REV, 6/3/05 50 MICRO-INCHES [1.27um]] SS7188SAPG41BA50 2 1 DATE REV ECN APP'D. BY ( 148 [3.75] ) HIGHEST POINT OF BEAM wo STEWART o ( .068 [1.73] ) PATENTED 8 J " .125 +.010 [3.18 +0.25 4 c [ ] { A ( .016 [0.41] ) 155 [3.937] TYP. : f | 450 [11.43] __| ( .083 [2.12] ) HIGHEST POINT ( 040 [1.02] ) TYP. NOTES: OF BEAM 1. CONNECTOR MATERIALS: | HOUSING: THERMOPLASTIC UL94 V-0 3g _ CONTACTS/SHIELD: COPPER ALLOY = 050 [1.27] _ SHIELD PLATING: NICKEL OR TIN z -] 100 [2.54] (6) zs CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA ] S So SEE CHART FOR PART NUMBER 3 6.035 [0.88] #.003 [0.08] (8) 50 [127](7) gS 2. FOR PRODUCT SPECIFICATIONS SEE PRO22-01. < 3 3. DIMENSIONS AND TOLERANCES COMPLY WITH FCC/CFR 47, PART 68. [006 [0.15]] \ {| 8 t | [0.15] o-6-6- 4. THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE Ne ---@ L USER THE ABILITY TO HAVE REASONABLE JACK /PANEL 128 [3.25] PIN 1_~ } CLEARANCES, YET MAINTAIN GROUNDING CAPABILITY. g1F] (9) THESE VARIABLES CAN BE ADJUSTED IN EITHER DIRECTION ry my $5 [3.18] | BUT MAY CARRY SOME CONSEQUENCES IN THE FORM OF o 6 + [006 [0.15]] - 4 - LOWER MATING FORCES OR TIGHTER ASSEMBLY TOLERANCES. rosF FP 7 ( 041 [1.03] ) _ L@ 5, DESIGNED FOR CATEGORY 5/5e APPLICATIONS. 2. 4. 6. 8 O41 LI. eae ae Op TP. 080 [2.03] = 9.065 [1.65] +. or [0.08] (2) B L450 [11.43] =, a 656 [16.66] 554 [14.07] R.010 [0.25] (4) MAX. L , L 000 [0.00] TOP OF PCB 610 [15.49] ~ P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE 30 MICRO-INCHES [0.76um] SS7188SAPG4-1-BA ALL CENTERLINE DIMENSIONS ARE BASIC. | CONTACT PLATING IN MATING AREA PART NUMBER THIRD ANGLE PROJECTION Cn Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com =) DO NOT SCALE DRAWING DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE = EIGHT CONTACT, EIGHT POSITION; VERTICAL MOUNT SHIELDED CAT 5/5e JACK, EMI-RFI ONE PIECE SHIELDED, ESD GROUNDED y DIMENSIONS: INCHES [METRIC] UNLESS OTHERWISE SPECIFIED ORN BY: DATE THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF KRL 3/ 20/ 06 TO BOTTOM VY, TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APPD BY: DATE Sony SUGGESTED PANEL OPENING ~1-275 [6.90] MAX. ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN TRM 5-21-06 SHEET NO. CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT |DWG NO. REV. 1 OF 1 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. CT/10025 AS 2 1 AutoCAD