General-Purpose DAQ PCI-9113A 32-CH 12-Bit 100 kS/s Isolated Analog Input Card Introduction ADLINK's PCI-9113A is a 32-CH, 12-bit, 100 kS/s isolated analog input card. The PCI-9113A provides analog inputs with 3 programmable input ranges for both bipolar and unipolar inputs. The 32-CH single-ended analog inputs can be converted to 16-CH differential analog inputs, which improves the noise rejection in harsh industrial environments. The analog inputs are isolated from the PC's system ground. This feature not only protects the PC from being damaged from surges on the signal lines, but also eliminates ground loops and common-mode problems commonly seen in industrial measurement applications. The PCI-9113A provides custom circuit area for input signal conditioning. Either signal attenuation or filtering can be applied on per channel basis. With all the features, ADLINK PCI-9113A delivers cost-effective and reliable data acquisition capabilities for ATE, sensor monitoring, data logging, power transmission, and a broad variety of industrial measurement applications. Features Supports a 32-bit 5 V PCI bus 12-bit A/D resolution Up to 100 kS/s sampling rate 32-CH single-ended or 16-CH differential inputs Onboard 1 k-sample A/D FIFO Bipolar or unipolar analog input ranges Programmable gains of x1, x10, x100 Automatic analog inputs scanning Onboard low-pass filtering capability for analog inputs 2500 VRMS optical isolation Compact, half-size PCB Operating Systems * Windows 7/Vista/XP/2000/2003 Server * Linux Recommended Software * AD-Logger Specifications Analog Input Number of channels: 32 single-ended or 16 differential Resolution: 12 bits Conversion time: 8 s Maximum sampling rate: 100 kS/s Input signal ranges Input Range Gain 1 10 100 * VB.NET/VC.NET/VB/VC++/BCB/Delphi * DAQBench Driver Support Terminal Boards & Cables Bipolar 10 V 5 V 1 V 0.5 V 0.1 V 0.05 V Accuracy: 0.01% of FSR 1 LSB Input coupling: DC Overvoltage protection: continuous 35 V Input impedance: 1 G Trigger modes: software, pacer FIFO buffer size: 1 k samples Data transfers: polling, interrupt Isolation Voltage: 2500 VRMS General Specifications * DAQPilot for LabVIEWTM I/O connector: 37-pin D-sub female * DAQ-MTLB for MATLAB(R) Operating temperature: 0C to 55C Storage temperature: -20C to 80C * PCIS-DASK for Windows * PCIS-DASK/X for Linux Unipolar 0 to 10 V 0 to 1 V 0 to 0.1 V Relative humidity: 5% to 95%, non-condensing Power requirements +5 V 960 mA typical Dimensions (not including connectors) 173 mm x 107 mm Updated 03-28, 2012. (c)2012 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. DIN-37D-01 Terminal Board with One 37-pin D-sub Connector and DIN-Rail Mounting (Cables are not included.) ACLD-9137-01 General-Purpose Terminal Board with One 37-pin D-sub Male Connector ACL-10137-1MM 37-pin D-sub male/male cable, 1 M ACL-10137-1MF 37-pin D-sub male/female cable, 1 M * For more information on mating cables, please refer to P2-61/62. Ordering Information PCI-9113A 32-CH 12-Bit 100 kS/s Isolated Analog Input Card Pin Assignment AI0 (AIH0) AI2 (AIH2) AI4 (AIH4) AI6 (AIH6) AI8 (AIH8) AI10 (AIH10) AI12 (AIH12) AI14 (AIH14) IGND IGND AI16 (AIL0) AI18 (AIL2) AI20 (AIL4) AI22 (AIL6) AI24 (AIL8) AI26 (AIL10) AI28 (AIL12) AI30 (AIL14) IGND 1 20 2 21 3 22 4 23 5 24 6 25 7 26 8 27 9 28 10 29 11 30 12 31 13 32 14 33 15 34 16 35 17 36 18 37 (AIH1) AI1 (AIH3) AI3 (AIH5) AI5 (AIH7) AI7 (AIH9) AI9 (AIH11) AI11 (AIH13) AI13 (AIH15) AI15 IGND IGND (AIL1) AI17 (AIL3) AI19 (AIL5) AI21 (AIL7) AI23 (AIL9) AI25 (AIL11) AI27 (AIL13) AI29 (AIL15) AI31 19 www.adlinktech.com 2-30 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ADLINK Technology: PCI-9113A