DS019 (v1.6) April 8, 2003 www.xilinx.com 1
Product Specification 1-800-255-7778
© 2003 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and further disclaimers are as listed at http://www.xilinx.com/legal.htm. All other
trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.
NOTICE OF DISCLAIMER: Xilinx is providing this design, code, or information "as is." By providing the design, code, or information as one possible implementation of this feature,
application, or standard, Xilinx makes no representation that this implementation is free from any claims of infringement. You are responsible for obtaining any rights you may
require for your implementation. Xilinx expressly disclaims any warranty whatsoever with respect to the adequacy of the implementation, including but not limited to any warranties
or representations that this implementation is free from claims of infringement and any implied warranties of merchantability or fitness for a particular purpose.
Device and Package Support
XC1700 Serial PROMs
XC18V00 ISP PROMs
XC9500/XL CPLDs
Supports all Xilinx package types
Programmer Accessories
Universal power supply
Power cord options for US, Asia, UK, European and
Japanese standards
Serial download cable and adapters
Users manual
Programmer interface software
Vacuum handling tool
Interface Software and System
Requirements
The programmer software operates on a Windows 32-bit plat-
form. Table 1 indicates the minimum system requirements
for each. In all cases, a CD-ROM drive and an RS-232 serial port
are required. A mouse is recommended.
Programmer Functional Specifications
Device programming, erasing, and verification
CPLD security control
Serial PROM reset polarity control
Checksum calculation and comparison
Blank check and signature ID tests
Master device upload
File transfer and comparison
Self check and auto calibration
Programming Socket Adapters
Supports all package styles: PLCC, PQFP, TQFP, VQFP,
HQFP, BGA, SOIC, VOIC, CSP and DIP.
Purchase as needed for specific package support.
Electrical Requirements and Physical
Specifications
Operating voltage: 100-250 VAC, 50-60 Hz
Power consumption: 0.5 Amp
Dimensions: 6" x 8" x 2" programmer, 3" x 5" x 1.75"power
supply
Weight: 1.2 lb. programmer, 1.3 lb. power supply
Safety standards: approved by UL, CSA, TUV, CE
New Programming Algorithm Support
The new programmer algorithms are available via the Xilinx
Web site. To access programmer software from the Xilinx
Web site, go to: http://www.xilinx.com.
The URL for the index of HW-130 software can be found at:
www.xilinx.com/techdocs/htm_index/sw_programmer.htm
Ordering Information
0
0
HW-130 Programmer
DS019 (v1.6) April 8, 2003 00Product Specification
R
Table 1: Interface Software and System Requirements
Requirements
Windows
95
Windows
98
Windows
NT
Memory 8 MB 16 MB 16 MB
Hard Disk
Space
15 MB 15 MB 15MB
HW-130 Host
Software
4.00 or
greater
4.10 or
greater
3.1 or
greater
Part Part No.
HW-130 Programmer for USA/Asia HW-130-US
HW-130 Programmer for Europe HW-130-EC
HW-130 Programmer for United Kingdom HW-130-UK
HW-130 Programmer for Japan HW-130-J
ds019_1_6.fm Page 1 Tuesday, April 8, 2003 4:07 PM
HW-130 Programmer
2www.xilinx.com DS019 (v1.6) April 8, 2003
1-800-255-7778 Product Specification
R
Adapter Selection
Revision History
The following table shows the revision history for this document.
Product Family Package Types
Adapter
P/N
XC9500/XL PLCC44 HW-133-PC44
XC9500 VQFP 44 HW-133-VQ44
XC9500/XL CSP 48 HW-133-CS48
XC9500XL VQFP 64 HW-133-VQ64
XC9500 PLCC 84 HW-133-PC84
XC9500 PQFP 100 HW-133-PQ100
XC9500/XL TQFP 100 HW-133-TQ100
XC9500XL CSP 144 HW-133-CS144
XC9500XL TQFP 144 HW-133-TQ144
XC9500(1) PQFP 160 HW-133-PQ160
XC9500/XL PQFP/HQFP 208 HW-133-HQ208
XC9500/XL BGA 352 HW-133-BG352
XC1700 & XC17S00 DIP 8 HW-137-DIP8
XC1700 & XC17S00 PLCC20/SO8/VO8 HW-137-PC20/SO8
XC1700 & XC17S00 SO20 HW-137-SO20
XC1700 PLCC 44/VQFP 44 HW-137-PLCC44/VQ44
XC18V00 PLCC 44/VQFP 44 HW-137-PLCC44/VQ44
XC18V00 PLCC 20/SOIC 20 HW-137-PC20/S020
Calibration Adapter HW-130-CAL
Notes:
1. Xilinx has manufactured two versions of the HW-133-PQ160 adapter. The current and correct adapter for
programming XC9500 devices has CPLD written on the front label, at the top left side, under the Xilinx logo.
Date Version Revision
6/13/98 1.3 Added Windows 98 system requirements, added HW-137-LCC44/VQ44 to Adapter
Selection table.
11/2798 1.4 Removed DOS and Windows 3.1 support. Revised the physical specifications to include the power
supply dimensions and weight. Removed the obsolete XC7200/7300 product families. Added package
adapters for the XC9500/XL series in CSP 48, VQFP 64, CSP and TQFP 144 packages.
01//13/00 1.5 Added DS number, and XC1800 Serial PROM adapters. Added version column to revision
control table.
04/08/03 1.6 Changed XC1800 Serial PROM to XC18V00 ISP PROM. Updated the template. Added
Ordering Information.
ds019_1_6.fm Page 2 Tuesday, April 8, 2003 4:07 PM
HW-130 Programmer
DS019 (v1.6) April 8, 2003 www.xilinx.com 3
Product Specification 1-800-255-7778
R
ds019_1_6.fm Page 3 Tuesday, April 8, 2003 4:07 PM