Film capacitors - AC capacitors Motor run capacitors 450 V; class B; 85 C Series/Type: B32330/B32332 - MotorCapTM Ordering code: Date: January 2008 Version: 2.0 Content of inside pages of data sheet. Data will be automatically entered into headers and footers. Please fill in the table and then change the colour to "White". This ensures that the table disappears for the customer pdf. Identification/Classification 1: (header 1) Film capacitors - AC capacitors Identification/Classification 2: (header 2) Motor run capacitors Ordering code: Series/Type: B32330/B32332 - MotorCapTM Preliminary data (optional): (if necessary) Department: FK PC PM AC Date: January 2008 (c) EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Film capacitors - AC capacitors Motor run capacitors B32330/B32332 - MotorCapTM Construction Dielectric: polypropylene film Aluminum can Soft polyurethane resin Features Self-healing properties Low dissipation factor Overpressure disconnection device Highest safety level P2 to IEC 60252-1 2001-02 High insulation resistance EN 60335 compliant Capacitor C US UL files E106388 VDE approval Typical applications For general sine wave applications, mainly as motor run capacitor Terminals B32330 series: Single fast on 6.3 x 0.8 mm B32332 series: Double fast on 6.3 x 0.8 mm Mounting parts (optional) Threaded stud at bottom of can (M8; max. torque = 5 Nm) Technical data and specifications Reference standards IEC 60252-1 2001-02, EN 60252 2001, UL 810 Safety class to IEC 60252-1 2001-02 P2 Life expectancy to IEC 60252 2001 450 V: 10000 h (class B) UL 810 file E106388 for Nashik and Gravatai plant Approved component 10000 AFC protected Rated capacitance CR 3.0 ... 60.0 F Tolerance 5% Rated voltage VR 450 V AC Rated frequency fR 50/60 Hz FK PC PM AC Please read the important notes, cautions and warnings. January 2008 Page 2 of 6 Film capacitors - AC capacitors Motor run capacitors B32330/B32332 - MotorCapTM Maximum ratings Maximum permissible voltage Vmax 1.1 * VR (VR = Rated voltage) Maximum permissible current Imax 1.3 * IR (IR = Rated current) Test data AC test voltage terminal to terminal VTT 2 * VR , 60 s (type test) 2 * VR , 2 s (routine test) Insulation voltage terminals to case 2000 V AC, 60s. (type test) 2000 V AC, 2s (routine test) Insulation resistance Rins or time constant at 20 C; rel. humidity 65% (minimum as-delivered values) 3000 s Dissipation factor tan at 20 C 1.0 *10-3 (120 Hz) Maximum rate of voltage rise dV/dtmax 10 V/s Climatic data Climatic category 25/085/21 to IEC 60068-1 Lower category Tmin -25 C Upper category Tmax +85 C Damp heat test ttest 21 days Mechanical and electrical properties of terminal top disk material Ball pressure test to IEC 60309-1 sec. 27.3 20 N at 125 C Top disk material OPTION A: UL 94 V2 compatible Self-extinguishing within 30 seconds of withdrawing glow wire Glow wire test to IEC 60695-2-11 Test temp 550 C for IR 0.5 A Test temp 850 C for IR > 0.5 A Option B: UL 94 V2/V0 compatible Glow wire test to IEC60335-1 / IEC 60695-2-11 Test temp 550 C / 750 C Self-extinguishing within 2 seconds of withdrawing glow wire Part is compatible to EN 60335-1 Tracking test to IEC 60112 solution A > 250 V FK PC PM AC Please read the important notes, cautions and warnings. January 2008 Page 3 of 6 Film capacitors - AC capacitors Motor run capacitors B32330/B32332 - MotorCapTM Compatibility to RoHS Compliance to directive 2002/95/EC Approvals VDE 450 V/85 C: 10000 h (class B) Approved See table for approved ratings C US UL 810 files E106388 See table for approved ratings Approved Component 10000 AFC up to 450 V Protected Dimensional drawings B32330/B32332 A 13 16 max. d1 2 Marking After Safety Device Operation L Marking Before Safety Device Operation M8 for o30-53 mm M12 for o63.5 mm According to DIN 6797-A According to DIN 934 M 8 bolt: M 12 bolt: KMK1156-A-E L = 12 mm L = 16 mm A = 5 mm for diameters d = 30, 35, 40, 45 mm A = 0 mm for diameters d = 50, 53, 63.5 mm FK PC PM AC Please read the important notes, cautions and warnings. January 2008 Page 4 of 6 Film capacitors - AC capacitors Motor run capacitors B32330/B32332 - MotorCapTM Ordering codes and packing units VR V AC CR F 450 V 3.0 4.0 5.0 6.0 7.0 7.5 8.0 10.0 12.0 12.5 15.0 16.0 18.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 Max. dimensions dxl mm 30 x 52 30 x 52 30 x 68 30 x 68 30 x 78 30 x 78 35 x 78 40 x 78 40 x 78 40 x 78 40 x 103 40 x 103 40 x 103 40 x 103 45 x 105 53 x 105 53 x 105 53 x 105 53 x 142 53 x 142 63.5 x 142 63.5 x 142 Composition of ordering code: *: terminals 0 - single fast on terminals 2 - double fast on terminals Ordering code Packing units B3233*B6305J0#1 B3233*B6405J0#1 B3233*B6505J0#0 B3233*B6605J0#0 B3233*B6705J0#0 B3233*B6755J0#0 B3233*B6805J0#0 B3233*B6106J0#0 B3233*B6126J0#0 B3233*B6126J5#0 B3233*B6156J0#0 B3233*B6166J0#0 B3233*B6186J0#0 B3233*B6206J0#0 B3233*B6256J0#0 B3233*B6306J0#0 B3233*B6356J0#0 B3233*B6406J0#0 B3233*B6456J0#0 B3233*B6506J0#0 B3233*B6556J0#0 B3233*B6606J0#0 pcs. 150 150 150 150 150 150 50 50 50 50 50 50 50 50 50 50 50 50 50 50 28 28 Approvals VDE Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes UL Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes #: construction of can and plastic top 5 - aluminum can, Option A: UL 94 V2 top 6 - Aluminum can, Option B: UL 94 V0 top/IEC 60335-1 7 - Aluminum can with M 8 bolt, Option A: UL 94 V2 top 8 - Aluminum can with M 8 bolt, Option B: UL 94 V0 top/IEC 60335-1 U Please read "Applications warning, installation and maintenance instructions" and the "General Safety Data Sheet for Power Capacitors" issued by ZVEI, which are available on the Internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are kindly requested to approve our product specifications or request our approval for your specification before ordering. FK PC PM AC Please read the important notes, cautions and warnings. January 2008 Page 5 of 6 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. FK PC PM AC January 2008 Page 6 of 6