GTC 003 2010 Capacitors for AC and DC General Purpose Applications Proven EIA-456 Compliant 60,000 Hour Reliability Industry Standard Just Capacitors GTC 944 Clint Moore Road, Boca Raton, Florida 33487 USA Phone: (561) 989-8080 Fax: (561) 989-8101 Email: capainfo@justcapacitor.com www.gent apacitors.co www.justcapacitors.com Table of Contents 01 Descriptive Information 02 Product Safety 04 General Purpose AC Capacitors - GEM III 240 & 370 Volts AC Product Specifications 06 Single Ratings - 1 Section 07 Application Notes / Data 09 600 Volts AC Product Specifications 14 Single Ratings - 1 Section 15 Application Notes / Data 16 660 Volts AC (Series Section) Product Specifications 21 Single Ratings - 1 Section 22 Application Notes / Data 23 1000 Volts DC Peak Product Specifications 28 Single Ratings - 1 Section 29 Cross Reference - 600 Volts AC 26F6600 to NEW 27L 30 61L to NEW 27L 31 Mounting Hardware 32 Capacitor Label 34 Other Catalogs 35 GTC 003- 02 / 10 www.justcapacitors.com Descriptive Information 02 Genteq Capacitors Capacitors for General Purpose Applications Metallized film capacitors are unsurpassed in terms of size, weight, performance, and reliability for AC applications. Regal-Beloit brings over 60 year of capacitor manufacturing experience to the product lines described in this publication. These capacitors represent the best in product design for long-term reliability and safe operation. Regal-Beloit's materials, product, and process development work continue to provide capacitor users with outstanding total value. The specific products in this bulletin are aimed at market / application segments for General Purpose, Power Supply, and Electronic Power Conversion. The GEM III General Purpose Capacitors are used for filtering on a wide variety of light industrial equipment. The conversion of electrical power and uninterruptible power supplies and drive control systems requires filter capacitors. An application note is included to help customers in the correct choice and use of these capacitors. GTC 003- 02 / 10 www.justcapacitors.com Descriptive Information GEM III Construction 03 GEM III Series Construction Regal-Beloit's GEM III capacitors are manufactured with high-grade metallized polypropylene film. This film is in the range of 5 to 10 microns thick, depending on the application, voltage, and conditions. The metallized electrode is several hundred angstroms thick. The film is wound into capacitor rolls on high-speed, highprecision machines. The winding is extremely tight so that there is not enough space between the layers for corona (localized partial electrical discharges) to occur. The rolls are sprayed on both ends with metal to make the connection to the extremely thin edges of the metallized electrodes. This process is critical to the quality and performance of the capacitors. The rolls are assembled in metal cases, Regal-Beloit's proprietary Dielektrol VI liquid is introduced under vacuum, and the capacitors are sealed. They are then subjected to 100% electrical testing for capacitance, dissipation factor, and high potential electrical withstand, both terminal-to-terminal and terminal-to-case. GTC 003- 02 / 10 www.justcapacitors.com Product Safety 04 Pressure Sensitive Interrupter All the capacitors listed in this publication contain Regal-Beloit's Pressure Sensitive Interrupter (PSI). This device, developed by GE, is designed to sense the build-up of pressure within the capacitor if a fault occurs and to interrupt the internal electrical connections before the case can rupture. The PSI carries U.L.* recognition for applications where the specified fault currents are not exceeded. The fault current is the maximum current that is available from the circuit to flow through the capacitor if the capacitor were to become a short circuit with zero impedance. It is the responsibility of the capacitor user to determine what the available fault current is for a particular application. In the Catalog Number listings a four character U.L. Code, Pxxx, is given. This number is part of the listing for Regal-Beloit in U.L. File No. E322597. When applying to U.L. for approvals or recognition of equipment using these capacitors refer to the Pxxx number and not the Catalog Number of the capacitor in question. Proper operation of the PSI requires that the cover be able to expand without restriction. The following mounting considerations should be noted in mounting the these capacitors. *Underwriter's Laboratory GTC 