F-219 (Rev 23JAN19) SFC-135-T2-L-D-A-K SFC-120-T2-L-D-A SFC-110-T1-L-D-A (1.27 mm) .050" SFC SERIES COST-EFFECTIVE RELIABLE SOCKET For complete specifications and recommended PCB layouts see www.samtec.com?SFC Insulator Material: Black Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating: 3.1 A per pin (2 pins powered) Voltage Rating: 350 VAC mated with TFC Operating Temp Range: -55 C to +125 C Insertion Depth: (3.05 mm) .120" to (4.06 mm) .160" Max Cycles: 10,000 with 30 " (0.76 m) Au RoHS Compliant: Yes (1.27 mm x 1.27 mm) .050" x .050" micro pitch High-reliability Tiger EyeTM LITE contacts Board Mates: TFC Cable Mates: TFSD, TFSDT SPECIFICATIONS Alignment pin option Slotted SMT tails HIGH-SPEED CHANNEL PERFORMANCE Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com PROCESSING SFC Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (04-25) (0.15 mm) .006" max (30-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) 1 8 Polarized G b p s NO. PINS PER ROW LEAD STYLE PLATING OPTION -T1 04, 05, 10, 15, 20, 25, 30, 35, 40, 45, 50 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality (Standard sizes) = Through-hole Tiger EyeTM LITE OPTION -A = Alignment Pin -F = Gold flash on contact, Matte Tin on tail -T2 = Surface Mount Tiger EyeTM LITE -K = (4.00 mm) .157" DIA Polyimide film Pick & Place Pad -L = 10 " (0.25 m) Gold on contact, Matte Tin on tail FILE NO. E111594 (2.03) .080 D (1.27) .050 x No. of Positions + (3.94) .155 except for alignment pin option: (1.27) .050 x No. of Positions + (3.17) .125 -TR = Tape & Reel (-T2 only) (1.27) .050 (1.27) .050 x No. of Positions + (0.38) .015 02 ALSO AVAILABLE (3.68) .145 (MOQ Required) (3.05) .120 (1.27) .050 TYP * Other sizes 01 (1.27) .050 (4.57) .180 Note: Some sizes, styles and options are non-standard, non-returnable. -A OPTION (0.58) .023 (0.13) .005 TYP (2.79) .110 (0.51) .020 (0.51) .020 (1.27) .050 DIA (1.59) .063 (3.05) .120 -T1 (0.13) .005 TYP (4.19) .165 -T2 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.