BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP RADIAL EPOXY LACQUERED TYPE PITCH 10/15/22.5/27.5 mm PITCH 7.5 mm (bent back leads) 296x12(full_width) P(bent back leads) = 7.5 mm P = 10 mm P = 15 - 22.5 -27.5 mm CBA951 Fig.1 Simplified outlines. FEATURES * 10 to 27.5 mm lead pitch * Supplied loose in box and taped on reel. QUICK REFERENCE DATA DESCRIPTION Capacitance range (E24 series) 0.002 to 3.9 F Capacitance tolerance 5% Rated (DC) voltage 160 V; 250 V; 400 V; 630 V; 1000 V; 1250 V;1600 V; 2000 V; 2500 V Rated (AC) voltage 100 V; 160 V; 200 V; 200 V; 350 V; 440 V; 550 V; 700 V; 900 V Rated peak-to-peak voltage 280 V; 450 V; 560 V; 560 V; 1000 V; 1250 V; 1600 V; 2000 V; 2500 V Climatic category 55/105/56 Rated temperature (DC) 85 C Rated temperature (AC) 85 C APPLICATIONS * Low losses due to low contact resistance and low loss dielectric result in applications where high currents at high frequency occur or high stability is preferred * Typical for S-correction in TV-sets and monitor * Their small dimensions make them suitable for circuits with high packaging density. DETAIL SPECIFICATION Maximum application temperature 105 C Reference specification IEC 60384-17 Performance grade grade 1 (long life) Stability grade grade 2 For more detailed data and test requirements see "Type detail specification HQN-384-17/105". 1999 Apr 29 VALUE 477 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES MULTIPLIER (nF) 15.0/7.5 mm 479 10.0 mm 0.1 2 15.0 mm 1 3 10 4 100 5 22.5 mm CAPACITANCE 27.5 mm (numerically) Example: 104 = 10 x 10 = 100 nF 2222 479 XX XX X 250 V TYPE PACKAGING C-TOL 160 V 250 V monitor type 400 V monitor type lead length 5.0 mm 5% 32 42 41 52 51 lead length 3.5 mm 5% 34 44 43 54 53 taped on reel H = 16.0 mm; P0 = 12.7 mm 5% 35 45 47 55 57 taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm 5% 36 46 49 56 59 loose in box 479 1999 Apr 29 LEAD CONFIGURATION 400 V 478 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 TYPE AND PITCHES MULTIPLIER (nF) 15.0/7.5 mm 479 10.0 mm 0.1 2 15.0 mm 1 3 10 4 100 5 22.5 mm CAPACITANCE 27.5 mm (numerically) Example: 104 = 10 x 10 = 100 nF 2222 TYPE PACKAGING loose in box 479 479 XX XX X LEAD CONFIGURATION C-TOL 630 V 1000 V 1250 V 1600 V 2000 V 2500 V lead length 5.0 mm 5% 62 72 82 02 12 22 lead length 3.5 mm 5% 64 74 84 04 14 24 taped on reel H = 16.0 mm; P0 = 12.7 mm 5% 65 75 85 05 15 25 taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm 5% 66 76 86 06 16 - 1999 Apr 29 479 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 10/15 mm PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. CBA818 Fig.4 Outline. Specific reference data for the 160 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C = 0.075 F 0.075 F < C 0.11 F 0.11 F < C 0.18 F 0.18 F < C 0.3 F 0.3 F < C 0.39 F 0.39 F < C 0.56 F 0.56 F < C 0.68 F 0.68 F < C 0.75 F Rated voltage pulse slope (dU/dt)R at 160 V (DC): P = 10 mm P = 15 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC)voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 20 x 10-4 25 x 10-4 30 x 10-4 35 x 10-4 40 x 10-4 45 x 10-4 50 x 10-4 55 x 10-4 60 V/s 50 V/s >100000 M >100000 M >220 V 256 V; 1 minute 2840 V; 1 minute Available 160 V DC versions PACKAGING(1) C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 Loose in box 5% 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 32... 2222 479 34... 2222 479 35... 2222 479 36... ORDERING preferred on request on request preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 480 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 160 V; URac = 100 V/Up-p = 280 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.075 2222 479 32753 2222 479 32823 0.082 0.091 2222 479 32913 2222 479 32104 6.0 x 15.0 x 12.5 0.9 0.1 0.11 2222 479 32114 not available 0.12 2222 479 32124 0.13 2222 479 32134 2222 479 32154 0.15 6.5 x 15.5 x 12.5 1.0 0.16 2222 479 32164 Pitch = 15.0 0.4 mm (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 2222 479 32184 .. 36184 0.18 6.0 x 15.0 (16.5) x 17.5 1.2 0.20 2222 479 32204 .. 36204 6.5 x 15.5 (17.0) x 17.5 1.3 2222 479 32224 .. 36224 0.22 0.24 2222 479 32244 .. 36244 2222 479 32274 .. 36274 0.27 0.30 2222 479 32304 .. 36304 7.0 x 16.0 (17.5) x 17.5 1.4 0.33 2222 479 32334 .. 36334 0.36 2222 479 32364 .. 36364 0.39 2222 479 32394 .. 36394 0.43 2222 479 32434 .. 36434 7.5 x 16.5 (18.0) x 17.5 1.5 2222 479 32474 .. 36474 0.47 0.51 2222 479 32514 .. 36514 8.0 x 17.0 (18.5) x 17.5 1.6 2222 479 32564 .. 36564 0.56 0.62 8.5 x 17.5 (19.0) x 17.5 1.7 2222 479 32624 .. 36624 2222 479 32684 .. 36684 0.68 9.0 x 18.0 (19.5) x 17.5 1.8 0.75 9.5 x 18.5 (20.0) x 17.5 1.9 2222 479 32754 .. 36754 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 481 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt A P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Odt CBA355 Fig.5 Outline. Specific reference data for the 160 V DC capacitors DESCRIPTION VALUE at 10 kHz at 100 kHz Tangent of loss angle: C = 0.82 F 10 x 10-4 55 x 10-4 -4 0.82 F < C 0.91 F 10 x 10 60 x 10-4 -4 0.91 F < C 1.0 F 10 x 10 65 x 10-4 -4 1.0 F < C 1.2 F 10 x 10 70 x 10-4 -4 1.2 F < C 1.3 F 10 x 10 75 x 10-4 -4 1.3 F < C 1.5 F 10 x 10 80 x 10-4 1.5 F < C 1.6 F 10 x 10-4 85 x 10-4 1.6 F < C 1.8 F 10 x 10-4 90 x 10-4 Rated voltage pulse slope (dU/dt)R at 160 V (DC): P = 22.5 mm 25 V/s R between leads, for C 1 F at 100 V; 1 minute RC between leads, for C >1 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case DESCRIPTION VALUE at 10 kHz at 100 kHz Tangent of loss angle: 1.8 F < C 2.0 F 10 x 10-4 95 x 10-4 -4 2.0 F < C 2.2 F 10 x 10 100 x 10-4 -4 2.2 F < C 2.4 F 15 x 10 105 x 10-4 -4 2.4 F < C 2.7 F 15 x 10 110 x 10-4 -4 2.7 F < C 3.0 F 15 x 10 115 x 10-4 -4 3.0 F < C 3.3 F 15 x 10 125 x 10-4 3.3 F < C 3.6 F 15 x 10-4 130 x 10-4 3.6 F < C 3.9 F 15 x 10-4 135 x 10-4 Rated voltage pulse slope (dU/dt)R at 160 V (DC): P = 27.5 mm 15 V/s >100000 M >100000 s >100000 M >220 V 256 V; 1 minute 2840 V; 1 minute Available 160 V DC versions PACKAGING(1) Loose in box Taped on reel DIMENSIONS C-tol lt = 5.0 1.0 mm lt = 3.5 0.5 mm H = 16.0 mm; P0 = 12.7 mm; note 2 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 32... 2222 479 34... 2222 479 35... ORDERING preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 482 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 160 V; URac = 100 V/Up-p = 280 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.82 7.0 x 20.0 x 26.0 1.8 0.91 7.5 x 20.5 x 26.0 1.9 1.1 8.0 x 21.0 x 26.0 2.0 1.2 8.5 x 21.5 x 26.0 2.1 9.5 x 22.5 x 26.0 2.4 10.0 x 23.0 x 26.0 2.5 1 1.3 1.5 1.6 1.8 2222 479 32824 2222 479 32914 2222 479 32105 2222 479 32115 2222 479 32125 2222 479 32135 2222 479 32155 2222 479 32165 2222 479 32185 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 2 10.0 x 23.0 x 30.0 5.0 2222 479 32205 2.2 10.5 x 23.5 x 30.0 5.0 2222 479 32225 2.4 11.0 x 24.0 x 30.0 5.5 2222 479 32245 2.7 11.5 x 24.5 x 30.0 5.5 2222 479 32275 3 12.0 x 25.0 x 30.0 6.0 2222 479 32305 3.3 13.0 x 26.0 x 30.0 6.5 2222 479 32335 3.6 13.5 x 26.5 x 30.0 7.0 2222 479 32365 3.9 14.0 x 27.0 x 30.0 7.0 2222 479 32395 Note 1. The shading indicates preferred types. 1999 Apr 29 483 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 10/15 mm PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. 15 CBA818 Fig.6 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.047 F < C 0.075 F 0.075 F < C 0.11 F 0.11 F < C 0.18 F 0.18 F < C 0.3 F 0.3 F < C 0.39 F 0.39 F < C 0.47 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 10.0 mm P = 15.0 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 20 x 10-4 25 x 10-4 30 x 10-4 35 x 10-4 40 x 10-4 45 x 10-4 70 V/s 60 V/s >100000 M >100000 M >220 V 400 V; 1 minute 2840 V; 1 minute Available 250 V DC versions PACKAGING(1) C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 Loose in box 5% 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 42... 