Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 3224172212 Item: DIP24-1A72-12M Conditions Coil Data at 20 C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact-No. Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Special Product Data Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Housing material Connection pins Magnetic Shield Reach / RoHS conformity Environmental data Typ Min Typ Max Unit Max Unit operating temperature + self heating Conditions Contact data 66/3 Min 66/3 !" #$ $" "% & not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ( ) * +$ Start Value ( $ Start Value ' , "- * $' ) % !$ $" ' RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch . ' / ' Conditions Min according to IEC 255-5 RH <45%, 200 VDC measuring voltage @ 10 kHz Conditions Typ ) ) 0 Max ' ' Unit 1 2 0 epoxy resin CuFe2P, tin plated yes yes Min Typ Max Unit Modifications in the sense of technical progress are reserved Designed at: Last Change at: 03.05.11 Designed by: Last Change by: THAUKE Approval at: Approval at: 03.05.11 Approval by: Approval by: CRUF Version: 1 Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 3224172212 Item: DIP24-1A72-12M Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Max ' 5 5 ' wave soldering max. 5 sec. / 6' Unit 3 3 4 4 4 fully sealed Conditions General data Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz Min Total weigth Packaging Typ Max 25 pcs per tube Unit 3 Modifications in the sense of technical progress are reserved Designed at: Last Change at: 03.05.11 Designed by: Last Change by: THAUKE Approval at: Approval at: 03.05.11 Approval by: Approval by: CRUF Version: 1