003- 02 / 10 www.justcapacitors.com Product Safety 05 Mounting Considerations Vertical Clearance There must be sufficient clearance between the tops of the terminals (and/or the assembled wire connectors) and a plane perpendicular to the capacitor terminals. This clearance must be at least 0.5 inches plus the electrical spacing requirements of the end application. Cut-Out Clearance In certain instances, capacitors are mounted with the top of the capacitors case resting against the chassis and the terminals protruding through the chassis. Care must be taken to see that the cutout in the chassis is large enough. The following dimensions are recommended. GTC 003- 02 / 10 0.5" min. plus end application spacing Case Style A B C D a 2.00 2.25 2.50 3.25 b 1.00 1.25 1.62 1.62 www.justcapacitors.com Case Style P S T a 1.62 1.88 2.38 Gen Purpose AC Capacitors - GEM III 06 240 & 370 VAC This series of GEM III is designed specifically for applications such as AC filters where harmonic frequencies greater than 60Hz are common. Application Data is provided starting on page 9 that gives the Equivalent Series Resistance (ESR) for these units. This allows the user to calculate the losses for each design / application and to ensure that they are kept within the permissible limits. Any questions regarding the suitability of a capacitor for a particular application may be referred to Regal-Beloit Engineers by contacting your Regal-Beloit sales representative. SPECIFICATIONS: Available Capacitance Range: 2 to 120F Capacitance Tolerance: 6% Capacitance Variation with Temperature: See Chart E-3 on page 13. Rated Voltage: See Rating Tables. Rating is the 60Hz RMS voltage for a sinusoidal waveform. For other waveforms refer to the Application Note on page 9. Leakage Current: 30A maximum Frequency: 50/60 Hz. For higher frequencies refer to the Application Note on page 10. Operating Temperature: -40C to +70C Storage Temperature: -40C to +90C Operating Life: 60,000 hours with 94% survival (In accordance with the EIA-456 Industry Standard) Dissipation Factor: 0.1% maximum Case Material/Finish: Unpainted Aluminum Case, Tin Plated Steel Cover. Terminations: `Combo' terminal: 0.250" x 0.031" quick connect blades Dielectric Fluid: Dielektrol VI Internal Protection: UL recognized Pressure Sensitive Interrupter. See Ratings Table for Regal-Beloit's UL Code Number listed under Regal-Beloit's UL File E322597. For UL submittals with these capacitors, use the RBC `Pxxx' number not the Catalog Number. The corresponding generic UL designation that includes the Available Faults Current (AFC) rating is given below. All these capacitors are capable of interrupting available fault currents of up to 10,000 amperes. Case Style RBC Code Generic UL Code A P921 A10000AFC P P965 P10000AFC S P968 S10000AFC T P969 T10000AFC GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III 07 Single Ratings - 1 Section 240 Voltage (VAC) Capacitance (F) 15.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 120.0 Catalog Number 97F8036 97F8037 97F8038 97F8039 97F8040 97F8041 97F8042 97F8043 97F8044 97F8045 97F8046 97F8047 97F8048 97F8049 97F8050 97F8051 97F8052 97F8053 Case Style P P P P P P P P S S S S T T T T T T Base Size (in.) 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 2.00 2.00 2.00 2.00 2.50 2.50 2.50 2.50 2.50 2.50 Can Type Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Height C (in.) 2.88 2.88 3.88 3.88 3.88 4.75 4.75 4.75 4.75 4.75 4.75 4.75 3.88 3.88 3.88 4.75 4.75 4.75 UL Code P965 P965 P965 P965 P965 P965 P965 P965 P968 P968 P968 P968 P969 P969 P969 P969 P969 P969 Case Style P, S, and T (4) .250 x .031 Blades per terminal except (3) on case style P Case Style P S T K 1.75 2.00 2.50 J 1.88 2.12 2.62 *It is Regal-Beloit's goal to serve you with the most cost effective and highest quality capacitor designs. Standardization to the catalog type shown is a major program at Regal-Beloit. However, Regal-Beloit remains sensitive to your needs and requirements, and will continue to offer the above ratings (and more) in case configurations to meet your application(s). GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III 08 Single Ratings - 1 Section Capacitance (F) 3.0 4.0 5.0 6.0 7.5 10.0 12.5 Catalog Number 97F8054 97F8055 97F8056 97F8057 97F8058 97F8059 97F8060 Case Style A A A A A A A Base Size (in.) 1.25 1.25 1.25 1.25 1.25 1.25 1.25 Can Type Oval Oval Oval Oval Oval Oval Oval Height C (in.) 2.12 2.12 2.88 2.88 2.88 3.88 3.88 UL Code P921 P921 P921 