2222 479 44... 2222 479 45... 2222 479 46... ORDERING preferred on request on request preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 484 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 250 V; URac = 160 V/Up-p = 450 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1/-0.5 mm 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 6.0 x 15.0 x 12.5 0.9 6.5 x 15.5 x 12.5 1.0 2222 479 42473 2222 479 42513 2222 479 42563 2222 479 42623 2222 479 42683 2222 479 42753 2222 479 42823 2222 479 42913 2222 479 42104 not available Pitch = 15.0 0.4 mm; (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.11 0.12 0.13 0.15 0.16 0.18 0.20 0.22 0.24 0.27 0.30 0.33 0.36 0.39 0.43 0.47 6.5 x 15.5 (17.0) x 17.5 1.3 7.0 x 16.0 (17.5) x 17.5 1.4 7.5 x 16.5 (18.0) x 17.5 1.5 8.0 x 17.0 (18.5) x 17.5 1.6 8.5 x 17.5 (19.0) x 17.5 1.7 9.0 x 18.0 (19.5) x 17.5 9.5 x 18.5 (20.0) x 17.5 1.8 1.9 2222 479 42114 2222 479 42124 2222 479 42134 2222 479 42154 2222 479 42164 2222 479 42184 2222 479 42204 2222 479 42224 2222 479 42244 2222 479 42274 2222 479 42304 2222 479 42334 2222 479 42364 2222 479 42394 2222 479 42434 2222 479 42474 .. 46114 .. 46124 .. 46134 .. 46154 .. 46164 .. 46184 .. 46204 .. 46224 .. 46244 .. 46274 .. 46304 .. 46334 .. 46364 .. 46394 .. 46434 .. 46474 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 485 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt A P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Odt CBA355 Fig.7 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: 0.51 F < C 0.56 F 0.56 F < C 0.68 F 0.68 F < C 0.82 F 0.82 F < C 0.91 F 0.91 F < C 1.0 F 1.0 F < C 1.2 F 1.2 F < C 1.3 F VALUE at 10 kHz at 100 kHz 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 45 x 10-4 50 x 10-4 55 x 10-4 60 x 10-4 65 x 10-4 70 x 10-4 75 x 10-4 Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 22.5 mm 30 V/s R between leads, for C 1 F at 100 V; 1 minute RC between leads, for C >1 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case DESCRIPTION VALUE at 10 kHz at 100 kHz Tangent of loss angle: 1.3 F < C 1.5 F 10 x 10-4 80 x 10-4 -4 1.5 F < C 1.6 F 10 x 10 85 x 10-4 -4 1.6 F < C 1.8 F 10 x 10 90 x 10-4 -4 1.8 F < C 2.0 F 10 x 10 95 x 10-4 2.0 F < C 2.2 F 10 x 10-4 100 x 10-4 2.2 F < C 2.4 F 15 x 10-4 105 x 10-4 2.4 F < C 2.7 F 15 x 10-4 110 x 10-4 2.7 F < C 3 F 15 x 10-4 115 x 10-4 Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 27.5 mm 20 V/s >100000 M >100000 s >100000 M >220 V 400 V; 1 minute 2840 V; 1 minute Available 250 V DC versions PACKAGING(1) Loose in box Taped on reel C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm H = 16.0 mm; P0 = 12.7 mm; note 2 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 42... 2222 479 44... 2222 479 45... ORDERING preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 486 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 250 V; URac = 160 V/Up-p = 450 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.51 0.56 0.62 0.68 7.0 x 20.0 x 26.0 1.8 7.5 x 20.5 x 26.0 1.9 2222 479 42514 2222 479 42564 2222 479 42624 2222 479 42684 0.75 8.0 x 21.0 x 26.0 2.0 2222 479 42754 0.82 8.5 x 21.5 x 26.0 2.1 2222 479 42824 0.91 9.0 x 22.0 x 26.0 2.4 2222 479 42914 1.0 9.5 x 22.5 x 26.0 2.5 2222 479 42105 1.1 10.0 x 23.0 x 26.0 2.6 2222 479 42115 1.2 10.5 x 23.5 x 26.0 2.7 2222 479 42125 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 1.3 10.0 x 23.0 x 30.0 5.0 2222 479 42135 1.5 10.5 x 23.5 x 30.0 5.0 2222 479 42155 1.6 11.0 x 24.0 x 30.0 5.5 2222 479 42165 1.8 11.5 x 24.5 x 30.0 5.5 2222 479 42185 2.0 12.5 x 25.5 x 30.0 6.5 2222 479 42205 2.2 13.0 x 26.0 x 30.0 6.5 2222 479 42225 2.4 13.5 x 26.5 x 30.0 7.0 2222 479 42245 2.7 14.0 x 27.0 x 30.0 7.0 2222 479 42275 3.0 15.0 x 28.0 x 30.0 7.5 2222 479 42305 Note 1. The shading indicates preferred types. 1999 Apr 29 487 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 10/15 mm PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm F = 7.5 +0.6/-0.1 mm CBA818 Fig.8 Outline. Specific reference data for the 250 V DC capacitors (monitor type) VALUE DESCRIPTION Tangent of loss angle: 0.022 F < C 0.027 F 0.027 F < C 0.075 F 0.075 F < C 0.11 F 0.11 F < C 0.18 F 0.18 F < C 0.22 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 10.0 mm P = 15.0 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 5 x 10-4 10 x 10-4 10 x 10-4 15 x 10-4 20 x 10-4 25 x 10-4 30 x 10-4 35 x 10-4 160 V/s 140 V/s >100000 M >100000 M >220 V 400 V; 1 minute 2840 V; 1 minute Available 250 V DC versions (monitor type) PACKAGING(1) C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 Loose in box 5% 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 41... 2222 479 43... 2222 479 47... 2222 479 49... ORDERING preferred on request on request preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 488 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 250 V; URac = 160 V/Up-p = 450 V (monitor type) CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1/-0.5 mm 0.022 0.024 0.027 0.03 0.033 0.036 0.039 0.043 0.047 r o it n o M 6.0 x 15.0 x 12.5 2222 479 41223 2222 479 41243 2222 479 41273 2222 479 41303 2222 479 41333 2222 479 41363 2222 479 41393 2222 479 41433 2222 479 41473 0.9 not available Pitch = 15.0 0.4 mm (Pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 0.16 0.18 0.2 0.22 6.5 x 15.5 (17.0) x 17.5 r o t 7.0 x 16.0 (17.5) x 17.5 i n o 7.5 x 16.5 (18.0) x 17.5 2222 479 41513 2222 479 41563 2222 479 41623 2222 479 41683 2222 479 41753 2222 479 41823 2222 479 41913 2222 479 41104 2222 479 41114 2222 479 41124 2222 479 41134 2222 479 41154 2222 479 41164 2222 479 41184 2222 479 41204 2222 479 41224 1.3 1.4 1.5 8.0 x 17.0 (18.5) x 17.5 M 1.6 8.5 x 17.5 (19.0) x 17.5 1.7 9.0 x 18.0 (19.5) x 17.5 1.8 .. 49513 .. 49563 .. 49623 .. 49683 .. 49753 .. 49823 .. 49913 .. 49104 .. 49114 .. 49124 .. 49134 .. 49154 .. 49164 .. 49184 .. 49204 .. 49224 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 489 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. A P Odt CBA355 Fig.9 Outline. Specific reference data for the 250 V DC capacitors (monitor type) VALUE DESCRIPTION Tangent of loss angle: 0.24 F < C 0.3 F 0.3 F < C 0.39 F 0.39 F < C 0.56 F 0.56 F < C 0.68 F 0.68 F < C 0.82 F 0.82 F < C 0.91 F 0.91 F < C 1.0 F 1.0 F < C 1.2 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 1.0 F at 100 V; 1 minute RC between leads, for C > 1.0 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 35 x 10-4 40 x 10-4 45 x 10-4 50 x 10-4 55 x 10-4 60 x 10-4 65 x 10-4 70 x 10-4 70 V/s 50 V/s >100000 M >100000 s >100000 M >220 V 400 V; 1 minute 2840 V; 1 minute Available 250 V DC versions (monitor type) PACKAGING(1) Loose in box Taped on reel C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm H = 16.0 mm; P0 = 12.7 mm; note 2 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 41... 2222 479 43... 2222 479 47... ORDERING preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 490 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 250 V; URac = 160 V/Up-p = 450 V (monitor type) CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.24 6.5 x 19.5 x 26.0 1.7 2222 479 41244 0.27 7.0 x 20.0 x 26.0 1.8 2222 479 41274 0.3 7.5 x 20.5 x 26.0 0.33 r o t ni 2222 479 41304 1.9 2222 479 41334 0.36 8.0 x 21.0 x 26.0 2.0 0.39 8.5 x 21.5 x 26.0 2.1 9.0 x 22.0 x 26.0 2.4 2222 479 41474 9.5 x 22.5 x 26.0 2.5 2222 479 41514 10.0 x 23.0 x 26.0 2.6 2222 479 41564 10.5 x 23.5 x 26.0 2.7 2222 479 41624 0.43 0.47 0.51 0.56 0.62 o M 2222 479 41364 2222 479 41394 2222 479 41434 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.68 10.0 x 23.0 x 30.0 5.0 2222 479 41684 0.75 10.5 x 23.5 x 30.0 5.0 2222 479 41754 0.82 11.0 x 24.0 x 30.0 5.5 2222 479 41824 0.91 11.5 x 24.5 x 30.0 5.5 2222 479 41914 12.0 x 25.0 x 30.0 6.0 2222 479 41105 12.5 x 25.5 x 30.0 6.5 2222 479 41115 13.0 x 26.0 x 30.0 6.5 2222 479 41125 1.0 1.1 1.2 r o t ni o M Note 1. The shading indicates preferred types. 