Product Specification PE42440 SP4T UltraCMOSTM RF Switch 50 - 3000 MHz Product Description The PE42440 is a HaRPTM-enhanced SP4T RF Switch developed on the UltraCMOSTM process technology. This general-purpose switch contains 4 identical RF ports and can be used in a multitude of applications up to 3000 MHz. It integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface and requires no DC blocking capacitors. This RoHS-compliant part is available in a standard 3x3x0.75mm QFN package. Peregrine's HaRPTM technology enhancements deliver high linearity and exceptional harmonics performance. It is an innovative feature of the UltraCMOSTM process, providing performance superior to GaAs with the economy and integration of conventional CMOS. Features * HaRPTM - enhanced Technology for Unparalleled Linearity * Very Low Insertion Loss: 0.45 dB @ 1000 MHz, 0.5 dB @ 2000 MHz * Very high isolation: 34 dB @ 1000 MHz, 28 dB @ 2000 MHz * Exceptionally high ESD tolerance: * Class 3 (4.0 kV HBM) on RFC pin * Class 2 (2.0 kV HBM) on all pins * Integrated decoder for 2-pin control * Accepts 1.8V and 2.75V control logic levels * Low 4.5 ohm series ON resistance * No blocking capacitors required Figure 2. Package Type Figure 1. Functional Diagram 16-lead 3x3 mm QFN RFC ESD RF3 RF1 ESD ESD ESD ESD RF4 RF2 CMOS Control/Driver and ESD CTRL CTRL Vdd Document No. 70-0294-01 www.psemi.com (c)2009 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 9 PE42440 Product Specification Table 1. Electrical Specifications: Temp = 25C, VDD = 2.75 V (ZS = ZL = 50 ) Parameter Condition Min Operational Frequency Insertion Loss (RFC - RFX) Return Loss (RFC - RFX, Active Ports) Isolation (RFC - RFX) Typ 50 Max Units 3000 MHz 50 MHz - 1000 MHz - 0.45 0.65 dB 1000 MHz - 2000 MHz - 0.5 0.7 dB 2000 MHz - 3000 MHz - 0.85 1.15 dB 50 MHz - 1000 MHz - 22 - dB 1000 MHz - 2000 MHz - 15 - dB 2000 MHz - 3000 MHz - 11 - dB 50 MHz - 1000 MHz 31 34 - dB 1000 MHz - 2000 MHz 25 28 - dB 2000 MHz - 3000 MHz 20 22 - dB Input IP2 50 - 3000 MHz, +18dBm per tone, 1MHz spacing 96 dBm Input IP3 50 - 3000 MHz, +18dBm per tone, 1MHz spacing 67 dBm P1dB1 50 - 3000 MHz 41.5 dBm Switching time 50% CNTL to 10/90% of RF 2 s Note: 1. Please refer to Maximum Operating Pin (50) in Table 4 Table 2. Electrical Specifications, Worst Case Conditions: Temp = 85C, VDD = 2.65 V (ZS = ZL = 50 ) Parameter Condition Min Operational Frequency 50 50 MHz - 1000 MHz Insertion Loss (RFC - RFX) Return Loss (RFC - RFX, Active Ports) Isolation (RFC - RFX) Typ Max Units 3000 MHz 0.65 dB - 0.5 1000 MHz - 2000 MHz - 0.65 0.75 dB 2000 MHz - 3000 MHz - 1.0 1.25 dB 50 MHz - 1000 MHz - 21 - dB 1000 MHz - 2000 MHz - 15 - dB 2000 MHz - 3000 MHz - 10 - dB 50 MHz - 1000 MHz 30 32 - dB 1000 MHz - 2000 MHz 24 26 - dB 2000 MHz - 3000 MHz 20 22 - dB Input IP2 50 - 3000 MHz, +18dBm per tone, 1MHz spacing 95 dBm Input IP3 50 - 3000 MHz, +18dBm per tone, 1MHz spacing 66 dBm P1dB2 50 - 3000 MHz 41 dBm Switching time 50% CNTL to 10/90% of RF 2 s Note: 2. Please refer to Maximum Operating Pin (50) in Table 4 (c)2009 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 9 Document No. 70-0294-01 UltraCMOSTM RFIC Solutions PE42440 Product Specification GND RF1 VDD 13 14 RF3 4 8 V1 7 3 RF4 V2 Table 5. Absolute Maximum Ratings Symbol Exposed Ground Paddle GND 2 6 VDD 5 1 GND GND 15 16 N/C Pin 1 RF2 Figure 3. Pin Configuration (Top View) 12 GND 11 RFC 10 GND 9 GND VI Min Max Units Power supply voltage -0.3 4.0 V Voltage on any DC input -0.3 VDD+ 0.3 V +28 +33 dBm dBm HBM5 ESD Voltage, RFC pin 4000 V HBM5 ESD Voltage, all pins 2000 V MM ESD Voltage, RFC pin 300 V MM ESD Voltage, all pins 100 V RF input power PIN(50 )4 (50-500 MHz) (500-3000 MHz) VESD Table 3. Pin Descriptions Pin No. 1 Parameter/Conditions Note: 4. VDD within operating range specified in Table 3. 