P921 P921 P921 P921 15.0 17.5 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 97F8061 97F8062 97F8063 97F8064 97F8065 97F8066 97F8067 97F8068 97F8069 97F8070 97F8071 97F8072 97F8073 P P P P P P P S S S T T T 1.75 1.75 1.75 1.75 1.75 1.75 1.75 2.00 2.00 2.00 2.50 2.50 2.50 Round Round Round Round Round Round Round Round Round Round Round Round Round 2.88 2.88 3.88 3.88 3.88 4.75 4.75 4.75 4.75 4.75 3.88 3.88 4.75 P965 P965 P965 P965 P965 P965 P965 P968 P968 P968 P969 P969 P969 370 Voltage (VAC) Case Style P, S, and T Case Style A (4) .250 x .031 Blades per terminal (4) .250 x .031 Blades per terminal except (3) on case style P Case Style P S T K 1.75 2.00 2.50 J 1.88 2.12 2.62 *It is Regal-Beloit's goal to serve you with the most cost effective and highest quality capacitor designs. Standardization to the catalog type shown is a major program at Regal-Beloit. However, Regal-Beloit remains sensitive to your needs and requirements, and will continue to offer the above ratings (and more) in case configurations to meet your application(s). GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III 09 Application Notes - 97F8000 Series - 240 & 370 VAC ESR Values for 97F8000 Series - Curve Numbers refer to Graphs on Page 10. Catalog Number 97F8036 97F8037 97F8038 97F8039 97F8040 97F8041 97F8042 97F8043 97F8044 97F8045 97F8046 97F8047 97F8048 97F8049 97F8050 97F8051 97F8052 97F8053 Capacitance (F) 15.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 120.0 ESR (ohms) 0.0257 0.0180 0.0228 0.0206 0.0190 0.0241 0.0226 0.0213 0.0215 0.0206 0.0198 0.0191 0.0164 0.0160 0.0156 0.0193 0.0189 0.0176 Voltage (VAC) Curve Number 2 2 3 3 3 4 4 4 5 5 5 5 5 5 5 6 6 6 370 240 Voltage (VAC) Catalog Number 97F8054 97F8055 97F8056 97F8057 97F8058 97F8059 97F8060 Capacitance (F) 3.0 4.0 5.0 6.0 7.5 10.0 12.5 ESR (ohms) 0.0700 0.0539 0.0586 0.0499 0.0411 0.0471 0.0392 Curve Number 1 1 2 2 2 3 3 97F8061 97F8062 97F8063 97F8064 97F8065 97F8066 97F8067 97F8068 97F8069 97F8070 97F8071 97F8072 97F8073 15.0 17.5 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 0.0244 0.0218 0.0281 0.0240 0.0213 0.0262 0.0240 0.0235 0.0222 0.0210 0.0175 0.0169 0.0207 2 2 3 3 3 4 4 5 5 5 5 5 6 The 97F8000 Series of capacitors may be used in AC applications where the voltage waveform is non-sinusoidal. This Application Note is provided to assist in the correct use of the capacitors where higher frequency harmonic currents are present. If you need further assistance please contact Regal-Beloit's Capacitors Operation through your normal sales channel. Higher frequency currents are commonly encountered in the filter circuits of Static Power Converters. These frequencies range from 180 to 1500 Hz for a 60 Hz system in various combinations of the odd harmonics depending on the type of converter. Generally, there are not significant harmonic currents above the 25th harmonic. These capacitors can carry a total current of up to 15 amperes RMS (fundamental plus harmonics). The Equivalent Series Resistance (ERS) for each Catalog Number is shown in the ESR tables on this page. This value may be used to calculate the expected watts loss for a particular application. The user must determine the total RMS current (fundamental plus harmonics) for the application. The watts loss is then calculated using the equation: W=I2 x ESR I = Total RMS current ESR = Value from ESR Tables The calculated watts from this equation must not exceed the allowable watts loss shown on the curve corresponding to the particular capacitor. Two sets of curves are shown, one for natural circulation and one for forced air circulation. NOTES: (1) In no case should the total RMS current of 15 amperes be exceeded for any of these capacitors (2) Running the capacitors at case temperatures above 70C will have a significant effect on expected life. (See chart G-1 on page 11). (3) Running the capacitors at voltages above the nominal rated voltage will also results in significantly reduced life. (See chart G-2 on page 12). GTC 003- 02 / 10 www.justcapacitors.com 10 Gen Purpose AC Capacitors - GEM III Application Notes - 97F8000 Series - 240 & 370 VAC Maximum Allowable Watts Loss ALLOWABLE WATTS LOSS - Natural Circulation Ambient Temperature (Degrees oC) - Natural Circulation Maximum Allowable Watts Loss ALLOWABLE WATTS LOSS - Forced Circulation Ambient Temperature (Degrees oC) - Forced Circulation GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III Application Data LIFE vs. TEMPERATURE % of Life CHART