1999 Apr 29 491 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 10/15 mm PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. CBA818 Fig.10 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.022 F < C 0.027 F 0.027 F < C 0.075 F 0.075 F < C 0.11 F 0.11 F < C 0.18 F 0.18 F < C 0.22 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 10.0 mm P = 15.0 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 5 x 10-4 10 x 10-4 10 x 10-4 15 x 10-4 20 x 10-4 25 x 10-4 30 x 10-4 35 x 10-4 80 V/s 70 V/s >100000 M >100000 M >220 V 640 V; 1 minute 2840 V; 1 minute Available 400 V DC versions PACKAGING(1) C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 Loose in box 5% 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 52... 2222 479 54... 2222 479 55... 2222 479 56... ORDERING preferred on request on request preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 492 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 400 V; URac = 200 V/Up-p = 560 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1/-0.5 mm 0.022 0.024 0.027 0.03 0.033 0.036 0.039 0.043 0.047 6.0 x 15.0 x 12.5 2222 479 52223 2222 479 52243 2222 479 52273 2222 479 52303 2222 479 52333 2222 479 52363 2222 479 52393 2222 479 52433 2222 479 52473 0.9 not available Pitch = 15.0 0.4 mm; (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 0.16 0.18 0.2 0.22 6.5 x 15.5 (17.0) x 17.5 1.3 7.0 x 16.0 (17.5) x 17.5 1.4 7.5 x 16.5 (18.0) x 17.5 1.5 8.0 x 17.0 (18.5) x 17.5 1.6 8.5 x 17.5 (19.0) x 17.5 1.7 9.0 x 18.0 (19.5) x 17.5 1.8 2222 479 52513 2222 479 52563 2222 479 52623 2222 479 52683 2222 479 52753 2222 479 52823 2222 479 52913 2222 479 52104 2222 479 52114 2222 479 52124 2222 479 52134 2222 479 52154 2222 479 52164 2222 479 52184 2222 479 52204 2222 479 52224 .. 56513 .. 56563 .. 56623 .. 56683 .. 56753 .. 56823 .. 56913 .. 56104 .. 56114 .. 56124 .. 56134 .. 56154 .. 56164 .. 56184 .. 56204 .. 56224 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 493 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt A P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Odt CBA355 Fig.11 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.24 F < C 0.3 F 0.3 F < C 0.39 F 0.39 F < C 0.56 F 0.56 F < C 0.68 F 0.68 F < C 0.82 F 0.82 F < C 0.91 F 0.91 F < C 1.0 F 1.0 F < C 1.2 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 1.0 F at 100 V; 1 minute RC between leads, for C > 1.0 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 35 x 10-4 40 x 10-4 45 x 10-4 50 x 10-4 55 x 10-4 60 x 10-4 65 x 10-4 70 x 10-4 35 V/s 25 V/s >100000 M >100000 s >100000 M >220 V 640 V; 1 minute 2840 V; 1 minute Available 400 V DC versions PACKAGING(1) Loose in box Taped on reel C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm H = 16.0 mm; P0 = 12.7 mm; note 2 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 52... 2222 479 54... 2222 479 55... ORDERING preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 494 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 400 V; URac = 200 V/Up-p = 450 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.24 6.5 x 19.5 x 26.0 1.7 2222 479 52244 0.27 7.0 x 20.0 x 26.0 1.8 2222 479 52274 0.3 7.5 x 20.5 x 26.0 1.9 0.36 8.0 x 21.0 x 26.0 2.0 0.39 8.5 x 21.5 x 26.0 2.1 0.47 9.0 x 22.0 x 26.0 2.4 2222 479 52474 0.51 9.5 x 22.5 x 26.0 2.5 2222 479 52514 0.56 10.0 x 23.0 x 26.0 2.6 2222 479 52564 0.62 10.5 x 23.5 x 26.0 2.7 2222 479 52624 0.33 0.43 2222 479 52304 2222 479 52334 2222 479 52364 2222 479 52394 2222 479 52434 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.68 10.0 x 23.0 x 30.0 5.0 2222 479 52684 0.75 10.5 x 23.5 x 30.0 5.0 2222 479 52754 0.82 11.0 x 24.0 x 30.0 5.5 2222 479 52824 0.91 11.5 x 24.5 x 30.0 5.5 2222 479 52914 1.0 12.0 x 25.0 x 30.0 6.0 2222 479 52105 1.1 12.5 x 25.5 x 30.0 6.5 2222 479 52115 1.2 13.0 x 26.0 x 30.0 6.5 2222 479 52125 Note 1. The shading indicates preferred types. 1999 Apr 29 495 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 10/15 mm PITCH 7.5 mm (bent back leads) l ook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. CBA818 Fig.12 Outline. Specific reference data for the 400 V DC capacitors (monitor type) VALUE DESCRIPTION Tangent of loss angle: 0.01 F < C 0.027 F 0.027 F < C 0.075 F 0.075 F < C 0.11 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 10.0 mm P = 15.0 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 5 x 10-4 15 x 10-4 20 x 10-4 25 x 10-4 200 V/s 180 V/s >100000 M >100000 M >220 V 640 V; 1 minute 2840 V; 1 minute Available 400 V DC versions (monitor type) PACKAGING(1) C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 Loose in box 5% 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 51... 2222 479 53... 2222 479 57... 2222 479 59... Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 496 ORDERING preferred on request on request preferred BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 400 V; URac = 200 V/Up-p = 560 V (monitor type) CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1/-0.5 mm 0.01 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 0.024 0.027 r o it 6.0 x 15.0 x 12.5 n o M 0.9 6.5 x 15.5 x 12.5 1.0 2222 479 51103 2222 479 51113 2222 479 51123 2222 479 51133 2222 479 51153 2222 479 51163 2222 479 51183 2222 479 51203 2222 479 51223 2222 479 51243 2222 479 51273 not available Pitch = 15.0 0.4 mm; (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.03 0.033 0.036 0.039 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 6.5 x 15.5 (17.0) x 17.5 r o it 1.3 7.0 x 16.0 (17.5) x 17.5 7.5 x 16.5 (18.0) x 17.5 on 1.4 1.5 8.0 x 17.0 (18.5) x 17.5 1.6 8.5 x 17.5 (19.0) x 17.5 9.0 x 18.0 (19.5) x 17.5 9.5 x 18.5 (20.0) x 17.5 1.7 1.8 1.9 M 2222 479 51303 2222 479 51333 2222 479 51363 2222 479 51393 2222 479 51433 2222 479 51473 2222 479 51513 2222 479 51563 2222 479 51623 2222 479 51683 2222 479 51753 2222 479 51823 2222 479 51913 2222 479 51104 2222 479 51114 .. 59303 .. 59333 .. 59363 .. 59393 .. 59433 .. 59473 .. 59513 .. 59563 .. 59623 .. 59683 .. 59753 .. 59823 .. 59913 .. 59104 .. 59114 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 497 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt A P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Odt CBA355 Fig.13 Outline. Specific reference data for the 400 V DC capacitors (monitor type) VALUE DESCRIPTION Tangent of loss angle: 0.12 F < C 0.18 F 0.18 F < C 0.3 F 0.3 F < C 0.39 F 0.39 F < C 0.56 F 0.56 F < C 0.68 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 30 x 10-4 35 x 10-4 40 x 10-4 45 x 10-4 50 x 10-4 90 V/s 60 V/s >100000 M >100000 M >220 V 640 V; 1 minute 2840 V; 1 minute Available 400 V DC versions (monitor type) PACKAGING(1) Loose in box Taped on reel DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 5% 5% 2222 479 51... 2222 479 53... 2222 479 57... preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 498 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 400 V; URac = 200 V/Up-p = 560 V (monitor type) CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.12 6.5 x 19.5 x 26.0 1.7 0.13 7.0 x 20.0 x 26.0 1.8 0.15 0.16 r o t 7.5 x 20.5 x 26.0 1.9 i n o 2222 479 51124 2222 479 51134 2222 479 51154 2222 479 51164 0.18 8.0 x 21.0 x 26.0 2.0 2222 479 51184 0.20 8.5 x 21.5 x 26.0 2.1 2222 479 51204 0.22 9.0 x 22.0 x 26.0 2.4 9.5 x 22.5 x 26.0 2.5 2222 479 51274 10.0 x 23.0 x 26.0 2.7 2222 479 51304 0.24 0.27 0.30 M 2222 479 51224 2222 479 51244 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.33 9.5 x 22.5 x 30.0 5.0 2222 479 51334 0.36 10.0 x 22.5 x 30.0 5.0 2222 479 51364 0.39 10.5 x 23.0 x 30.0 5.0 2222 479 51394 0.43 11.0 x 23.0 x 30.0 5.5 2222 479 51434 0.47 11.5 x 24.5 x 30.0 5.5 2222 479 51474 0.51 12.0 x 25.0 x 30.0 6.0 2222 479 51514 13.0 x 26.0 x 30.0 6.5 2222 479 51564 13.5 x 26.5 x 30.0 6.5 2222 479 51624 14.0 x 27.0 x 30.0 7.0 2222 479 51684 0.56 0.62 0.68 r o it on M Note 1. The shading indicates preferred types. 