STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 N-channel 100 V, 0.008 typ., 80 A STripFETTM VII DeepGATETM Power MOSFETs in DPAK, TO-220FP, H2PAK-2 and TO-220 Datasheet - production data Features TAB Order codes 3 1 DPAK 1 2 3 TO-220FP STD80N10F7 STF80N10F7 100 V TAB TAB VDS @ TJmax RDS(on) max ID PTOT 0.01 70 A 85 W 0.01 40 A 30 W 80 A 110 W STH80N10F7-2 0.0095 STP80N10F7 0.01 2 3 1 3 H2PAK-2 1 2 TO-220 * Ultra low on-resistance * Low gate input resistance Figure 1. Internal schematic diagram ' 7$% * Extremely low gate charge ' 7$% Applications * Switching applications Description These devices utilize the 7th generation of design rules of ST's proprietary STripFETTM technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest RDS(on) in all packages. * * 6 '3$.72DQG 72)3 QR7$% 6 +3$. $0Y Table 1. Device summary Order codes Marking Package Packaging DPAK Tape and reel TO-220FP Tube STH80N10F7-2 H2PAK-2 Tape and reel STP80N10F7 TO-220 Tube STD80N10F7 STF80N10F7 80N10F7 February 2014 This is information on a product in full production. DocID025865 Rev 1 1/25 www.st.com Contents STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 2/25 .............................................. 9 DocID025865 Rev 1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter H2PAK-2 DPAK TO-220 Unit TO-220FP VDS Drain-source voltage 100 V VGS Gate-source voltage 20 V ID Drain current (continuous) at TC = 25 C 70 80 40 A ID Drain current (continuous) at TC = 100 C 48 54 30 A IDM (1) Drain current (pulsed) 280 320 160 A PTOT Total dissipation at TC = 25 C 85 110 30 W Tstg Storage temperature - 55 to 175 Tj C Max. operating junction temperature 1. Pulse width limited by safe operating area. Table 3. Thermal data Value Symbol Parameter Rthj-pcb Thermal resistance junction-pcb max Rthj-amb Thermal resistance junction-ambient max Rthj-case Thermal resistance junction-case max DocID025865 Rev 1 DPAK TO-220FP H2PAK-2 TO-220 50 35 C/W 62.5 1.76 5 Unit 62.5 1.36 C/W C/W 3/25 25 Electrical characteristics 2 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Electrical characteristics (TC = 25 C unless otherwise specified) Table 4. On /off states Symbol Parameter Test conditions Min. Typ. Max. Unit Drain-source breakdown voltage ID = 250 A, VGS = 0 IDSS Zero gate voltage drain current (VGS = 0) VDS = 100 V VDS = 100 V, TC=125 C 1 100 A A IGSS Gate-body leakage current (VDS = 0) VGS = 20 V 100 A VGS(th) Gate threshold voltage VDS = VGS, ID = 250 A 3.5 4.5 V Static drain-source on-resistance for DPAK, TO-220 and TO-220FP: ID = 40 A, VGS=10 V 0.0085 0.010 RDS(on) for H2PAK-2: VGS=10 V, ID=40 A 0.008 0.0095 Min. Typ. Max. Unit - 3100 - pF - 700 - pF - 45 - pF - 45 - nC - 18 - nC - 13 - nC Min. Typ. Max. Unit - 19 - ns - 32 - ns - 36 - ns - 13 - ns V(BR)DSS 100 2.5 V Table 5. Dynamic Symbol Parameter Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge Test conditions VDS = 50 V, f = 1 MHz, VGS = 0 VDD = 50 V, ID = 80 A, VGS = 10 V (see Figure 18) Table 6. Switching times Symbol td(on) tr td(off) tf 4/25 Parameter Test conditions Turn-on delay time Rise time Turn-off delay time VDD = 50 V, ID = 40 A, RG = 4.7 , VGS = 10 V (see Figure 19 and Figure 22) Fall time DocID025865 Rev 1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Electrical characteristics Table 7. Source drain diode Symbol Parameter Test conditions Min. Typ. Max. Unit Source-drain current - 80 A ISDM (1) Source-drain current (pulsed) - 320 A VSD (2) Forward on voltage - 1.1 V ISD ISD = 80 A, VGS = 0 trr Reverse recovery time Qrr Reverse recovery charge IRRM Reverse recovery current ISD = 80 