G-1 Temperature (Degrees oC) GTC 003- 02 / 10 www.justcapacitors.com 11 Gen Purpose AC Capacitors - GEM III 12 Application Data LIFE vs. VOLTAGE % of Life CHART G-2 % of Rated Voltage GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III Application Data % CAPACITANCE vs. TEMPERATURE % of Capacitance Change CHART E-3 Temperature (Degrees oC) GTC 003- 02 / 10 www.justcapacitors.com 13 Gen Purpose AC Capacitors - GEM III 14 600 VAC This series of GEM III is designed specifically for general purpose AC applications in power supplies, UPS, and power conversion equipment. Application Data is provided starting on page 16 that gives the Equivalent Series Resistance (ESR) for each unit. This allows the user to calculate the losses for each design / application and to ensure that they are kept within the permissible limits. Any questions regarding the suitability of a capacitor for a particular application may be referred to Regal-Beloit Engineers by contacting your Regal-Beloit sales representative. SPECIFICATIONS: Available Capacitance Range: 1.5 to 45F Capacitance Tolerance: 6% Capacitance Variation with Temperature: See Chart E-3 on page 20. Rated Voltage: See Rating Tables. Rating is the 60Hz RMS voltage for a sinusoidal waveform. For other waveforms refer to the Application Note on page 16. Leakage Current: 30A maximum Frequency: 50/60 Hz. For higher frequencies refer to the Application Note on page 17. Operating Temperature: -40C to +70C Storage Temperature: -40C to +90C Operating Life: 60,000 hours with 94% survival (In accordance with the EIA-456 Industry Standard) Dissipation Factor: 0.1% maximum Case Material/Finish: Unpainted Aluminum Case, Tin Plated Steel Cover. Contact Regal-Beloit if material/finish to meet UL outdoor standards is required. Terminations: `Combo' terminal: 0.250" x 0.031" quick connect blades Dielectric Fluid: Dielektrol VI Internal Protection: UL recognized Pressure Sensitive Interrupter. See Ratings Table for Regal-Beloit's UL Code Number listed under Regal-Beloit's UL File E322597. For UL submittals with these capacitors, use the RBC `Pxxx' number not the Catalog Number. The corresponding generic UL designation that includes the Available Faults Current (AFC) rating is given below. All these capacitors are capable of interrupting available fault currents of up to 10,000 amperes. Case Style RBC Code Generic UL Code A P961 A10000AFC B P962 B10000AFC C P963 C10000AFC D P964 D10000AFC GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III 15 Single Ratings - 1 Section 600 Voltage (VAC) Capacitance (F) 1.5 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 18.0 20.0 25.0 30.0 35.0 40.0 45.0 Catalog Number 97F8240 97F8241 97F8242 97F8243 97F8244 97F8245 97F8246 97F8247 97F8248 97F8249 97F8250 97F8251 97F8252 97F8253 97F8254 97F8255 97F8256 97F8257 97F8258 Case Style A A A A A A A A A B B B B B C D D D D Base Size (in.) 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.50 1.50 1.50 1.50 1.50 1.75 2.00 2.00 2.00 2.00 Can Type Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Height C (in.) 2.12 2.12 2.88 2.88 2.88 3.88 3.88 4.75 4.75 3.88 3.88 3.88 4.75 4.75 4.75 3.88 4.75 4.75 4.75 UL Code P961 P961 P961 P961 P961 P961 P961 P961 P961 P962 P962 P962 P962 P962 P963 P964 P964 P964 P964 Case Style A, B, C, and D (4) .250 x .031 Blades per terminal Case Style A B C D a 2.16 2.69 2.91 3.66 b 1.31 1.56 1.91 1.97 *It is Regal-Beloit's goal to serve you with the most cost effective and highest quality capacitor designs. Standardization to the catalog type shown is a major program at Regal-Beloit. However, Regal-Beloit remains sensitive to your needs and requirements, and will continue to offer the above ratings (and more) in case configurations to meet your application(s). GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III 16 Application Notes - 97F8200 Series - 600 VAC ESR Values for 97F8200 Series - Curve Numbers refer to Graphs on Page 17. 