1999 Apr 29 499 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 10/15 mm PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. CBA818 Fig.14 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.01 F < C 0.027 F 0.027 F < C 0.075 F 0.075 F < C 0.11 F Rated voltage pulse slope (dU/dt)R at 630 V (DC): P = 10.0 mm P = 15.0 mm R between leads, for C 1.0 F at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 5 x 10-4 15 x 10-4 20 x 10-4 25 x 10-4 100 V/s 90 V/s >100000 M >100000 M >220 V 1008 V; 1 minute 2840 V; 1 minute Available 630 V DC versions PACKAGING(1) C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 Loose in box 5% 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 62... 2222 479 64... 2222 479 65... 2222 479 66... Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 500 ORDERING preferred on request on request preferred BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 630 V; URac = 200 V/Up-p = 560 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1/-0.5 mm 0.01 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 0.024 0.027 6.0 x 15.0 x 12.5 0.9 6.5 x 15.5 x 12.5 1.0 2222 479 62103 2222 479 62113 2222 479 62123 2222 479 62133 2222 479 62153 2222 479 62163 2222 479 62183 2222 479 62203 2222 479 62223 2222 479 62243 2222 479 62273 not available Pitch = 15.0 0.4 mm; (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.03 0.033 0.036 0.039 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 6.5 x 15.5 (17.0) x 17.5 1.3 7.0 x 16.0 (17.5) x 17.5 7.5 x 16.5 (18.0) x 17.5 1.4 1.5 8.0 x 17.0 (18.5) x 17.5 1.6 8.5 x 17.5 (19.0) x 17.5 9.0 x 18.0 (19.5) x 17.5 9.5 x 18.5 (20.0) x 17.5 1.7 1.8 1.9 2222 479 62303 2222 479 62333 2222 479 62363 2222 479 62393 2222 479 62433 2222 479 62473 2222 479 62513 2222 479 62563 2222 479 62623 2222 479 62683 2222 479 62753 2222 479 62823 2222 479 62913 2222 479 62104 2222 479 62114 .. 66303 .. 66333 .. 66363 .. 66393 .. 66433 .. 66473 .. 66513 .. 66563 .. 66623 .. 66683 .. 66753 .. 66823 .. 66913 .. 66104 .. 66114 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 501 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt A P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Odt CBA355 Fig.15 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.12 F < C 0.18 F 0.18 F < C 0.3 F 0.3 F < C 0.39 F 0.39 F < C 0.56 F 0.56 F < C 0.68 F Rated voltage pulse slope (dU/dt)R at 630 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 1.0 F at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 30 x 10-4 35 x 10-4 40 x 10-4 45 x 10-4 50 x 10-4 45 V/s 30 V/s >100000 M >100000 M >220 V 1008 V; 1 minute 2840 V; 1 minute Available 630 V DC versions PACKAGING(1) Loose in box Taped on reel DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 5% 5% 2222 479 62... 2222 479 64... 2222 479 65... preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 502 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 630 V; URac = 200 V/Up-p = 560 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.12 6.5 x 19.5 x 26.0 1.7 2222 479 62124 0.13 7.0 x 20.0 x 26.0 1.8 2222 479 62134 0.15 7.5 x 20.5 x 26.0 1.9 0.18 8.0 x 21.0 x 26.0 2.0 2222 479 62184 0.20 8.5 x 21.5 x 26.0 2.1 2222 479 62204 0.22 9.0 x 22.0 x 26.0 2.4 0.27 9.5 x 22.5 x 26.0 2.5 2222 479 62274 0.30 10.0 x 23.0 x 26.0 2.7 2222 479 62304 0.16 0.24 2222 479 62154 2222 479 62164 2222 479 62224 2222 479 62244 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.33 9.5 x 22.5 x 30.0 5.0 2222 479 62334 0.36 10.0 x 22.5 x 30.0 5.0 2222 479 62364 0.39 10.5 x 23.0 x 30.0 5.0 2222 479 62394 0.43 11.0 x 23.0 x 30.0 5.5 2222 479 62434 0.47 11.5 x 24.5 x 30.0 5.5 2222 479 62474 0.51 12.0 x 25.0 x 30.0 6.0 2222 479 62514 0.56 13.0 x 26.0 x 30.0 6.5 2222 479 62564 0.62 13.5 x 26.5 x 30.0 6.5 2222 479 62624 0.68 14.0 x 27.0 x 30.0 7.0 2222 479 62684 Note 1. The shading indicates preferred types. 1999 Apr 29 503 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 15 mm PITCH 7.5 mm (bent back leads) l ook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 CBA818 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. Fig.16 Outline. Specific reference data for the 1000 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 Tangent of loss angle: C 0.039 F Rated voltage pulse slope (dU/dt)R at 1000 V (DC) 450 V/s R between leads, for C 1.0 F at 100 V; 1 minute >100000 M R between leads and case; 500 V; 1 minute >100000 M >440 V Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600 V; 1 minute Withstanding (DC)voltage between leads and case 2840 V; 1 minute Available 1000 V DC versions C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER lt = 5.0 1.0 mm 5% 2222 479 72... preferred lt = 3.5 0.5 mm 5% 2222 479 74... on request H = 16.0 mm; P0 = 12.7 mm; note 2 5% 2222 479 75... on request Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 5% 2222 479 76... preferred PACKAGING(1) Loose in box Taped on reel DIMENSIONS ORDERING Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 504 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 1000 V; URac = 350 V/Up-p = 1000 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) MASS (g) Pitch = 15.0 0.4 mm; (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.013(4) 0.015(4) 0.016(4) 0.018(4) 6.0 x 15.0 (16.5) x 17.5 1.2 6.5 x 15.5 (17.0) x 17.5 1.3 2222 479 72133 .. 76133 2222 479 72153 .. 76153 2222 479 72163 .. 76163 2222 479 72183 .. 76183 2222 479 72203 .. 76203 2222 479 72223 .. 76223 2222 479 72243 .. 76243 7.0 x 16.0 (17.5) x 17.5 1.4 7.5 x 16.5 (18.0) x 17.5 1.5 0.027(4) 8.0 x 17.0 (18.5) x 17.5 1.6 2222 479 72273 .. 76273 0.03(4) 8.5 x 17.5 (19.0) x 17.5 1.7 2222 479 72303 .. 76303 0.033(4) 9.0 x 18.0 (19.5) x 17.5 1.8 2222 479 72333 .. 76333 2222 479 72363 .. 76363 2222 479 72393 .. 76393 0.02(4) 0.022(4) 0.024(4) 0.036(4) 0.039(4) 9.5 x 18.5 (20.0) x 17.5 1.9 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 4. Under development. 1999 Apr 29 505 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt A P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Odt CBA355 Fig.17 Outline. Specific reference data for the 1000 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.039 F < C 0.1 F 0.1 F < C 0.15 F 0.15 F < C 0.22 F 0.22 F < C 0.27 F Rated voltage pulse slope (dU/dt)R at 1000 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC)voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 5 x 10-4 5 x 10-4 20 x 10-4 25 x 10-4 30 x 10-4 35 x 10-4 200 V/s 110 V/s >100000 M >100000 M >440 V 1600 V; 1 minute 2840 V; 1 minute Available 1000 V DC versions PACKAGING(1) Loose in box Taped on reel C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING lt = 5.0 1.0 mm 5% 2222 479 72... preferred lt = 3.5 0.5 mm 5% 2222 479 74... on request H = 16.0 mm; P0 = 12.7 mm; note 2 5% 2222 479 75... on request DIMENSIONS Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 506 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 1000 V; URac = 350 V/Up-p = 1000 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.043(2) 0.047(2) 0.051(2) 7.0 x 19.0 x 26.0 2222 479 72433 1.8 2222 479 72473 2222 479 72513 7.5 x 19.5 x 26.0 1.9 8.0 x 21.0 x 26.0 2.0 8.5 x 21.5 x 26.0 2.1 0.082(2) 9.0 x 22.0 x 26.0 2.3 2222 479 72823 0.091(2) 9.5 x 22.5 x 26.0 2.5 2222 479 72913 0.1(2) 10.0 x 23.0 x 26.0 2.6 2222 479 72104 0.11(2) 10.5 x 23.5 x 26.0 2.7 2222 479 72114 0.056(2) 0.062(2) 0.068(2) 0.075(2) 2222 479 72563 2222 479 72623 2222 479 72683 2222 479 72753 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.12(2) 9.5 x 22.5 x 31.0 5.0 2222 479 72124 0.13(2) 10.0 x 23.0 x 31.0 5.0 2222 479 72134 11.0 x 24.0 x 31.0 5.5 0.18(2) 12.0 x 25.0 x 31.0 6.0 2222 479 72184 0.20(2) 12.5 x 25.5 x 31.0 6.5 2222 479 72204 0.22(2) 13.0 x 26.0 x 31.0 6.5 2222 479 72224 0.24(2) 14.0 x 27.0 x 31.0 7.0 2222 479 72244 0.27(2) 14.5 x 27.5 x 31.0 7.5 2222 479 72274 0.15(2) 0.16(2) 2222 479 72154 2222 479 72164 Notes 1. The shading indicates preferred types. 