2-30
www.adlinktech.com
Introduction
ADLINK’s PCI-9113A is a 32-CH, 12-bit, 100 kS/s isolated analog input card. The PCI-9113A provides analog
inputs with 3 programmable input ranges for both bipolar and unipolar inputs. The 32-CH single-ended analog
inputs can be converted to 16-CH differential analog inputs, which improves the noise rejection in harsh
industrial environments.
The analog inputs are isolated from the PC's system ground. This feature not only protects the PC from being
damaged from surges on the signal lines, but also eliminates ground loops and common-mode problems
commonly seen in industrial measurement applications.
The PCI-9113A provides custom circuit area for input signal conditioning. Either signal attenuation or filtering
can be applied on per channel basis. With all the features, ADLINK PCI-9113A delivers cost-effective and
reliable data acquisition capabilities for ATE, sensor monitoring, data logging, power transmission, and a broad
variety of industrial measurement applications.
Features
■ Supports a 32-bit 5 V PCI bus
■ 12-bit A/D resolution
■ Up to 100 kS/s sampling rate
■ 32-CH single-ended or 16-CH differential inputs
■ Onboard 1 k-sample A/D FIFO
■ Bipolar or unipolar analog input ranges
■ Programmablegainsofx1,x10,x100
■ Automatic analog inputs scanning
■ Onboard low-pass filtering capability for analog inputs
■ 2500 VRMS optical isolation
■ Compact,half-sizePCB
■ Operating Systems
• Windows 7/Vista/XP/2000/2003 Server
• Linux
■ Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■ Driver Support
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB
®
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux
32-CH 12-Bit 100 kS/s Isolated Analog Input Card
PCI-9113A
Terminal Boards & Cables
■ DIN-37D-01
Terminal Board with One 37-pin D-sub Connector
and DIN-Rail Mounting (Cables are not included.)
■ ACLD-9137-01
General-Purpose Terminal Board with One
37-pin D-sub Male Connector
■ ACL-10137-1MM
37-pin D-sub male/male cable, 1 M
■ ACL-10137-1MF
37-pin D-sub male/female cable, 1 M
* For more information on mating cables, please refer to
P2-61/62.
Ordering Information
■ PCI-9113A
32-CH 12-Bit 100 kS/s Isolated Analog Input Card
+5 V
960 mA typical
±10 V
±1 V
±0.1 V
Unipolar
0 to 10 V
0 to 1 V
0 to 0.1 V
Input Range
Gain
1
10
100
±5 V
±0.5 V
±0.05 V
Bipolar
Pin Assignment
AI0 (AIH0)
AI2 (AIH2)
AI4 (AIH4)
AI6 (AIH6)
AI8 (AIH8)
AI10 (AIH10)
AI12 (AIH12)
AI14 (AIH14)
IGND
IGND
AI16 (AIL0)
AI18 (AIL2)
AI20 (AIL4)
AI22 (AIL6)
AI24 (AIL8)
AI26 (AIL10)
AI28 (AIL12)
AI30 (AIL14)
IGND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
(AIH1) AI1
(AIH3) AI3
(AIH5) AI5
(AIH7) AI7
(AIH9) AI9
(AIH11) AI11
(AIH13) AI13
(AIH15) AI15
IGND
IGND
(AIL1) AI17
(AIL3) AI19
(AIL5) AI21
(AIL7) AI23
(AIL9) AI25
(AIL11) AI27
(AIL13) AI29
(AIL15) AI31
General-Purpose DAQ
Specifications
Analog Input
■
Number of channels: 32 single-ended or 16
differential
■
Resolution: 12 bits
■
Conversion time: 8 μs
■
Maximum sampling rate: 100 kS/s
■
Input signal ranges
■
Accuracy: 0.01% of FSR ± 1 LSB
■
Input coupling: DC
■
Overvoltage protection: continuous ±35 V
■
Input impedance: 1 GΩ
■
Trigger modes: software, pacer
■
FIFO buffer size: 1 k samples
■
Data transfers: polling, interrupt
■
Isolation Voltage: 2500 VRMS
General Specifications
■
I/O connector: 37-pin D-sub female
■
Operating temperature: 0˚C to 55˚C
■
Storage temperature: -20˚C to 80˚C
■
Relative humidity: 5% to 95%, non-condensing
■
Power requirements
■
Dimensions (not including connectors)
173 mm x 107 mm
Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specications are subject to change without further notice.
Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specications are subject to change without further notice.
