LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LHS Long life snap-ins, 105 Upgrade! Series LHS The lower temperature range of the category temperature range has been expended. For solar power generation Endurance with ripple current : 5,000 hours at 105 Rated voltage range : 450 to 500V For inverter control, switching power supplies Non solvent resistant type RoHS2 Compliant Downsizing LXS Longer life KMS SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 450 to 500Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 450 to 500V tan (Max.) 0.20 Rated voltage (Vdc) 450 to 500V Z(-25)/Z(+20) 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value (475, 500Vdc : 250%) Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Terminal Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Negative mark PC board pin-out (View from Solder side) Code : LI (30,35) Sleeve (PET : Brown) Negative mark 4.00.5 L2.5 Vent D+1max. D+1max. 10 2-2 PC board pin-out (View from Solder side) 2-1.2x6 4.20.5 Terminal Vent 50.5 L2.5 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E LHS 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100F:101, 330F:331) Dummy terminal code Terminal code(VS, LI) Voltage code (ex. 450V:451, 475V:4H1) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 LHSSeries STANDARD RATINGS WV (Vdc) Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 450 100 120 150 150 180 180 220 220 220 270 270 270 270 330 330 330 330 330 390 390 470 470 470 560 560 680 680 820 22 x25 22 x30 22 x35 25.4x 25 22x 40 25.4x 30 22 x 45 25.4x35 30 x25 22 x50 25.4x40 30 x30 35 x25 22x 60 25.4x 45 25.4x 50 30 x 35 35 x 30 25.4x 60 30 x40 30 x45 30 x50 35 x35 35 x40 35x 45 30 x 60 35 x 50 35 x 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.71 0.81 0.93 0.93 1.04 1.05 1.17 1.21 1.15 1.33 1.36 1.29 1.25 1.54 1.54 1.56 1.46 1.41 1.74 1.63 1.84 1.87 1.71 1.95 1.99 2.33 2.22 2.52 Part No. ELHS451VSN101MP25S ELHS451VSN121MP30S ELHS451VSN151MP35S ELHS451VSN151MQ25S ELHS451VSN181MP40S ELHS451VSN181MQ30S ELHS451VSN221MP45S ELHS451VSN221MQ35S ELHS451VSN221MR25S ELHS451VSN271MP50S ELHS451VSN271MQ40S ELHS451VSN271MR30S ELHS451VSN271MA25S ELHS451VSN331MP60S ELHS451VSN331MQ45S ELHS451VSN331MQ50S ELHS451VSN331MR35S ELHS451VSN331MA30S ELHS451VSN391MQ60S ELHS451VSN391MR40S ELHS451VSN471MR45S ELHS451VSN471MR50S ELHS451VSN471MA35S ELHS451VSN561MA40S ELHS451VSN561MA45S ELHS451VSN681MR60S ELHS451VSN681MA50S ELHS451VSN821MA60S WV (Vdc) 475 500 Cap (F) 150 180 180 220 270 270 330 330 390 390 470 470 470 560 120 150 150 180 220 220 270 270 330 330 390 390 470 560 Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 30 x 25 30 x 30 35 x 25 30 x 35 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 30 x 60 35 x 45 35 x 50 35 x 60 30 x 25 30 x 30 35 x 25 30 x 35 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 30 x 60 35 x 45 35 x 50 35 x 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.01 1.11 1.08 1.26 1.44 1.35 1.63 1.51 1.80 1.70 2.05 1.91 1.95 2.21 0.90 1.02 0.99 1.14 1.30 1.22 1.47 1.37 1.66 1.57 1.87 1.74 1.95 2.21 Part No. ELHS4H1VSN151MR25S ELHS4H1VSN181MR30S ELHS4H1VSN181MA25S ELHS4H1VSN221MR35S ELHS4H1VSN271MR40S ELHS4H1VSN271MA30S ELHS4H1VSN331MR45S ELHS4H1VSN331MA35S ELHS4H1VSN391MR50S ELHS4H1VSN391MA40S ELHS4H1VSN471MR60S ELHS4H1VSN471MA45S ELHS4H1VSN471MA50S ELHS4H1VSN561MA60S ELHS501VSN121MR25S ELHS501VSN151MR30S ELHS501VSN151MA25S ELHS501VSN181MR35S ELHS501VSN221MR40S ELHS501VSN221MA30S ELHS501VSN271MR45S ELHS501VSN271MA35S ELHS501VSN331MR50S ELHS501VSN331MA40S ELHS501VSN391MR60S ELHS501VSN391MA45S ELHS501VSN471MA50S ELHS501VSN561MA60S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 450Vdc 475, 500Vdc 50 0.77 0.70 120 1.00 1.00 300 1.16 1.16 1k 1.30 1.30 10k 1.41 1.41 50k 1.43 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U