2. Under development. 1999 Apr 29 507 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 15 mm PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 CBA818 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. Fig.18 Outline. Specific reference data for the 1250 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.024 F Rated voltage pulse slope (dU/dt)R at 1250 V (DC) R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC)voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 550 V/s >100000 M >100000 M >500 V 2000 V; 1 minute 2840 V; 1 minute Available 1250 V DC versions PACKAGING(1) C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 Loose in box 5% 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 82... 2222 479 84... 2222 479 85... 2222 479 86... ORDERING preferred on request on request preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 508 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 1250 V; URac = 440 V/Up-p = 1250 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) MASS (g) Pitch = 15.0 0.4 mm; (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.0082(4) 6.0 x 15.0 (16.5) x 17.5 1.2 0.0091(4) 0.01(4) 6.5 x 15.5 (17.0) x 17.5 1.3 0.011(4) 0.012(4) 0.013(4) 0.015(4) 0.016(4) 7.0 x 16.0 (17.5) x 17.5 1.4 7.5 x 16.5 (18.0) x 17.5 1.5 2222 479 82822 .. 86822 2222 479 82912 .. 86912 2222 479 82103 .. 86103 2222 479 82113 .. 86113 2222 479 82123 .. 86123 2222 479 82133 .. 86133 2222 479 82153 .. 86153 2222 479 82163 .. 86163 2222 479 82183 .. 86183 8.0 x 17.0 (18.5) x 17.5 1.6 0.02(4) 8.5 x 17.5 (19.0) x 17.5 1.7 2222 479 82203 .. 86203 0.022(4) 9.0 x 18.0 (19.5) x 17.5 1.8 2222 479 82223 .. 86223 0.024(4) 9.5 x 18.5 (20.0) x 17.5 1.9 2222 479 82243 .. 86243 0.018(4) Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 4. Under development. 1999 Apr 29 509 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 96x12(full_width) seating plane(1) h (2) lt A P Odt CBA355 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.19 Outline. Specific reference data for the 1250 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.024 F < C 0.068 F 0.068 F < C 0.1 F 0.1 F < C 0.18 F Rated voltage pulse slope (dU/dt)R at 1000 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC)voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 5 x 10-4 20 x 10-4 25 x 10-4 30 x 10-4 250 V/s 140 V/s >100000 M >100000 M >500 V 2000 V; 1 minute 2840 V; 1 minute Available 1250 V DC versions PACKAGING(1) Loose in box Taped on reel C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING lt = 5.0 1.0 mm 5% 2222 479 82... preferred lt = 3.5 0.5 mm 5% 2222 479 84... on request H = 16.0 mm; P0 = 12.7 mm; note 2 5% 2222 479 85... on request DIMENSIONS Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 510 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 1250 V; URac = 440 V/Up-p = 1250 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.027(2) 6.5 x 18.5 x 26.0 1.7 2222 479 82273 0.03(2) 7.0 x 19.0 x 26.0 1.8 2222 479 82303 7.5 x 19.5 x 26.0 1.9 8.0 x 21.0 x 26.0 2.0 0.047(2) 8.5 x 21.5 x 26.0 2.1 2222 479 82473 0.051(2) 9.0 x 22.0 x 26.0 2.3 2222 479 82513 0.056(2) 9.5 x 22.5 x 26.0 2.5 2222 479 82563 0.062(2) 10.0 x 23.0 x 26.0 2.6 2222 479 82623 0.068(2) 10.5 x 23.5 x 26.0 2.7 2222 479 82683 0.033(2) 0.036(2) 0.039(2) 0.043(2) 2222 479 82333 2222 479 82363 2222 479 82393 2222 479 82433 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.075(2) 9.5 x 22.5 x 31.0 5.0 2222 479 82753 0.082(2) 10.0 x 23.0 x 31.0 5.0 2222 479 82823 0.091(2) 10.5 x 23.5 x 31.0 5.5 2222 479 82913 0.1(2) 11.0 x 24.0 x 31.0 5.5 2222 479 82104 0.11(2) 11.5 x 24.5 x 31.0 6.0 2222 479 82114 0.12(2) 12.0 x 25.0 x 31.0 6.0 2222 479 82124 0.13(2) 12.5 x 25.5 x 31.0 6.5 2222 479 82134 0.15(2) 13.5 x 26.5 x 31.0 7.0 2222 479 82154 0.16(2) 14.0 x 27.0 x 31.0 7.0 2222 479 82164 0.18(2) 15.0 x 28.0 x 31.0 7.5 2222 479 82184 Notes 1. The shading indicates preferred types. 2. Under development. 1999 Apr 29 511 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 15 mm PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 CBA818 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. Fig.20 Outline. Specific reference data for the 1600 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.013 F Rated voltage pulse slope (dU/dt)R at 1600 V (DC) R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC)voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 1400 V/s >100000 M >100000 M >660 V 2560 V; 1 minute 2840 V; 1 minute Available 1600 V DC versions PACKAGING(1) C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 Loose in box 5% 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 02... 2222 479 04... 2222 479 05... 2222 479 06... ORDERING preferred on request on request preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 512 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 1600 V; URac = 550 V/Up-p = 1600 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) MASS (g) Pitch = 15.0 0.4 mm (Pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.0047(4) 0.0051(4) 0.0056(4) 0.0062(4) 0.0068(4) 0.0075(4) 0.0082(4) 0.0091(4) 0.01(4) 0.011(4) 0.012(4) 0.013(4) 6.0 x 15.0 (16.5) x 17.5 1.2 6.5 x 15.5 (17.0) x 17.5 1.3 7.0 x 16.0 (17.5) x 17.5 1.4 7.5 x 16.5 (18.0) x 17.5 1.5 8.0 x 17.0 (18.5) x 17.5 1.6 8.5 x 17.5 (19.0) x 17.5 1.7 9.0 x 18.0 (19.5) x 17.5 1.8 2222 479 02472 .. 06472 2222 479 02512 .. 06512 2222 479 02562 .. 06562 2222 479 02622 .. 06622 2222 479 02682 .. 06682 2222 479 02752 .. 06752 2222 479 02822 .. 06822 2222 479 02912 .. 06912 2222 479 02103 .. 06103 2222 479 02113 .. 06113 2222 479 02123 .. 06123 2222 479 02133 .. 06133 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information"; a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 4. Under development. 1999 Apr 29 513 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt A P Odt CBA355 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.21 Outline. Specific reference data for the 1600 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.013 F < C 0.036 F 0.036 F < C 0.1 F Rated voltage pulse slope (dU/dt)R at 1600 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC)voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 20 x 10-4 25 x 10-4 550 V/s 350 V/s >100000 M >100000 M >660 V 2560 V; 1 minute 2840 V; 1 minute Available 1600 V DC versions PACKAGING(1) Loose in box Taped on reel C-tol DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm H = 16.0 mm; P0 = 12.7 mm; note 2 5% 5% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 479 02... 2222 479 04... 2222 479 05... ORDERING preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 514 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 1600 V; URac = 550 V/Up-p = 1600 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 6.5 x 18.5 x 26.0 1.7 7.0 x 19.0 x 26.0 1.8 7.5 x 19.5 x 26.0 1.9 8.0 x 21.0 x 26.0 2.0 0.027(2) 8.5 x 21.5 x 26.0 2.1 2222 479 02273 0.03(2) 9.0 x 22.0 x 26.0 2.3 2222 479 02303 0.033(2) 9.5 x 22.5 x 26.0 2.5 2222 479 02333 0.036(2) 10.0 x 23.0 x 26.0 2.6 2222 479 02363 0.039(2) 10.5 x 23.5 x 26.0 2.7 2222 479 02393 0.015(2) 0.016(2) 0.018(2) 0.02(2) 0.022(2) 0.024(2) 2222 479 02153 2222 479 02163 2222 479 02183 2222 479 02203 2222 479 02223 2222 479 02243 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.043(2) 2222 479 02433 10.0 x 23.0 x 31.0 5.0 0.051(2) 10.5 x 23.5 x 31.0 5.5 2222 479 02513 0.056(2) 11.0 x 24.0 x 31.0 5.5 2222 479 02563 0.062(2) 12.0 x 25.0 x 31.0 6.0 2222 479 02623 0.068(2) 12.5 x 25.5 x 31.0 6.5 2222 479 02683 0.075(2) 13.0 x 26.0 x 31.0 6.5 2222 479 02753 0.082(2) 13.5 x 26.5 x 31.0 7.0 2222 479 02823 0.091(2) 14.5 x 27.5 x 31.0 7.5 2222 479 02913 0.1(2) 15.0 x 28.0 x 31.0 7.5 2222 479 02104 0.047(2) 2222 479 02473 Notes 1. The shading indicates preferred types. 