Data sheet W-Series WDU 4N Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Klippon(R) Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon(R) Connect provides a proven response to a range of different requirements. General ordering data Type Order No. Version GTIN (EAN) Qty. WDU 4N 1042600000 Feed-through terminal, Screw connection, 4 mm, 500 V, 32 A, Dark Beige 4032248273218 100 pc(s). Creation date November 7, 2018 2:13:53 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1 Data sheet W-Series WDU 4N Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width Height Depth Depth including DIN rail 6.1 mm 44 mm 37.7 mm 38.5 mm Width (inches) Height (inches) Depth (inches) Net weight 0.24 inch 1.732 inch 1.484 inch 6.35 g -60 C Continuous operating temp., max. 130 C Wemid V-0 Colour Dark Beige DEMKO14ATEX1338U 352 V 4 mm 31 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 31 A 352 V 4 mm Screw connection, for plug-in cross-connector, One end without connector Yes 1 1 No No No Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function 0.5...1 Nm 1 2 No TS 35 No No right Number of similar terminals Type of mounting 1 Snap-on 200039-1057876 10 A 300 V 26 AWG Current size B (CSA) Voltage size B (CSA) Wire cross section max. (CSA) 10 A 300 V 10 AWG Temperatures Continuous operating temp., min. Material data Material UL 94 flammability rating Rating data IECEx/ATEX Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label Ex eb II C Gb System specifications Version End cover plate required Number of levels Number of potentials per tier PE connection N-function PEN function Additional technical data Explosion-tested version Open sides CSA rating data Certificate No. (CSA) Current size D (CSA) Voltage size D (CSA) Wire cross section min. (CSA) Creation date November 7, 2018 2:13:53 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2 Data sheet W-Series WDU 4N Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection) Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Torque level with DMS electric screwdriver Twin wire-end ferrules, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max. 0.6 x 3.5 mm 0.13 mm 6 mm on side 2 1 Nm 2 0.5 mm AWG 10 4 mm 0.5 mm 0.5 mm 6 mm Clamping range, max. 6 mm Clamping screw M3 Connection cross-section, stranded, min. 1.5 mm Gauge to IEC 60947-1 A4 Stripping length 11 mm Tightening torque, min. 0.5 Nm Twin wire-end ferrules, max. 1.5 mm Type of connection Screw connection Wire connection cross section AWG, min. AWG 26 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 4 mm Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 4 mm Wire connection cross-section, finely stranded, min. 0.5 mm Wire connection cross-section, solid core, min. 0.5 mm Rating data Rated cross-section Rated current Standards Rated impulse withstand voltage 4 mm 32 A IEC 60947-7-1 6 kV Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity 500 V 39 A 1 m 3 UL rating data Certificate No. (cURus) E60693 Conductor size Factory wiring min. (cURus) 26 AWG Conductor size Field wiring min. (cURus) 26 AWG Current size D (cURus) 10 A Voltage size D (cURus) 300 V Conductor size Factory wiring max. (cURus) 10 AWG Conductor size Field wiring max. (cURus) 10 AWG Current size B (cURus) 10 A Voltage size B (cURus) 300 V Classifications ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1 EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20 ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0 EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Product information Instructions for accessories Cross-connections, see section "W series accessories". Creation date November 7, 2018 2:13:53 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3 Data sheet W-Series WDU 4N Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation CFAT_WDU 4N.pdf IECEXULD14.0005U_e.pdf DE_PT1001_20160418_803_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP NTI_IECEx_WDU-WPE 4N.pdf Safety note Safety notice Safety Information Creation date November 7, 2018 2:13:53 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4 Data sheet W-Series WDU 4N Drawings Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 7, 2018 2:13:53 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5