A, di/dt = 100 A/s VDD = 80 V, Tj=150 C (see Figure 22) - 70 ns - 125 nC - 3.6 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration = 300 s, duty cycle 1.5% DocID025865 Rev 1 5/25 25 Electrical characteristics 2.1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Electrical characteristics (curves) Figure 2. Safe operating area for DPAK, H2PAK-2 and TO-220 GIPD220720131539FSR ID (A) 100 his t in a n tio y m a er d b Op ite Lim Figure 3. Thermal impedance for DPAK, H2PAK-2 and TO-220 AM18025v1 K =0.5 is ea a r (on) S D xR 0.2 0.1 100s 10 0.05 0.02 10 -1 c 0.01 1ms Tj=175C Tc=25C 1 Single pulse 10ms Sinlge pulse 0.1 0.1 10 1 VDS(V) Figure 4. Safe operating area for TO-220FP AM15983v1 ID (A) 100 t his in a ion y m at er d b p O ite Lim is ea a r (on) S D xR 10 -2 10 -5 10 -4 10 -2 10 -3 10 -1 10 0 tp(s) Figure 5. Thermal impedance for TO-220FP AM18026v1 K =0.5 0.2 0.1 10 -1 0.05 100s 0.02 10 0.01 1ms Tj=175C Tc=25C 1 10 1 Single pulse 10ms Sinlge pulse 0.1 0.1 c 10 -2 VDS(V) Figure 6. Output characteristics 10 -3 10 -5 10 -4 10 -2 10 -3 10 -1 10 0 tp(s) Figure 7. Transfer characteristics AM15972v1 AM15971v1 ID (A) ID (A) VGS =10 V 300 9V 250 8V 200 300 VDS=9V 250 200 7V 150 150 6V 100 50 50 0 0 6/25 100 5V 0 2 4 6 8 VDS(V) DocID025865 Rev 1 2 4 6 8 10 VGS(V) STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Figure 8. Static drain-source on-resistance for DPAK and TO-220 AM18070v1 RDS(on) (m) VGS=10V Electrical characteristics Figure 9. Static drain-source on-resistance for H2PAK-2 AM15973v1 RDS(on) (m) VGS=10V 9.1 8.6 8.9 8.4 8.7 8.2 8.5 8.0 8.3 7.8 8.1 7.6 7.9 7.4 7.7 7.2 7.5 7.0 20 0 60 40 80 ID(A) Figure 10. Static drain-source on-resistance for TO-220FP AM15984v1 RDS(on) (m) VGS=10V 0 20 80 ID(A) Figure 11. Gate charge vs gate-source voltage AM15974v1 VGS (V) VDD=50V ID=80A 12 9.1 60 40 10 8.9 8.7 8 8.5 8.3 6 8.1 4 7.9 2 7.7 7.5 0 5 10 15 20 25 30 ID(A) DocID025865 Rev 1 0 0 10 20 30 40 50 Qg(nC) 7/25 25 Electrical characteristics STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Figure 12. Capacitance variations Figure 13. Normalized gate threshold voltage vs temperature C (pF) 3500 AM15975v1 3000 Ciss AM15976v1 VGS(th) (norm) 1.2 ID=250A 1 2500 0.8 2000 0.6 1500 0.4 1000 0.2 500 0 0 20 80 60 40 Coss Crss VDS(V) Figure 14. Normalized on-resistance vs temperature AM15977v1 RDS(on) (norm) ID=40A VGS=10V 2 0 -55 -30 -5 20 45 95 120 70 TJ(C) Figure 15. Source-drain diode forward characteristics AM15978v1 VSD (V) 1.1 TJ=-55C 1 1.5 0.9 TJ=25C 0.8 1 0.7 TJ=150C 0.5 0.6 0 -55 -30 -5 0.5 20 45 70 95 120 TJ(C) Figure 16. Normalized VDS vs temperature AM15979v1 VDS (norm) ID=1mA 1.04 1.03 1.02 1.01 1 0.99 0.98 0.97 0.96 -55 -30 -5 8/25 20 45 70 95 120 TJ(C) DocID025865 Rev 1 0 20 40 60 80 ISD(A) STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 3 Test circuits Test circuits Figure 17. Switching times test circuit for resistive load Figure 18. Gate charge test circuit VDD 12V 47k 1k 100nF 3.3 F 2200 RL F IG=CONST VDD VGS 100 Vi=20V=VGMAX VD RG 2200 F D.U.T. D.U.T. VG 2.7k PW 47k 1k PW AM01468v1 Figure 19. Test circuit for inductive load switching and diode recovery times A A AM01469v1 Figure 20. Unclamped inductive load test circuit L A D G D.U.T. FAST DIODE B B VD L=100H S 3.3 F B 25 1000 F D VDD 2200 F 3.3 F VDD ID G RG S Vi D.U.T. Pw AM01470v1 AM01471v1 Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 DocID025865 Rev 1 10% AM01473v1 9/25 25 Package mechanical data 4 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 10/25 DocID025865 Rev 1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Package mechanical data Figure 23. TO-220FP drawing 7012510_Rev_K_B DocID025865 Rev 1 11/25 25 Package mechanical data STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Table 8. TO-220FP mechanical data mm Dim. Min. Typ. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 12/25 Max. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 DocID025865 Rev 1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Package mechanical data Figure 24. DPAK (TO-252) type A drawing 0068772_M_type_A DocID025865 Rev 1 13/25 25 Package mechanical data STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Table 9. DPAK (TO-252) type A mechanical data mm Dim. Min. Typ. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1.00 1.50 (L1) 2.80 L2 0.80 L4 0.60 1.00 R V2 14/25 Max. 0.20 0 8 DocID025865 Rev 1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Package mechanical data Figure 25. DPAK (TO-252) type A footprint (a) Footprint_REV_M_type_A a. All dimensions are in millimeters DocID025865 Rev 1 15/25 25 Package mechanical data STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Figure 26. HPAK-2 drawing 8159712_C 16/25 DocID025865 Rev 1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Package mechanical data Table 10. HPAK-2 mechanical data mm Dim. Min. Typ. Max. A 4.30 4.80 A1 0.03 0.20 C 1.17 1.37 e 4.98 5.18 E 0.50 0.90 F 0.78 0.85 H 10.00 10.40 H1 7.40 7.80 - L 15.30 15.80 L1 1.27 1.40 L2 4.93 5.23 L3 6.85 7.25 L4 1.5 1.7 M 2.6 2.9 R 0.20 0.60 V 0 8 DocID025865 Rev 1 17/25 25 Package mechanical data STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Figure 27. HPAK-2 recommended footprint (dimensions are in mm) 8159712_C 18/25 DocID025865 Rev 1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Package mechanical data Figure 28. TO-220 type A drawing BW\SH$B5HYB7 DocID025865 Rev 1 19/25 25 Package mechanical data STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Table 11. TO-220 type A mechanical data mm Dim. Min. Typ. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 20/25 Max. 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 P 3.75 3.85 Q 2.65 2.95 DocID025865 Rev 1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 5 Packaging mechanical data Packaging mechanical data Figure 29. Tape for DPAK (TO-252) 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 DocID025865 Rev 1 21/25 25 Packaging mechanical data STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Figure 30. Reel for DPAK (TO-252) T REEL DIMENSIONS 40mm min. Access hole At slot location B D C N A Full radius G measured at hub Tape slot in core for tape start 25 mm min. width AM08851v2 Table 12. DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 22/25 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 DocID025865 Rev 1 18.4 22.4 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Packaging mechanical data Table 13. HPAK-2 tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 DocID025865 Rev 1 Min. Max. 330 13.2 26.4 30.4 23/25 25 Revision history 6 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Revision history Table 14. Document revision history 24/25 Date Revision 07-Feb-2014 1 Changes First release. DocID025865 Rev 1 STD80N10F7, STF80N10F7, STH80N10F7-2, STP80N10F7 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER'S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR "AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL" INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2014 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com DocID025865 Rev 1 25/25 25 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STD80N10F7 STP80N10F7 STF80N10F7 STH80N10F7-2