2. Under development. 1999 Apr 29 515 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 15 mm PITCH 7.5 mm (bent back leads) l andbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 CBA818 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. Fig.22 Outline. Specific reference data for the 2000 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.0091 F Rated voltage pulse slope (dU/dt)R at 2000 V (DC) R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC)voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 1700 V/s >100000 M >100000 M >750 V 3200 V; 1 minute 2840 V; 1 minute Available 2000 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 Loose in box C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 5% 5% 5% 2222 479 12... 2222 479 14... 2222 479 15... 2222 479 16... preferred on request on request preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 516 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 2000 V; URac = 700 V/Up-p = 2000 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) catalogue number(3) MASS (g) Pitch = 15.0 0.4 mm; (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.003(4) 6.0 x 15.0 (16.5) x 17.5 1.2 6.5 x 15.5 (17.0) x 17.5 1.3 7.0 x 16.0 (17.5) x 17.5 1.4 7.5 x 16.5 (18.0) x 17.5 1.5 8.0 x 17.0 (18.5) x 17.5 1.6 8.5 x 17.5 (19.0) x 17.5 1.7 0.0082(4) 9.0 x 18.0 (19.5) x 17.5 0.0091(4) 9.5 x 18.5 (20.0) x 17.5 0.0033(4) 0.0036(4) 0.0039(4) 0.0043(4) 0.0047(4) 0.0051(4) 0.0056(4) 0.0062(4) 0.0068(4) 0.0075(4) 2222 479 12302 .. 16302 2222 479 12332 .. 16332 2222 479 12362 .. 16362 2222 479 12392 .. 16392 2222 479 12432 .. 16432 2222 479 12472 .. 16472 2222 479 12512 .. 16512 2222 479 12562 .. 16562 2222 479 12622 .. 16622 2222 479 12682 .. 16682 2222 479 12752 .. 16752 1.8 2222 479 12822 .. 16822 1.9 2222 479 12912 .. 16912 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 10.0 and 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 4. Under development. 1999 Apr 29 517 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt A P Odt CBA355 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.23 Outline. Specific reference data for the 2000 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.0091 F < C 0.027 F 0.027 F < C 0.056 F Rated voltage pulse slope (dU/dt)R at 2000 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC)voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 18 x 10-4 20 x 10-4 700 V/s 450 V/s >100000 M >100000 M >750 V 3200 V; 1 minute 2840 V; 1 minute Available 2000 V DC versions PACKAGING(1) Loose in box Taped on reel DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 5% 5% 2222 479 12... 2222 479 14... 2222 479 15... preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 518 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 2000 V; URac = 700 V/Up-p = 2000 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 6.5 x 18.5 x 26.0 1.7 7.0 x 19.0 x 26.0 1.8 7.5 x 19.5 x 26.0 1.9 8.0 x 21.0 x 26.0 2.0 0.018(2) 8.5 x 21.5 x 26.0 2.1 2222 479 12183 0.02(2) 9.0 x 22.0 x 26.0 2.3 2222 479 12203 0.022(2) 9.5 x 22.5 x 26.0 2.5 2222 479 12223 0.024(2) 10.0 x 23.0 x 26.0 2.6 2222 479 12243 0.027(2) 10.5 x 23.5 x 26.0 2.7 2222 479 12273 0.01(2) 0.011(2) 0.012(2) 0.013(2) 0.015(2) 0.016(2) 2222 479 12103 2222 479 12113 2222 479 12123 2222 479 12133 2222 479 12153 2222 479 12163 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.03(2) 10.0 x 23.0 x 31.0 5.0 2222 479 12303 0.033(2) 10.5 x 23.5 x 31.0 5.5 2222 479 12333 0.036(2) 11.0 x 24.0 x 31.0 5.5 2222 479 12363 0.039(2) 11.5 x 24.5 x 31.0 6.0 2222 479 12393 0.043(2) 12.0 x 25.0 x 31.0 6.0 2222 479 12433 0.047(2) 13.0 x 26.0 x 31.0 6.5 2222 479 12473 0.051(2) 13.5 x 26.5 x 31.0 7.0 2222 479 12513 0.056(2) 14.0 x 27.0 x 31.0 7.0 2222 479 12563 Notes 1. The shading indicates preferred types. 2. Under development. 1999 Apr 29 519 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MKP 479 GENERAL DATA PITCH 22.5/27.5 mm l b 296x12(full_width) seating plane(1) h (2) lt A P Odt CBA355 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50 Fig.24 Outline. Specific reference data for the 2500 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.033 F Rated voltage pulse slope (dU/dt)R at 2500 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 1.0 F at 100 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC)voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 1700 V/s 900 V/s >100000 M >100000 M >1000 V 3500 V; 1 minute 2840 V; 1 minute Available 2500 V DC versions PACKAGING(1) Loose in box Taped on reel DIMENSIONS lt = 5.0 1.0 mm lt = 3.5 0.5 mm H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 5% 5% 2222 479 22... 2222 479 24... 2222 479 25... preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 520 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 URdc = 2500 V; URac = 900 V/Up-p = 2500 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.002(2) 0.0022(2) 0.0024(2) 0.0027(2) 0.003(2) 0.0033(2) 0.0036(2) 0.0039(2) 0.0043(2) 0.0047(2) 0.0051(2) 0.0056(2) 0.0062(2) 0.0068(2) 0.0075(2) 0.0082(2) 0.0091(2) 0.01(2) 0.011(2) 0.012(2) 0.013(2) 7.0 x 19.0 x 26.0 1.8 7.5 x 19.5 x 26.0 1.9 8.0 x 21.0 x 26.0 2.0 8.5 x 21.5 x 26.0 2.1 9.0 x 22.0 x 26.0 9.5 x 22.5 x 26.0 10.0 x 23.0 x 26.0 10.5 x 23.5 x 26.0 2.3 2.5 2.6 2.7 2222 479 22202 2222 479 22222 2222 479 22242 2222 479 22272 2222 479 22302 2222 479 22332 2222 479 22362 2222 479 22392 2222 479 22432 2222 479 22472 2222 479 22512 2222 479 22562 2222 479 22622 2222 479 22682 2222 479 22752 2222 479 22822 2222 479 22912 2222 479 22103 2222 479 22113 2222 479 22123 2222 479 22133 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.015(2) 0.016(2) 0.018(2) 0.02(2) 0.022(2) 0.024(2) 0.027(2) 0.03(2) 0.033(2) 9.5 x 22.5 x 31.0 10.0 x 23.0 x 31.0 10.5 x 23.5 x 31.0 11.0 x 24.0 x 31.0 12.0 x 25.0 x 31.0 12.5 x 25.5 x 31.0 13.0 x 26.0 x 31.0 14.0 x 27.0 x 31.0 14.5 x 27.5 x 31.0 5.0 5.0 5.5 5.5 6.0 6.5 6.5 7.0 7.5 2222 479 22153 2222 479 22163 2222 479 22183 2222 479 22203 2222 479 22223 2222 479 22243 2222 479 22273 2222 479 22303 2222 479 22333 Notes 1. The shading indicates preferred types. 2. Under development. 1999 Apr 29 521 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CONSTRUCTION Description * Low-inductive wound cell of metallized polypropylene (PP) film, epoxy lacquered * Radial leads, solder-coated wire: - Copper clad steel wire for original pitch = 10 and 15 mm - Copper wire for original pitch = 22.5 and 27.5 mm. 144x12(halfpage) 2 SECTIONS 1 SECTION handbook, halfpage metal spray layer metal spray layer MKP metallized polypropylene film MKP metallised polypropylene film connecting wire connecting wire CBA403 Fig.25 Construction: 160-250-400-630 V versions. Fig.26 Construction: 1000 V-1250 V versions. 3 SECTIONS andbook, halfpage 4 SECTIONS handbook, halfpage metal spray layer metal spray layer MKP metallized polypropylene film MKP metallized polypropylene film connecting wire connecting wire CBA313 Fig.27 Construction: 1600 V-2000 V versions. 1999 Apr 29 CBA312 Fig.28 Construction: 2500 V versions. 522 CBA314 BC Components Product specification AC and pulse metallized polypropylene film capacitors Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION MKP 479 RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the underside of the crimps are in good contact with the printed-circuit board: * For original pitches of 15 mm the capacitors shall be mechanically fixed by the leads. * For larger pitches the capacitors shall be mounted in the same way and the body clamped. Storage temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. 1999 Apr 29 523 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CHARACTERISTICS Capacitance CBA505 4 handbook, full pagewidth C C (%) 2 typical 0 max. -2 -4 min. -6 -50 0 50 100 Tamb (C) Fig.29 Capacitance change at 1 kHz as a function of temperature. Impedance CBA335 296x12(full_width) 10 2 impedance () 10 1 10 0 10 -1 10 nF 100 nF 10 -2 10 -3 10 4 3.3 F 10 5 1.0 F 10 6 10 7 Fig.30 Impedance as a function of frequency: typical curves. 