600 Voltage (VAC) Catalog Number 97F8240 97F8241 97F8242 97F8243 97F8244 97F8245 97F8246 97F8247 97F8248 97F8249 97F8250 97F8251 97F8252 97F8253 97F8254 97F8255 97F8256 97F8257 97F8258 Capacitance (F) 1.5 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 18.0 20.0 25.0 30.0 35.0 40.0 45.0 ESR (ohms) 0.1277 0.0971 0.0984 0.0831 0.0639 0.0723 0.0615 0.0739 0.0657 0.0404 0.0366 0.0309 0.0361 0.0334 0.0294 0.0220 0.0258 0.0240 0.0225 Curve Number 1 1 2 2 2 3 3 4 4 4 4 4 5 5 5 5 6 6 6 The 97F8200 Series of capacitors may be used in AC applications where the voltage waveform is non-sinusoidal. This Application Note is provided to assist in the correct use of the capacitors where higher frequency harmonic currents are present. If you need further assistance please contact Regal-Beloit's Capacitors Operation through your normal sales channel. Higher frequency currents are commonly encountered in the filter circuits of Static Power Converters. These frequencies range from 180 to 1500 Hz for a 60 Hz system in various combinations of the odd harmonics depending on the type of converter. Generally, there are not significant harmonic currents above the 25th harmonic. These capacitors can carry a total current of up to 15 amperes RMS (fundamental plus harmonics). The Equivalent Series Resistance (ERS) for each Catalog Number is shown in the ESR tables on this page. This value may be used to calculate the expected watts loss for a particular application. The user must determine the total RMS current (fundamental plus harmonics) for the application. The watts loss is then calculated using the equation: W=I2 x ESR I = Total RMS current ESR = Value from ESR Tables The calculated watts from this equation must not exceed the allowable watts loss shown on the curve corresponding to the particular capacitor. Two sets of curves are shown, one for natural circulation and one for forced air circulation. NOTES: (1) In no case should the total RMS current of 15 amperes be exceeded for any of these capacitors (2) Running the capacitors at case temperatures above 70C will have a significant effect on expected life. (See chart G-1 on page 18). (3) Running the capacitors at voltages above the nominal rated voltage will also results in significantly reduced life. (See chart G-2 on page 19). GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III Application Notes - 97F8200 Series - 600 VAC Maximum Allowable Watts Loss ALLOWABLE WATTS LOSS - Natural Circulation Ambient Temperature (Degrees oC) - Natural Circulation Maximum Allowable Watts Loss ALLOWABLE WATTS LOSS - Forced Circulation Ambient Temperature (Degrees oC) - Forced Circulation GTC 003- 02 / 10 www.justcapacitors.com 17 Gen Purpose AC Capacitors - GEM III 18 Application Data LIFE vs. TEMPERATURE % of Life CHART G-1 Temperature (Degrees oC) GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III Application Data LIFE vs. VOLTAGE % of Life CHART G-2 % of Rated Voltage GTC 003- 02 / 10 www.justcapacitors.com 19 Gen Purpose AC Capacitors - GEM III 20 Application Data % CAPACITANCE vs. TEMPERATURE % of Capacitance Change CHART E-3 Temperature (Degrees oC) GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III 21 660 VAC (Series Section) This series of GEM III is designed specifically for general purpose applications in power supplies, UPS, and power conversation equipment. Application Data is provided starting on page 23 that gives the Equivalent Series Resistance (ESR) for these units. This allows the user to calculate the losses for each design / application and to ensure that they are kept within the permissible limits. Any questions regarding the suitability of a capacitor for a particular application may be referred to Regal-Beloit Engineers by contacting your Regal-Beloit sales representative. SPECIFICATIONS: Available Capacitance Range: 2 to 45F Capacitance Tolerance: 6% Capacitance Variation with Temperature: See Chart E-3 on page 27. Rated Voltage: See Rating Tables. Rating is the 60Hz RMS voltage for a sinusoidal waveform. For other waveforms refer to the Application Note on page 23. Leakage Current: 30A maximum Frequency: 50/60 Hz. For higher frequencies refer to the Application Note on page 24. Operating Temperature: -40C to +70C Storage Temperature: -40C to +90C Operating Life: 60,000 hours with 94% survival (In accordance with the EIA-456 Industry Standard) Dissipation Factor: 0.1% maximum Case Material/Finish: Unpainted Aluminum Case, Tin Plated Steel Cover. Terminations: `Combo' terminal: 0.250" x 0.031" quick connect blades Dielectric Fluid: Dielektrol VI Internal Protection: UL recognized Pressure Sensitive Interrupter. See Ratings Table for Regal-Beloit's UL Code Number listed under Regal-Beloit's UL File E322597. For UL submittals with these capacitors, use the RBC `Pxxx' number not the Catalog Number. The corresponding generic UL designation that includes the Available Faults Current (AFC) rating is given below. All these capacitors are capable of interrupting available fault currents of up to 1,000 amperes. Case Style RBC Code Generic UL Code A P851 A1000AFC B P852 B1000AFC C P853 C1000AFC GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III 22 Single Ratings - 1 Section 660 Voltage (VAC) Capacitance (F) 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 18.0 20.0 25.0 30.0 Catalog Number 27L6095 27L6093 27L6094 27L6012 27L6013 27L6014 27L6015 27L6016 27L6017 27L6018 27L6073 27L6089 27L6082 27L6022 27L6023 Case Style A A A A A A A A B B C D D D D Base Size (in.) 