512 0.320 0.320 0.512 0.315 0.315 0.512 N N N N 0.236 0.236 0.236 0.472 0.472 0.472 0.472 0.472 0.472 0.315 0.315 0.315 N N N N 0.236 0.236 0.236 0.280 0.280 0.280 0.280 0.280 0.280 0.473 0.473 0.473 N N N N 0.500 0.500 0.500 0.680 0.680 0.680 0.690 0.690 0.690 0.460 0.460 0.460 N N N N 3.44 9.46 9.25 9.52 11.59 13.64 12.95 10.91 13.56 12.39 6.97 17.89 .58 .60 .98 .67 2.76 7.61 7.43 7.64 9.30 10.95 10.39 8.76 10.88 9.95 5.60 14.36 .47 .48 .78 .53 2.32 6.39 6.25 6.41 7.82 9.18 8.73 7.36 9.13 8.35 4.70 12.06 .39 .40 .65 .45 *Caps not supplied. Black cap supplied. Refer to full line catalog, model number C90. MP/MSP Series Pushbutton Switch Material Specifications: Contacts: MSPF/MSP3/MSPS: Silver plate. MSPM: Gold. Case Material: MPSF: Thermoset. MSPM: Steel. MSP3/MSPS: Thermoplastic. Actuator Material: MSPM: Nylon. MSPF/MSP3/MSPS: Thermoplastic. Terminals: Silver plate. Typical Performance Characteristics.Contact Rating: MSPF: 0.5 Amps at 125 VAC. MSPM: 1.0 VA optimum (100 mA max. 50 VDC max.). MSP3: 3 Amps at 125 VAC. MSPS: 0.5 Amps at 125 VAC. Life Expectancy: MSPF: 10000 cycles min. MSPM: 5000000 cycles at 0.1 VA. MSP3/MSPS: 10000 Cycles. Operating Temperature: MSPF: 20C to 80C. MSPM: 10C to 80C. MSP3/MSPS: 20C to 80C. Dimensions N In. Stock No. Mfr.Os Type Fig. Description 758-0154 758-0156 758-0164 758-0150 758-0152 758-0158 758-0160 MSPM101C1* MSPM101CS1 MSPS103C0 MSPF101C MSPF101BC0 MSP103B MSP103C 1 1 1 2 2 2 2 SPST: Normally Open, Pin Terminals N Red Cap SPST: Normally Open, Lug Terminals N Red Cap SPST: Normally Open N Black Plunger SPST: Normally Open N Red Plunger 2 Circuit: Normally Open-Normally Closed N Black Plunger SPST: Normally Closed N Black Plunger SPST: Normally Open N Red Plunger EACH Lead Spacing A B C D E 1-99 100-499 500-999 0.284 0.280 0.189 0.140 0.177 0.242 0.242 1.640 1.240 1.050 0.980 0.980 1.039 1.039 0.510 0.510 0.310 N N 0.410 0.410 0.480 0.160 0.201 0.256 0.256 0.098 0.098 0.320 0.320 0.252 0.374 0.374 0.235 0.235 0.560 0.560 0.380 0.176 0.176 0.520 0.520 22.56 24.23 1.88 3.68 7.40 4.33 4.15 18.11 19.46 1.52 2.95 5.95 3.48 3.34 15.21 16.34 1.28 2.48 4.99 2.91 2.80 *Caps model number C22 supplied. Reliant '22 Series Oil Tight Industrial Controls c c c c c c Fits 7/8" (22 mm) Diameter Holes Protection Level: 1 P 65 Buttons Are Full Size Meets NEMA 1, 12, 13 Finish: Matte Black Bezel Simple ONo-ToolO Mounting c Fully Insulated N Thermoplastic or Heavy-Duty Metal Bushings c Contacts: Double-Break Silver Snap-Block, 6 A @ 600 VAC c Stackable These controls utilize a snap-on contact block system with pushbuttons for a variety of switching configurations N momentary and maintained, lighted and unlighted, round and square keylocks and selectors. Suited for direct and pilot duty. Maximum contact rating of 6 A at 600 VAC. Contemporary front panel design. Order contact blocks separately. Dimensions N In. Stock No. Mfr.Os Type Fig. Description 758-0500 758-9705 758-0501 758-0602 758-0504 758-0506 758-0508 758-0514 758-0512 758-0516 758-0518 758-0520 758-0522 758-0524 RM0100 RM0102 RM0105 RT0102 RM0502 RT0502 RM0532 RM0652 RM3040 RM201 F40 F50 V40 V50 1 1 1 1 2 2 2 2 3 4 5 5 5 5 Flush Round Button N Momentary N Metal Threaded Bushing N Black Button Flush Round Button N Momentary N Metal Threaded Bushing N Red Button Flush Round Button N Momentary N Metal Threaded Bushing N Green Button Flush Round Button N Momentary N Thermoplastic Threaded Bushing N Red Button Red Mushroom Button N Momentary N Metal Bayonet Red Mushroom Button N Momentary N Thermoplastic Threaded Bushing Red Mushroom Button N Push-Pull N Metal Threaded Bushing Red Mushroom Button N Push to Lock/Twist Release N Metal Threaded Bushing Black Selector Operator N 2 Pos. 60 Throw N Metal Threaded Bushing Key Lock Operator N Maintained N 2 Pos. 60 Throw N Metal Threaded Bushing Normally Closed Contact Block with Quick Connects N Red Plunger Normally Open Contact Block with Quick Connects N Green Plunger Normally Closed Contact Block N Screw Terminal N Red Plunger Normally Open Contact Block N Screw Terminal N Green Plunger EACH A B C D 1-99 100-249 250-499 1.496 1.496 1.496 1.496 2.185 2.185 2.185 2.185 2.087 1.929 N N N N 1.160 1.160 1.160 1.160 1.570 1.570 1.570 1.570 1.160 1.160 N N N N 0.450 0.450 0.450 0.450 1.140 1.140 1.140 1.140 1.040 0.886 N N N N 1.043 1.043 1.043 1.043 1.043 1.043 1.043 1.043 1.043 1.043 N N N N 25.28 25.35 25.19 9.69 37.18 20.84 51.61 22.99 32.31 59.53 8.45 9.66 11.23 7.19 20.29 20.34 20.22 7.78 29.84 16.72 41.43 18.46 25.94 47.78 6.79 7.74 9.03 5.77 17.05 17.09 16.99 6.54 25.07 14.05 34.80 15.50 21.78 40.14 5.70 6.51 7.58 4.85 ASE/F Series Auto-Insertable Slides Units withstand aqueous or solvent cleaning processes. High temperature antistatic plastic withstands surface mount, vapor phase reflow or wave soldering. Type ASE. Extended actuator open-ended case allows washout after cleaning. Type ASF. DIP package with flush actuator allows auto insertion on standard IC equipment. Tape seal and closed case provide process seal. Bevel Length: 0.260" (6.60) except 4P3T N 0.360" (9.14). Surface mount terminals (not shown) 0.100" (2.54) on center. R-right angle. 758-2000. ASE22. DPDT. 1-99 .............EACH 1.36 758-2001. ASE42. 4PDT. 1-99..............EACH 2.27 758-2003. ASF22. DPDT. 1-99 .............EACH 2.07 100-249.....................................EACH 1.10 100-249.....................................EACH 1.83 100-249.....................................EACH 1.66 250-499 ....................................EACH .92 250-499 ....................................EACH 1.54 250-499 ....................................EACH 1.40 Check Pricing And Availability Of All Items On The Internet At www.alliedelec.com ALLIED c 257 5