Circuit separators Separator end sections Product Type Order P/N Product Type With possibility of mounting a protective cover CPM, and a marker-holder PEP. Extends 5 mm .20" on sides of the block and 11,5 mm .45" on top (1). For blocks : MA 2,5/5 (1) M 4/6 except D and G (1) (2) M 6/8 - M 10/10 (1) (2) M 4/6.H (1) Height : 59,5 mm 2.34" 67 mm 2.64" 64,5 mm 2.54" Width : 51 mm 2.01" Thickness : 3 mm .118" Possibility of marking, by the user, on the back of the separator. For blocks : M 4/6 except D and G M 6/8 - M 10/10 M 4/6.H M 1,5/6.HH and ADV Width : 51 mm 2.01" Thickness : 2 mm .079" Separator end section grey SCF61 1SNA 114 202 R2500 For M 4/6.D block only. Extends 2 mm .079" around the block. Separator end section SCF.D grey SCF6.D (1) For SCF6, snapped on block (2) For SCFM6, mounting on PR1, PR4 and PR5 rails Separator end section 61,5 mm 2.42" 69 mm 2.72" 66,5 mm 2.62" Thickness : 1 mm .039" Height : Only for NTLP blocks. (1) With cut-out for busbar passage. Snapped on PR3, PR4 and PR5 rails. Extends 3 mm .12" around the block excepting on top. (2) Snapped onto the extremity of the BJM62 connector bars before they are mounted on the blocks. Thickness (1) : 1,5 mm .059" SCF.D (1) 1SNA 114 117 R0700 SCD (2) 1SNA 103 189 R2600 white For spring blocks. SCM... Circuit separator grey orange orange orange SCD5.2L SCD5.2L SCD5.3L SCD5.4L 1SNA 291 351 R0300 1SNA 291 352 R0400 1SNA 291 362 R0600 1SNA 291 372 R0000 Separator end section The SCM separator snaps onto the top of the open terminal blocks, once the terminal board is assembled. It does not increase the thickness of the blocks but extends 8 mm .315" on top. For blocks : MA 2,5/5 (1) MA 2,5/5.D (2) M 1,5/6.HH and ADV blocks, M 4/6, M 6/8, M 10/10, M 16/12 (3) M 4/6.D (4) ADO System(R) blocks (5) grey SCMA5 (1) 1SNA 116 728 R2500 grey SCMA5D (2) 1SNA 116 720 R2100 grey orange SCM6 (3) SCM6 (3) 1SNA 113 003 R1000 1SNA 103 233 R2100 grey SCM6D (4) 1SNA 113 482 R0500 grey SCAD (5) 1SNA 196 896 R0000 1SNA 118 707 R0300 1SNA 128 707 R0500 grey SCFM6 1SNA 114 825 R0500 grey grey grey grey grey SCF6G (1) SCF12 (2) SCF16 (3) SCF22 (4) SCFT2 (5) 1SNA 113 075 R1700 1SNA 113 102 R1000 1SNA 113 101 R1700 1SNA 113 851 R1600 1SNA 114 522 R0500 With possibility of mounting a protective cover CPM, and a marker-holder PEP. Snap on mounting on PR1, PR3, PR4 and PR5. This separator does not replace an end section which must be used on the block. For blocks : M 6/9.EE M 6/12.FF Thickness : 1 mm .039" Thickness : 2,5 mm .098" Separator end section SCF6 SCF6 Thickness : 3 mm .118" Separator end section Circuit separator grey blue With possibility of mounting a protective cover CPM, and a marker-holder PEP. Extends 5 mm .20" on sides of the block and 11,5 mm .45" on top. For blocks : M 4/6.G (1) M 16/12 (2) M 35/16 (3) M 70/22 (4) M 6/8.ST(5) 1SNA 118 495 R1700 SCD Separator end section grey Order P/N white SCF9 1SNA 103 672 R0100 Separator for use with 1/4 turn terminal blocks, with possibility of mounting one or two protective covers CPM side by side. Snap on mounting on PR1, PR3, PR4 and PR5 rails. 63 mm 2.48" Height : 70,5 mm 2.78" 68 mm 2.68" Width : 77,5 mm 3.05" Thickness : 1 mm .039" Separator end section grey SCFT1* 1SNA 103 588 R2600 Accessories : J CPM cover protects the user from accidental touch on live circuits. It is clipped onto the end sections (FE), onto the intermediate sections (FJ) and onto the SCF, SCFT or SCFM separators. It can also be used for marking the terminal unit by means of a blank strip RTC, which slides into the cover. CPM + RTC 3 Protective cover CPM width : 32 mm 1.26" CPM length : 500 mm 19.70" RTC width : 20 mm .79" RTC length : 1 m 39" clear beige Top marking strip for CPM CPM RTC 1SNA 187 312 R1400 1SNA 197 312 R1600 1SNA 163 156 R2700 Marker holder PEP 1SNA 113 762 R2400 This marker holder snaps on separator end sections SCF or SCFM and on the ECP and ECS power blocks' partitions. It can receive 1 label RC610. *Note : Not to be mounted on SCFT1 separator end section. 512 160T11070 051129 PEP