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.50 1.50 1.75 2.00 2.00 2.00 2.00 Can Type Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Oval Height C (in.) 3.88 3.88 3.88 3.88 3.88 4.75 4.75 4.75 3.88 4.75 4.75 3.88 4.75 4.75 4.75 UL Code P851 P851 P851 P851 P851 P851 P851 P851 P852 P852 P853 P854 P854 P854 P854 Case Style A, B, C, and D (4) .250 x .031 Blades per terminal Case Style A B C D a 2.16 2.69 2.91 3.66 b 1.31 1.56 1.91 1.97 *It is Regal-Beloit's goal to serve you with the most cost effective and highest quality capacitor designs. Standardization to the catalog type shown is a major program at Regal-Beloit. However, Regal-Beloit remains sensitive to your needs and requirements, and will continue to offer the above ratings (and more) in case configurations to meet your application(s). GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III 23 Application Notes - 27L Series - 660 VAC ESR Values for 27L Series - Curve Numbers refer to Graphs on Page 24. 660 Voltage (VAC) Catalog Number 27L6095 27L6093 27L6094 27L6012 27L6013 27L6014 27L6015 27L6016 27L6017 27L6018 27L6073 27L6089 27L6082 27L6022 27L6023 Capacitance (F) 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 18.0 20.0 25.0 30.0 ESR (ohms) 0.0971 0.0984 0.0831 0.0639 0.0723 0.0615 0.0739 0.0657 0.0404 0.0366 0.0309 0.0361 0.0334 0.0294 0.0220 Curve Number 1 2 2 2 2 3 3 4 4 4 4 4 5 5 5 The 27L Series of capacitors may be used in AC applications where the voltage waveform is nonsinusoidal. This Application Note is provided to assist in the correct use of the capacitors where higher frequency harmonic currents are present. If you need further assistance please contact Regal-Beloit's Capacitors Operation through your normal sales channel. Higher frequency currents are commonly encountered in the filter circuits of Static Power Converters. These frequencies range from 180 to 1500 Hz for a 60 Hz system in various combinations of the odd harmonics depending on the type of converter. Generally, there are not significant harmonic currents above the 25th harmonic. These capacitors can carry a total current of up to 15 amperes RMS (fundamental plus harmonics). The Equivalent Series Resistance (ERS) for each Catalog Number is shown in the ESR tables on this page. This value may be used to calculate the expected watts loss for a particular application. The user must determine the total RMS current (fundamental plus harmonics) for the application. The watts loss is then calculated using the equation: W=I2 x ESR I = Total RMS current ESR = Value from ESR Tables The calculated watts from this equation must not exceed the allowable watts loss shown on the curve corresponding to the particular capacitor. Two sets of curves are shown, one for natural circulation and one for forced air circulation. NOTES: (1) In no case should the total RMS current of 15 amperes be exceeded for any of these capacitors (2) Running the capacitors at case temperatures above 70C will have a significant effect on expected life. (See chart G-1 on page 25). (3) Running the capacitors at voltages above the nominal rated voltage will also results in significantly reduced life. (See chart G-2 on page 26). GTC 003- 02 / 10 www.justcapacitors.com 24 Gen Purpose AC Capacitors - GEM III Application Notes - 27L Series - 660 VAC Maximum Allowable Watts Loss ALLOWABLE WATTS LOSS - Natural Circulation Ambient Temperature (Degrees oC) - Natural Circulation Maximum Allowable Watts Loss ALLOWABLE WATTS LOSS - Forced Circulation Ambient Temperature (Degrees oC) - Forced Circulation GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III Application Data LIFE vs. TEMPERATURE % of Life CHART G-1 Temperature (Degrees oC) The above chart is intended as general reference only. Any indication of extended life by reducing temperature is in no way a guarantee of extended product life. GTC 003- 02 / 10 www.justcapacitors.com 25 Gen Purpose AC Capacitors - GEM III 26 Application Data LIFE vs. VOLTAGE % of Life CHART G-2 % of Rated