1999 Apr 29 524 f (Hz) 10 8 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 Maximum DC and AC voltage as a function of temperature CBA748 1.2 handbook, full pagewidth factor 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 120 Tamb (C) Fig.31 Multiplying factor for DC and AC voltage as a function of temperature. 1999 Apr 29 525 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 Maximum RMS voltage (sinewave) as a function of frequency CBA357 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 39 00 10 1 10 2 10 3 22 nF 00 10 4 22 12 00 70 0 0 75 nF nF nF nF nF nF 10 4 10 5 10 6 f (Hz) Fig.32 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 160 V. CBA767 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 1 2 4 2 1 00 200 000 70 20 20 75 nF nF nF nF nF nF nF 39 10 1 10 2 10 3 10 4 10 5 f (Hz) 10 Fig.33 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 160 V. 1999 Apr 29 526 6 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA358 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 30 22 10 4 00 00 00 70 220 nF nF nF nF nF 10 1 10 2 10 3 10 4 10 10 5 0 nF 47 nF 10 6 f (Hz) Fig.34 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V. CBA768 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 30 22 10 47 22 10 00 00 00 4 0 0 0 nF nF nF 7 nF nF nF nF 10 1 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.35 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V. 1999 Apr 29 527 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA946 3 296x12(full_width) 10 AC voltage (V) MKP 479 10 2 12 00 10 1 10 2 10 3 nF 47 0 10 4 22 10 0 0 nF nF nF 10 5 47 nF 22 nF 10 6 f (Hz) Fig.36 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V (monitor type). CBA947 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 10 3 10 4 47 22 0 0n nF F 47 nF 10 1 10 2 nF 0 00 10 12 nF 22 nF 10 5 f (Hz) 10 6 Fig.37 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V (monitor type). 1999 Apr 29 528 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA359 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 12 00 10 1 10 2 10 3 nF 47 0 10 4 22 10 0 0 nF nF nF 10 5 47 nF 22 nF 10 6 f (Hz) Fig.38 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V. CBA769 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 10 3 10 4 47 22 0 0n nF F 47 nF 10 1 10 2 nF 0 00 10 12 nF 22 nF 10 5 f (Hz) 10 6 Fig.39 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V. 1999 Apr 29 529 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA360 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 68 0 10 1 10 3 10 4 47 22 10 4 nF 0 n 0 n 0 n 7 n F F F F 22 10 nF 10 5 nF 10 6 10 7 f (Hz) Fig.40 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V (monitor type). CBA770 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 10 0 22 nF 10 6 nF nF 10 nF nF 10 5 0 nF 10 4 47 0 10 1 10 3 nF 47 0 22 68 f (Hz) 10 7 Fig.41 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V (monitor type). 1999 Apr 29 530 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA360 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 68 0 10 1 10 3 10 4 47 22 10 4 nF 0 n 0 n 0 n 7 n F F F F 22 10 nF 10 5 nF 10 6 10 7 f (Hz) Fig.42 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V. CBA770 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 10 0 22 nF 10 6 nF nF 10 nF nF 10 5 0 nF 10 4 47 0 10 1 10 3 nF 47 0 22 68 f (Hz) 10 7 Fig.43 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 630 V. 1999 Apr 29 531 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA905 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 15 33 nF nF nF 10 1 10 3 nF nF 0 22 0 68 15 10 4 10 5 10 6 10 7 f (Hz) Fig.44 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 1000 V. CBA906 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 15 33 nF nF 0 nF 10 1 10 3 nF nF 22 0 68 15 10 4 10 5 10 6 f (Hz) 10 7 Fig.45 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 1000 V. 1999 Apr 29 532 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA907 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 10 22 nF nF nF 0 0 15 nF nF 10 1 10 3 47 10 10 4 10 5 10 6 10 7 f (Hz) Fig.46 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 1250 V. CBA908 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 10 22 nF nF nF 0 0 15 nF nF 10 1 10 3 47 10 10 4 10 5 10 6 f (Hz) 10 7 Fig.47 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 1250 V. 1999 Apr 29 533 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA909 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 nF 7 nF 4. 10 22 47 0 10 1 10 3 10 4 10 5 nF nF 10 nF 10 6 10 7 f (Hz) Fig.48 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 1600 V. CBA910 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 nF 7 nF 4. 10 22 47 0 10 1 10 3 10 4 nF nF 10 nF 10 5 10 6 f (Hz) 10 7 Fig.49 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 1600 V. 1999 Apr 29 534 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA911 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 nF 3 nF 3. 8 nF 6. 15 nF 47 33 10 1 10 3 10 4 10 5 nF 10 6 10 7 f (Hz) Fig.50 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 2000 V. CBA912 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 nF 3 F 3. 8 n nF 6. 15 nF 47 33 10 1 10 3 10 4 10 5 nF 10 6 f (Hz) 10 7 Fig.51 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 2000 V. 1999 Apr 29 535 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 CBA916 3 296x12(full_width) 10 AC voltage (V) MKP 479 10 2 nF 2 nF 2. 7 F 4. n F 10 2 n nF 2 3 3 10 1 10 3 10 4 10 5 10 6 10 7 f (Hz) Fig.52 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 2500 V. CBA917 296x12(full_width) 10 3 AC voltage (V) MKP 479 10 2 nF 2 F 2. 7 n 4. 0 nFnF 1 2 nF 2 3 3 10 1 10 3 10 4 10 5 10 6 f (Hz) 10 7 Fig.53 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 2500 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 32 to 53. 1999 Apr 29 536 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 Tangent of loss angle CBA918 296x12(full_width) 10 3 dissipation factor (x 10-4) 10 9 8 7 6 5 16 15 14 13 12 11 10 2 4 3 2 1 10 1 10 0 10 2 10 3 10 4 10 5 10 6 f (Hz) 10 7 160 V: C 0.10 F, curve 5. C 0.16 F, curve 6. C 0.75 F, curve 7. C 1.0 F, curve 11. 250 V: C 0.068 F, curve 4. C 0.091 F, curve 5. C 0.220 F, curve 6. C 0.470 F, curve 7. 400 V: C 0.043 F, curve 4. C 0.1 F, curve 5. C 0.22 F, curve 6. C 0.33 F, curve 7. 630 V: C 0.024 F, curve 4. C 0.047 F, curve 5. C 0.11 F, curve 6. C 0.22 F, curve 6. 1 000 V: C 0.039 F, curve 2. C 0.1 F, curve 3. C 0.15 F, curve 4. C 0.22 F, curve 5. C 1.8 F, curve 12. C 3.0 F, curve 13. C 3.9 F, curve 16. C 0.680 F, curve 10. C 1.0 F, curve 12. C 2.0 F, curve 14. C 2.7 F, curve 15. C 0.47 F, curve 8. C 0.68 F, curve 9. C 1.0 F, curve 10. C 1.2 F, curve 11. C 0.3 F, curve 7. C 0.47 F, curve 9. C 0.68 F, curve 10. C 0.27 F, curve 6. 1 250 V: C 0.024 F, curve 2. C 0.068 F, curve 3. C 0.1 F, curve 4. C 0.18 F, curve 5. 1 600 V: C 0.013 F, curve 2. C 0.033 F, curve 3. C 0.1 F, curve 4. 2 000 V: C 0.091 F, curve 1. C 0.027 F, curve 2. C 0.056 F, curve 3. 2 500 V: C 0.033 F, curve 1. Fig.54 Tangent of loss angle as a function of frequency; typical curves. 1999 Apr 29 537 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 Insulation resistance CBA647 106 handbook, full pagewidth RC (s) 105 104 0 20 40 60 80 100 120 Tamb (C) Fig.55 RC product as a function of ambient free air temperature; typical curve. Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb) CBA757 12 handbook, full pagewidth T (C) 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 120 Tamb (C) Fig.56 Maximum allowed component temperature rise as a function of the ambient temperature. 