RS-150-3.3 - M+R Multitronik GmbH

ENVIRONMENT

PROTECTION

SPECIFICATION

MODEL RS-150-3.3 RS-150-5 RS-150-12 RS-150-15 RS-150-24 RS-150-48

DCVOLTAGE

RATEDCURRENT

CURRENTRANGE

RATEDPOWER

RIPPLE&NOISE(max.) Note.2

OUTPUT VOLTAGE ADJ.RANGE

VOLTAGETOLERANCE Note.3

LINEREGULATION Note.4

LOADREGULATION Note.5

SETUP,RISE,HOLDTIME

VOLTAGERANGE

FREQUENCY RANGE

EFFICIENCY(Typ.)

ACCURRENT

INPUT

INRUSHCURRENT(max.)

LEAKAGECURRENT

SAFETY STANDARDS

HARMONICCURRENT

EMSIMMUNITY

WORKINGTEMP.

WORKINGHUMIDITY

STORAGETEMP.,HUMIDITY

TEMP.COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVERLOAD

OVERVOLTAGE

3.3V 5V 12V 15V 24V 48V

30A 26A 12.5A 10A 6.5A 3.3A

0~30A 0~26A 0~12.5A 0~10A 0~6.5A 0~3.3A

99W 130W 150W 150W 156W 158.4W

80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p

3.2V~3.5V 4.75~5.5V 11.4~13.2V 14.25~16.5V 22.8~26.4V 45.6~52.8V

3.0% 2.0% 1.0% 1.0% 1.0% 1.0%

0.5% 0.5% 0.5% 0.5% 0.5% 0.5%

2.0% 1.0% 0.5% 0.5% 0.5% 0.5%

800ms,20ms,20ms/230VAC1200ms,30ms,10ms/115VAC atfullload

88~132VAC/176~264VACselectedbyswitch248~373VDC(300VACpeak5sec.Nodamage)

47~63Hz

75%

3.8~4.45V 5.75~6.75V 13.8~16.2V 17.25~20.25V 27.6~32.4V 55.2~64.8V

78% 83% 84% 86% 87%

3A/115VAC2A/230VAC

COLDSTART 50A/230VAC

<2mA /240VAC

110~150% ratedoutputpower

Protectiontype:Hiccupmode,recoversautomaticallyafterfaultconditionisremoved

UL60950-1, TUVEN60950-1 Approved

CompliancetoEN55022(CISPR22)ClassB

Complianceto EN61000-3-2,-3

CompliancetoEN61000-4-2,3,4,5,6,8,11;ENV50204,EN61000-6-2(EN50082-2)heavyindustrylevel,criteria A

-20~+70 (Refertooutputloadderatingcurve)

20~90%RH non-condensing

-20~+85 ,10~95%RH

0.03%/ (0~50 )

10~500Hz,5G10min./1cycle,periodfor 60min.eachalongX, Y,Zaxes

244KHrsmin.MIL-HDBK-217F(25 )

199*98*38mm(L*W*H)

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Line regulation is measured from low line to high line at rated load.

5. Load regulation is measured from 0% to 100% rated load.

6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

FileName:RS-150-SPEC2004-03-25

Protectiontype: Hiccupmode,recoversautomaticallyafterfaultconditionisremoved

0.7Kg;20pcs/14Kg/0.72CUFT

150WSingleOutputSwitchingPowerSupply

Universal AC input / Full range

Protections:Short circuit/Over load/Over voltage

Cooling by free air convection

LED indicator for power on

100% full load burn-in test

High realibility

Features :

RS-150 seri es

WITHSTANDVOLTAGE

ISOLATIONRESISTANCE

I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC

I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC

EMICONDUCTION&RADIATION

SAFETY &

EMC

(Note6)