Voltage The above chart is intended as general reference only. Any indication of extended life by reducing voltage is in no way a guarantee of extended product life. GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC Capacitors - GEM III Application Data % CAPACITANCE vs. TEMPERATURE % of Capacitance Change CHART E-3 Temperature (Degrees oC) GTC 003- 02 / 10 www.justcapacitors.com 27 Gen Purpose AC/DC Capacitors - GEM III 28 1000 VDC Peak This series of GEM III - dual rated AC/DC Capacitors is designed specifically for applications such as AC/DC filters where harmonic frequencies greater than 60Hz are common. These capacitors are typically used in DC filters at voltages above those served by electrolytic type construction. Any questions regarding the suitability of a capacitor for a particular application may be referred to Regal-Beloit Engineers through contacting your Regal-Beloit sales representative. SPECIFICATIONS: Available Capacitance Range: 3 to 50F Capacitance Tolerance: 6% Capacitance Variation with Temperature: 5% from -40C to +70C Rated Voltage: See Rating Tables. Rating is the Max Peak DC Voltage. Ripple Voltage: The RMS ripple voltage should not exceed the following percentages of the rated voltage for these frequencies: Frequency 60 Hz 120 Hz 400 Hz 1,000 Hz 10,000 Hz % of Rated Voltage 44 30 12 8 0.6 Operating Temperature: -30C to +70C Storage Temperature: -55C to +70C Operating Life: 60,000 hours with 90% survival with proper derating. Dissipation Factor: 0.3% maximum Case Material/Finish: Unpainted Aluminum Case, Tin Plated Steel Cover. Terminations: `Combo' terminal: 0.250" x 0.031" quick connect blades Dielectric Fluid: Dielektrol VI Internal Protection: UL recognized Pressure Sensitive Interrupter. See Ratings Table for Regal-Beloit's UL Code Number listed under Regal-Beloit's UL File E322597. For UL submittals with these capacitors, use the RBC `Pxxx' number not the Catalog Number. The corresponding generic UL designation that includes the Available Faults Current (AFC) rating is given below. All these capacitors are capable of interrupting available fault currents of up to 10,000 amperes. Case Style RBC Code Generic UL Code A P921 A10000AFC P P965 P10000AFC S P968 S10000AFC T P969 T10000AFC GTC 003- 02 / 10 www.justcapacitors.com Gen Purpose AC/DC Capacitors - GEM III 29 Single Ratings - 1 Section (440 VAC) 1000 VDC Peak Voltage Rating Capacitance (F) 3.0 4.0 5.0 6.0 7.5 10.0 Catalog Number 97F5437 97F5337 97F5339 97F5436 97F9036 97F5300 Case Style A A A A A A Base Size (in.) 1.25 1.25 1.25 1.25 1.25 1.25 Can Type Oval Oval Oval Oval Oval Oval Height C (in.) 2.12 2.88 2.88 2.88 3.88 3.88 12.5 15.0 17.5 20.0 25.0 30.0 35.0 40.0 45.0 50.0 97F5001 97F9037 97F9038 97F9039 97F9040 97F5023 97F9041 97F5116 97F5209 97F5211 P P P P P P S S T T 1.75 1.75 1.75 1.75 1.75 1.75 2.00 2.00 2.50 2.50 Round Round Round Round Round Round Round Round Round Round 2.88 2.88 3.88 3.88 4.75 4.75 4.75 4.75 3.88 3.88 Case Style P, S, and T Case Style A (4) .250 x .031 Blades per terminal (4) .250 x .031 Blades per terminal except (3) on case style P Case Style P S T K 1.75 2.00 2.50 J 1.88 2.12 2.62 *It is Regal-Beloit's goal to serve you with the most cost effective and highest quality capacitor designs. Standardization to the catalog type shown is a major program at Regal-Beloit. However, Regal-Beloit remains sensitive to your needs and requirements, and will continue to offer the above ratings (and more) in case configurations to meet your application(s). GTC 003- 02 / 10 www.justcapacitors.com Cross Reference 30 600 VAC 26F6600 Series to NEW 660 VAC 27L Series Catalog Number 26F6618 26F6619 26F6620 26F6621 26F6622 26F6623 26F6624 26F6625 26F6626 26F6627 26F6628 26F6629 26F6634 26F6665 26F6636 Case Style A A A A A A A A C C C C D D D Height Ht (in.) 2.12 2.12 2.38 3.12 3.50 4.25 4.50 5.50 3.88 4.50 5.50 6.75 6.25 7.25 8.00 Series Name (27L Series) Capacitance (F) 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 18.0 20.0 25.0 30.0 GEM III (26F Series) Film / Paper Series Name Capacitance (F) 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 18.0 20.0 25.0 30.0 Catalog Number 27L6095 27L6093 27L6094 27L6012 27L6013 27L6014 27L6015 27L6016 27L6017 27L6018 27L6073 27L6089 27L6082 27L6022 27L6023 Film / Paper (26F Series) Outline Height Ht (in.) 3.88 3.88 3.88 3.88 3.88 4.75 4.75 4.75 3.88 4.75 4.75 3.88 4.75 4.75 4.75 GEM III (27L Series) Outline Case Style A B C D GTC 003- 02 / 10 Case Style A A A A A A A A