1999 Apr 29 538 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/C Table 1 Heat conductivity ORIGINAL PITCH (mm) bmax (mm) 10 15 22.5 27.5 4.0 4.0 5.0 - - 4.5 4.5 6.0 - - 5.0 5.0 6.0 12.0 13.0 5.5 6.0 6.5 13.0 15.0 6.0 6.0 6.5 13.0 15.0 6.5 6.5 8.0 15.0 17.0 7.0 - 8.0 15.0 17.0 7.5 - 9.0 17.0 18.0 8.0 - 9.0 17.0 20.0 8.5 - 11.0 18.0 20.0 9.0 - 11.0 18.0 22.0 9.5 - 12.0 20.0 22.0 10.0 - 12.0 20.0 23.0 10.5 - - 22.0 25.0 11.0 - - - 25.0 11.5 - - - 27.0 12.0 - - - 27.0 12.5 - - - 30.0 13.0 - - - 30.0 13.5 - - - 30.0 14.0 - - - 30.0 14.5 - - - 33.0 15.0 - - - 33.0 15.5 - - - 37.0 16.0 - - - 37.0 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. Power dissipation can be calculated in accordance with chapter "Introduction", section "Maximum power dissipation". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G : * T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C). 1999 Apr 29 539 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 Measuring the component temperature A thermocouple must be attached to the capacitor body; see Fig.57. handbook, halfpage thermocouple CBA771 Fig.57 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 1999 Apr 29 540 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 Application note and limiting conditions These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated by safety standards and therefore electromagnetic interference suppression capacitors conforming to the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU 2 dU 2 x -------- x dt < U Rdc x -------- dt dt rated 0 T is the pulse duration. The rated voltage pulse slope is valid for ambient temperatures up to 85 C. For higher temperatures a derating factor of 3% per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits in Fig.56. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1 "Heat conductivity". 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains included). VOLTAGE CONDITIONS FOR 6 ABOVE Tamb 85 C ALLOWED VOLTAGES 85 C < Tamb 105 C URac 0.7 x URac Maximum temporary RMS -overvoltage (<24 hours) 1.25 x URac 0.875 x URac Maximum peak voltage (Vo-p) (<2 s) 1.6 x URdc 1.1 x URdc Maximum continuous RMS voltage 1999 Apr 29 541 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 Example: 2222 479 42474 C = 470 nF, 250 V used for S-correction. This is a signal as in Fig.58 with: Up-p = 108 V; Up = 170 V; T1 = 12 s; T2 = 64 s; Ip-p = 5 A The ambient temperature is 50 C. Checking the conditions: 1. The peak voltage Up = 170 V is lower than 250 V (DC). 2. The peak-to-peak voltage 108 V is lower than 2 x 2 x 160 V ( AC ) = 450 U p - p . 3. Ip = 2.5 A is lower than 0.47 F x 60 V s = 28 A . 4. The dissipated power is about 40 mW as calculated with Fourier terms and tg maximum values. 40 mW This gives a temperature rise of ------------------------------- = 3.3 C which is permitted; see Fig.56. 12 mW C 5. Depends on actual application. 6. Not applicable. CBA279 I handbook, full pagewidth Ipp t T1 T2 U Upp Up t Fig.58 Voltage signal. 1999 Apr 29 542 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 MARKING Product marking Capacitors are marked on top in black ink (see Fig.59) with the following information: 1. Manufacturer's logo (only for original pitches > 10 mm) 144x12(halfpage) 2. Rated capacitance code in accordance with "IEC 60062" 3. Tolerance on rated capacitance J = 5% 47n J 400V 479 MKP K1 CBA365 4. Rated (DC) voltage (e.g. 400 V) 5. Manufacturer's type designation with code for dielectric material (479 MKP) 6. Year and month of manufacture in code (e.g. K1); see Table 2. Table 2 Fig.59 Example of marking. Letter codes for year and numbers for month of production YEAR LETTER CODE 1998 1999 1999 Apr 29 MONTH CODE K January 1 L February 2 2000 M March 3 2001 N April 4 2002 P May 5 2003 R June 6 2004 S July 7 2005 T August 8 2006 U September 9 2007 V October O 2008 W November N 2009 X December D 543 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 Package marking The package containing the capacitors is marked as shown in Fig.60. Please note: In due time BC COMPONENTS will replace PHILIPS COMPONENTS Barcode label marking handbook, full pagewidth 1. LINE MARKING EXPLANATION 3. 1 Manufacturer's name 4. 2 Country of origin 5. 3 Sub-family 4 Type description 5 Capacitance value in F, tolerance, voltage and climatic category ("IEC 60068-1") 6 - 7 * Country of origin: Belgium 2. 6. Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO 7. 8. * Country of origin: China Preference origin code: N Country of origin in code: 260 (PRC) Responsible production centre: 07 9. 10. 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) CCA325 Fig.60 Barcode label. 1999 Apr 29 544 BC Components Product specification AC and pulse metallized polypropylene film capacitors MKP 479 QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile: "IEC 60068-2-21" Bending: "IEC 60068-2-21" Resistance to soldering heat: "IEC 60068-2-20" Component solvent resistance load 10 N; 10 s no visible damage legible marking load 5 N; 4 x 90 C/C 1% for 250 to 2500 V: pitch = 22.5 or 27.5 mm solder bath: 260 C; 10 s C/C 2% for 160 V: all pitches; isopropyl alcohol; 23 C; 5 minutes for 250 V to 2000 V: original pitch = 10 and 15 mm tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF < C 470 nF) tan 15 x 10-4 (C > 470 nF) Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" 10 Hz to 55 kHz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours half sinewave; 490 m/s2; 11 ms C/C 1% for 250 to 2500 V: pitch = 22.5 or 27.5 mm C/C 2% for 160 V: all pitches; for 250 V to 2000 V: original pitch = 10 and 15 mm tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF < C 470 nF) tan 15 x 10-4 (C > 470 nF) Climatic sequence Dry heat: "IEC 60068-2-2" Damp heat, cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" Damp heat, cyclic, test Db, remaining cycles: "IEC 60068-2-30" 16 hours; 105 C C/C 1% for 250 to 2500 V: pitch = 22.5 or 27.5 mm C/C 3% for 160 V: all pitches; for 250 V to 2000 V: original pitch = 10 and 15 mm 2 hours; -55 C tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF < C 470 nF) tan 15 x 10-4 (C > 470 nF) Rins 50% of specified value Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH C/C 1% for 250 to 2500 V: pitch = 22.5 or 27.5 mm C/C 3% for 160 V: all pitches; for 250 V to 2000 V: original pitch = 10 and 15 mm tan 5 x 10-4 Rins 50% of specified value 1999 Apr 29 545 BC Components Product specification AC and pulse metallized polypropylene film capacitors PROCEDURE (quick reference) TEST Endurance (AC): "IEC 60384-17" MKP 479 2000 hours; 85 C 1.25 x URac (RMS); 50 Hz 2000 hours; 105 C 0.875 x URac (RMS); 50 Hz Heat storage: "IEC 60384-17" Resistance to soldering heat with preheating: "IEC 60384-17" Passive flammability: "IEC 60384-1" Endurance (DC): "IEC 60384-17" REQUIREMENTS C/C 5% tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF < C 470 nF) tan 15 x 10-4 (C > 470 nF) Rins 50% of specified value C/C 1% for 250 to 2500 V: pitch = 22.5 or 27.5 mm C/C 3% for 160 V: all pitches; for 250 V to 2000 V: original pitch = 10 and 15 mm 2000 hours; 105 C body temperature: 105 C bath temperature: 260 C dwell time: 10 s tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF < C 470 nF) tan 15 x 10-4 (C > 470 nF) C/C 1% for 250 to 2500 V: pitch = 22.5 or 27.5 mm C/C 2% for 160 V: all pitches; for 250 V to 2000 V: original pitch = 10 and 15 mm tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF < C 470 nF) tan 15 x 10-4 (C > 470 nF) no burning class C 2000 hours: 1.25 x URdc; 85 C 0.875 x URdc; 105 C C/C 1% for 250 to 2500 V: pitch = 22.5 or 27.5 mm C/C 3% for 160 V: all pitches; for 250 V to 2000 V: original pitch = 10 and 15 mm tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF < C 470 nF) tan 15 x 10-4 (C > 470 nF) Rins 50% of specified value Note 1. For detailed information: see "Type detail specification HQN-384-17/105". 1999 Apr 29 546