DL4001
THRU
DL4007
1 Amp Glass
Passivated Rectifier
50 to 1000 Volts
MELF
SUGGESTED SOLDER
PAD LAYOUT
Features
• Glass Passivated Junction
• Low Current Leakage
• Surface Mount Applications
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .185 .205 4.70 5.20
B .018 .022 0.46 0.56 Nominal
C .095 .105 2.40 2.67 ∅
Maximum Ratings
MCC
Part Number
Device
Marking
Maximum
Recurrent
Peak
Reverse
Voltage
Maximum
RMS
Voltage
Maximum
DC
Blocking
Voltage
DL4001 ------- 50V 35V 50V
DL4002 ------- 100V 70V 100V
DL4003 ------- 200V 140V 200V
DL4004 ------- 400V 280V 400V
DL4005 ------- 600V 420V 600V
DL4006 ------- 800V 560V 800V
DL4007 ------- 1000V 700V 1000V
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward
Current
IF(AV) 1.0A TA = 75°C
Peak Forward Surge
Current
IFSM 30A 8.3ms, half sine
Maximum
Instantaneous
Forward Voltage
VF1.1V IFM = 1.0A;
TJ = 25°C*
Maximum DC
Reverse Current At
Rated DC Blocking
Voltage
IR5.0µA
50µA
TJ = 25°C
TJ = 125°C
Typical Junction
Capacitance
CJ12pF Measured at
1.0MHz, VR=4.0V
*Pulse test: Pulse width 300 µsec, Duty cycle 2%
A
B
C
Cathode Mark
.220”
.035”
.115”
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC
Revision: A 2011/01/01
TM
Micro Commercial Components
www.mccsemi.com
1 of 3
• Operating Temperature: -65°C to +150°C
• Storage Temperature: -65°C to +150°C
• Maximum Thermal Resistance; 30°C/W Junction To Lead
DL4001
NOT RECOMMENDED FOR NEW DESIGNS
USE GS1A-LTP~GS1M-LTP SERIES
• Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
• Epoxy meets UL 94 V-0 flammability rating
• Moisture Sensitivity Level 1
Notes: 1. High Temperature Solder Exemption Applied, see EU Directive Annex Notes 7.
Average Forward Rectified Current - Amperes versus
Ambient Temperature - °C
Figure 2
Forward Derating Curve
017550 75 100 125
0
.2
.4
.6
Single Phase, Half Wave
60Hz Resistive or Inductive Load
Amps
°C
150
.8
1.0
1.2
Junction Capacitance - pF versus
Reverse Voltage - Volts
Instantaneous Forward Current - Amperes versus
Instantaneous Forward Voltage - Volts
Figure 1
Typical Forward Characteristics
4
6
20
10
Amps
.4 .6 .8 1.0 1.2 1.4
.01
.02
.04
.06
.1
.2
.4
.6
1
2
25°C
Volts
Figure 3
Junction Capacitance
.1 .2 1.4 2 10 20 404 100 200
1
2
6
10
20
100
pF
Volts
60
40
4
400 1000
TJ=25°C
MCC
DL4001 thru DL4007
Revision: A 2011/01/01
TM
Micro Commercial Components
www.mccsemi.com
2 of 3
MCC
Revision: A 2011/01/01
TM
Micro Commercial Components
www.mccsemi.com
3 of 3
Device Packing
Part Number-TP Tape&Reel: 5Kpcs/Reel
Ordering Information :
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
