IL PB BK DP/V1-PAC Order No.: 2862246
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2862246
PHOENIX CONTACT Deutschland GmbH Page 4 / 6
http://www.phoenixcontact.de Feb 8, 2011
2313672 SUBCON-PLUS-PROFIB/90/IDC D-SUB connector, 9-pos., male connector, cable entry < 90°, bus
system: PROFIBUS DP up to 12 Mbps, termination resistor can
be switched on via slide switch, pin assignment: 3, 5, 6, 8; IDC
terminal block connection
2313685 SUBCON-PLUS-PROFIB/90/PG/
IDC
D-SUB connector, 9-pos., male connector, cable entry < 90°, bus
system: PROFIBUS DP up to 12 Mbps with PG D-SUB female
connector for connecting a programming device, termination
resistor can be switched on via slide switch, pin assignment: 3, 5,
6, 8; IDC terminal block connection
2313708 SUBCON-PLUS-PROFIB/90/PG/
SC
D-SUB connector, 9-pos., male connector, cable entry < 90°, bus
system: PROFIBUS DP up to 12 Mbps with PG D-SUB female
connector for connecting a programming device, termination
resistor can be switched on via slide switch, pin assignment: 3, 5,
6, 8; screw connection terminal blocks
2313698 SUBCON-PLUS-PROFIB/90/SC D-SUB connector, 9-pos., male connector, cable entry < 90°, bus
system: PROFIBUS DP up to 12 Mbps, termination resistor can
be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw
connection terminal blocks
2744380 SUBCON-PLUS-PROFIB/AX/SC D-SUB connector, 9-pos., male connector, axial version with
two cable entries, bus system: PROFIBUS DP up to 12 Mbps,
termination resistor can be switched on via slide switch, pin
assignment: 3, 5, 6, 8; screw connection terminal blocks
2708245 SUBCON-PLUS-PROFIB/PG/
SC2
D-SUB connector, 9-pos., male connector, cable entry < 35°, bus
system: PROFIBUS DP up to 12 Mbps with PG D-SUB female
connector for connecting a programming device, termination
resistor can be switched on via slide switch, pin assignment: 3, 5,
6, 8; screw connection terminal blocks
2708232 SUBCON-PLUS-PROFIB/SC2 D-SUB connector, 9-pos., male connector, cable entry < 35°, bus
system: PROFIBUS DP up to 12 Mbps, termination resistor can
be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw
connection terminal blocks
Diagrams/Drawings
Connection diagram