TD62304,305FB TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62304FB,TD62305FB 7CH LOW INPUT ACTIVE DARLINGTON SINK DRIVER The TD62304FB and TD62305FB are non-inverting transistor arrays, which are comprised of seven NPN darlington buffer-transistor output stages PNP input stages. These devices can be operated by source input voltage and are suitable for operations with a 5-V general purposed logic IC such as 5-V TTL, 5-V CMOS and 5-V Microprocessor which have sink current output drivers. Please observe the thermal condition for using. FEATURES Output current (single output) : 500 mA (Max.) High sustaining voltage : 35 V (Min.) Low level active input Weight: 0.16 g (Typ.) Inputs compatible with 5-V TTL and 5-V CMOS Package type-FB: SOP-16 pin PIN CONNECTION (TOP VIEW) SCHEMATICS (EACH DRIVER) TD62304FB TD62305FB Note: 1 The input and output parasitic diodes cannot be used as clamp diodes. 2001-07-16 TD62304,305FB MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT VCC -0.5~7.0 V VCE (SUS) -0.5~35 V Output Current IOUT 500 mA / ch Input Voltage VIN Input Current IIN -10 mA Power Dissipation PD 0.625 (Note 2) W Operating Temperature Topr -40~85 C Storage Temperature Tstg -55~150 C Supply Voltage Output Sustaining Voltage -22~VCC + 0.5 V -0.5~7 (Note 1) Note 1: On glass epoxy PCB (30 x 30 x 1.6 mm Cu 50%) Note 2: TD62305FB only RECOMMENDED OPERATING CONDITIONS (Ta = -40~85C) CHARACTERISTIC SYMBOL CONDITION MIN TYP. MAX UNIT VCC 4.5 5.5 V VCE (SUS) 0 35 V 0 400 Duty = 10% 0 240 Duty = 50% 0 60 -20 VCC 0 5.5 -22 VCC - 3.5 TD62305FB -0.5 VCC - 3.7 TD62304FB VCC - 0.4 VCC VCC - 0.6 VCC 0.325 Supply Voltage Output Sustaining Voltage DC 1 Circuit Tpw 25 ms Output Current IOUT 7 circuits Tj = 120C Ta = 85C (Note) Input Voltage Input Voltage (Outout On) Input Voltage (Outout Off) Power Dissipation Note: TD62304FB TD62305FB VIN TD62304FB VIN(ON) VIN(OFF) TD62305FB PD (Note) mA / ch V V V W On glass epoxy PCB (30 x 30 x 1.6 mm Cu 50%) 2 2001-07-16 TD62304,305FB ELECTRICAL CHARACTERISTICS (Ta = 25C) CHARACTERISTIC Output Leakage Current SYMBOL TEST CIR- CUIT ICEX 1 VCC = 5.5 V, VOUT = 35 V Ta = 85C, IIN = 0 2 VCC = 4.5 V, IOUT = 350 mA TEST CONDITION MIN TYP. MAX UNIT -100 A 1.4 2.0 1.4 2.2 VCC = 5.5 V, VIN = 0.4 V -0.32 -0.45 VCC = 5.5 V, VIN = -20 V -2.6 -40 VCC -2.8 VCC -3.7 VCC = 5.5 V, VIN = 0 V 17 22 mA VCC = VIN = 5.5 V 100 A VCC = 5 V, CL = 15 pF VOUT = 35 V, RL = 87.5 0.1 3 VIN = VIN (ON) Output Saturation Voltage VCE (sat) (Max.) VIN = 0.8 V Input Current Input Voltage (Output On) Supply Current (Output On) IIN (ON) 3 (Output Off) IIN (OFF) 4 TD62304FB VIN(ON) 5 TD62305FB (Output On) ICC (ON) (Output Off) ICC (OFF) Turn-On Delay tON Turn-Off Delay tOFF 6 7 3 V mA A V s 2001-07-16 TD62304,305FB TEST CIRCUIT 1. ICEX 2. VCE (sat) 3. IIN (ON) 4. IIN (OFF) 5. VIN (ON) 6. ICC 7. tON, tOFF Note 1: Pulse width 50 s, duty cycle 10% Output impedance 50 , tr 10 ns, tf 5 ns Note 2: CL includes probe and jig capacitance PRECAUTIONS for USING This IC does not include built-in protection circuits for excess current or overvoltage. If this IC is subjected to excess current or overvoltage, it may be destroyed. Hence, the utmost care must be taken when systems which incorporate this IC are designed.Utmost care is necessary in the design of the output line, VCC and GND line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding. 4 2001-07-16 TD62304,305FB 5 2001-07-16 TD62304,305FB PACKAGE DIMENSIONS SOP16-P-225-1.27B Unit : mm Weight: 0.16 g (Typ.) 6 2001-07-16 TD62304,305FB RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 7 2001-07-16