B B C D D D D a 2.16 2.69 2.91 3.66 b 1.31 1.56 1.91 1.97 d 0.81 0.81 0.81 0.81 www.justcapacitors.com UL Code P851 P851 P851 P851 P851 P851 P851 P851 P852 P852 P853 P854 P854 P854 P854 Cross Reference 31 600 VAC 61L Series to NEW 660 VAC 27L Series Catalog Number 61L1271 61L1280 61L1272 61L313 61L1273 61L1274 61L316 61L1275 61L1286 61L1276 61L1289 61L1277 61L322 61L323 61L324 Case Style A A A A A A A A B B B B C C D Height Ht (in.) 2.12 2.88 2.88 2.88 3.88 3.88 3.88 4.75 3.88 4.75 5.75 5.75 4.75 5.75 5.75 Series Name (27L Series) Capacitance (F) 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 18.0 20.0 25.0 30.0 GEM III GEM II (61L Series) Series Name Capacitance (F) 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 18.0 20.0 25.0 30.0 Catalog Number 27L6095 27L6093 27L6094 27L6012 27L6013 27L6014 27L6015 27L6016 27L6017 27L6018 27L6073 27L6089 27L6082 27L6022 27L6023 GEM II (61L Series) Outline Height Ht (in.) 3.88 3.88 3.88 3.88 3.88 4.75 4.75 4.75 3.88 4.75 4.75 3.88 4.75 4.75 4.75 GEM III (27L Series) Outline Case Style A B C D GTC 003- 02 / 10 Case Style A A A A A A A A B B C D D D D a 2.16 2.69 2.91 3.66 b 1.31 1.56 1.91 1.97 d 0.81 0.81 0.81 0.81 www.justcapacitors.com UL Code P851 P851 P851 P851 P851 P851 P851 P851 P852 P852 P853 P854 P854 P854 P854 Mounting Hardware 32 UNIVERSAL WRAP AROUND BRACKETS - Round Cases Case Style P S T Bracket Part Number M295A601631 M295A601632 M295A601633 a b c 1.75 2.00 2.50 1.12 1.25 1.50 1.31 1.44 1.69 UNIVERSAL WRAP AROUND BRACKETS - Oval Cases Case Style A B C D Bracket Part Number M128A2244AC21 M128A2244AB25 M128A2244AB22 M128A2244AB23 WRAP AROUND BRACKETS - Oval & Round Cases Case Style A B C D P S T Bracket Part Number M982706521 M982706531 M614A30161 M614A30151 M279A723524 M279A723522 M279A723523 GTC 003- 02 / 10 d e w t 2.56 3.06 3.31 4.06 2.50 2.75 3.25 2.94 3.50 3.81 4.56 2.88 3.12 3.62 0.50 0.63 0.75 0.75 0.75 0.75 0.75 0.02 0.02 0.03 0.03 0.04 0.04 0.04 www.justcapacitors.com d e 2.69 3.27 3.44 4.19 3.13 3.70 3.88 4.63 Mounting Hardware 33 UNIVERSAL WRAP AROUND BRACKETS - Round Cases Case Style P S T Bracket Part Number M295A601631 M295A601632 M295A601633 a b c 1.75 2.00 2.50 1.12 1.25 1.50 1.31 1.44 1.69 UNIVERSAL WRAP AROUND BRACKETS - Oval Cases Case Style A B C D Bracket Part Number M128A2244AC21 M128A2244AB25 M128A2244AB22 M128A2244AB23 WRAP AROUND BRACKETS - Oval & Round Cases Case Style A B C D P S T Bracket Part Number M982706521 M982706531 M614A30161 M614A30151 M279A723524 M279A723522 M279A723523 GTC 003- 02 / 10 d e w t 2.56 3.06 3.31 4.06 2.50 2.75 3.25 2.94 3.50 3.81 4.56 2.88 3.12 3.62 0.50 0.63 0.75 0.75 0.75 0.75 0.75 0.02 0.02 0.03 0.03 0.04 0.04 0.04 www.justcapacitors.com d e 2.69 3.27 3.44 4.19 3.13 3.70 3.88 4.63 Capacitor Label 34 11 2.0" 12 19 13 14 1 18 2 3 4 9 15 8 1.25" 5 6 7 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 10 16 17 Product / Brand Genteq Catalog Model Number Capacitance in Micro-Farads Tolerance UL Designation Including Available Fault Current (AFC) Rating Genteq Product Name of Dielectric Fluid Customer Part Number and Bar Code AC Voltage Rating Frequency Manufacturing WIP Job Number RoHS Compliant / No PCBs Statement RoHs Compliant Logo Self-Healing Symbol UL Approved Logo GTC 003- 02 / 10 15. 16. Data Matrix Bar Code Manufacturing Date Code Example: 09 Year (Last Digits of Year) 17. 18. 19. 38 Fiscal Week Label Sequence Number Country of Origin Label Part Number (Internal) www.justcapacitors.com Other Available Catalogs Publication 35 AVAILABLE REGAL-BELOIT COMPONENT CAPACITOR PUBLICATIONS Description Replaces GTC-001 AC Capacitors for Motor Run Applications CPD-510 GTC-002 AC Capacitors for HID Lighting Applications CPD-511 GTC-003 Capacitors for AC and DC General Purpose Applications CPD-512 GTC-004 Screw Terminal Electrolytic Capacitors CPD-517 GTC-005 Snubber, High Current DC, and Switching Capacitors CPD-518, 519, 520 GTC-006 Dry Capacitors New Pub. GTC-007 Snap-In Electrolytic Capacitors New Pub. PLC-001 PROLINE Capacitors New Pub. Please contact JustCapacitors.com for additional information. Call or write directly to: a Division of Airstar Solutions, Inc. PO Box 276222 Boca Raton , FL 33427 USA Phone: (561) 989-8080 (561) 989-8101 Fax: Email: info@airstarsoltions.com GTC 003- 02 / 10 www.justcapacitors.com Just Capacitors PO BOX 276222, Boca Raton , Florida 33427 USA (561) (561) 989-8101 Email: info@justcapacitors.com GTC Phone: - 02 / 10989-8080 Fax: www.genteqcapacitors.com www.justcapacitors.com