Busbar System CENC4 A quick reliable solution for ground, neutral or low voltage distribution applications. The Busbar System consists of a busbar, busbar supports, and screw clamp terminals for terminating wires NEB 10 (10 x 3 mm) and NEB 6 (6 x 6 mm), tin plated copper busbars are available in one meter lengths. Both have a 140A current carrying capacity. NES plastic support with fixing screws for holding 10 x 3 & 6 x 6 busbar makes placing of busbar an easy task. Busbars up to 200 mm length should be supported at ends by two busbar supports. For busbars exceeding 200 mm length, it is recommended to provide intermediate busbar support. Easy to operate CENC clamp secures wire to the busbar. CENC16 CENC35 Terminal Width 7.5 mm 9.8 mm 14.5 mm Height x Length 30 x 23.3 mm 36 x 23.3 mm 45 x 27.3 mm Stripping Length 12 mm 16 mm 16 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 1 screw clamp connection 1 screw clamp connection 1 screw clamp connection Approvals E220514 Wire Range Current Rating* Torque E220514 E220514 22-10 AWG 0.5-6 sq.mm 22-12 AWG 10-4 AWG 6-16 sq.mm 10-6 AWG 8-2 AWG 10-35 sq.mm 8-2 AWG 35 A 41 A 14 lb-in 0.8 Nm 14 lb-in 80 A 76 A 14 lb-in 2.0 Nm 125 A 125 A 17.5 lb-in 25 lb-in 2.5 Nm 25 lb-in Other Approvals Cat. No. Std. Pk. Cat. No. Cat. No. CENC4 Busbar (10 x 3 mm) NEB10 1m NEB10 1m NEB10 1m Busbar (6 x 6 mm) NEB6 1m NEB6 1m NEB6 1m Plastic Support with Fixing Screw NES 50 NES 50 NES 50 End Clamp/Bus bar support for rail mounting CA202 50 CA202 50 CA202 50 Marking Tags (MT Type) MT5 100 MT6 100 MT6 100 50 CENC35 Std. Pk. Terminal Block** 50 CENC16 Std. Pk. 50 * 140A current carrying capacity of busbar should be taken into account while connecting loads. ** Consult for other available colors. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 49 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Altech: NEB10 NEB6