5. ESD Voltage (HBM, MIL-STD-883 Method 3015.7) Pin Name GND Description Ground 2 VDD Supply 3 V2 Switch control input, CMOS logic level 4 V1 Switch control input, CMOS logic level 5 GND Ground 6 RF43 RF Port 4 7 GND Ground 8 3 RF3 RF Port 3 9 GND Ground 10 GND Ground Path V2 V1 0 0 Exceeding absolute maximum ratings may cause permanent damage. Operation should be restricted to the limits in the Operating Ranges table. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability. Table 6. Truth Table 11 RFC3 RF Common RFC - RF1 12 GND Ground RFC - RF2 1 0 13 3 RF Port 1 RFC - RF3 0 1 RFC - RF4 1 1 RF1 14 GND Ground 15 RF23 RF Port 2 16 N/C No Connect Electrostatic Discharge (ESD) Precautions Paddle GND Exposed ground paddle When handling this UltraCMOSTM device, observe the same precautions that you would use with other ESDsensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the specified rating. Note: 3. All RF pins must be DC blocked with an external series capacitor or held at 0 VDC. Table 4. Operating Ranges Parameter Symbol Min Typ Max Units VDD Supply Voltage VDD 2.65 2.75 IDD Power Supply Current (VDD = 2.75 V) IDD RF input power (50 ) (50-500 MHz) (500-3000 MHz) PIN Control Voltage High VIH Control Voltage Low VIL Temperature range TOP -40 +25 Storage Temperature Range TST -65 13 3.3 V 50 A +28 +33 dBm dBm Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOSTM devices are immune to latch-up. Moisture Sensitivity Level V The Moisture Sensitivity Level rating for the PE42440 in the 16-lead 3x3 QFN package is MSL1. 0.4 V Switching Frequency +85 C The PE42440 has a maximum 25 kHz switching rate. +25 +160 C 1.4 Document No. 70-0294-01 www.psemi.com (c)2009 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 9 PE42440 Product Specification Figure 4. Evaluation Board Layouts Evaluation Kit Peregrine Specification 101/0287 The SP4T switch EK Board was designed to ease customer evaluation of Peregrine's PE42440. The RF common port is connected through a 50 transmission line via the top SMA connector, J1. RF1, RF2, RF3 and RF4 are connected through 50 transmission lines via SMA connectors J3, J5, J2 and J4, respectively. A through 50 transmission is available via SMA connectors J6 and J7. This transmission line can be used to estimate the loss of the PCB over the environmental conditions being evaluated. The board is constructed of a four metal layer FR4 material with a total thickness of 62 mils. The middle layers provide ground for the transmission lines. The transmission lines were designed using a coplanar waveguide with ground plane model using a trace width of 32 mils, trace gaps of 25 mils, and metal thickness of 2.1 mils. Figure 5. Evaluation Board Schematic Peregrine Specification 102/0339 1 9 RF3 8 GND 7 RF4 6 GND 5 J4 SMASM RF4 1 2 V1 V2 1 2 GND GND 10 11 ANT RF3 4 GND 3 16 U1 QFN50P3X3-16P VDD RF2 GND RF2 GND 15 2 J5 SMASM 1 J2 SMASM RF1 14 2 13 GND RF1 2 J3 SMASM 1 12 ANT 1 J1 SMASM 2 J8 HEADER 14 13 11 9 7 5 3 1 13 11 9 7 VDD 5 3 V2 1 V1 C4 DNI R2 1M R1 1M C3 DNI Unlabeled Test Line (c)2009 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 9 C2 DNI C1 DNI J6 SMASM 1 Through Line J7 SMASM 1 2 14 12 10 8 6 4 2 2 14 12 10 8 6 4 2 Document No. 70-0294-01 UltraCMOSTM RFIC Solutions PE42440 Product Specification Figure 6. Insertion Loss: RFC-RF @ 25 C Figure 7. Insertion Loss: RFC-RF @ 2.75 V Figure 8. Isolation: RFC-RF @ 25 C Figure 9. Isolation: RFC-RF @ 2.75 V Document No. 70-0294-01 www.psemi.com (c)2009 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 9 PE42440 Product Specification Figure 10. Return Loss at active port @ 25 C (c)2009 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 9 Figure 11. Return Loss at active port @ 2.75 V Document No. 70-0294-01 UltraCMOSTM RFIC Solutions PE42440 Product Specification Figure 12. Package Drawing 16-lead 3x3mm QFN: 19-0128-01 QFN 3x3 mm A MAX 0.800 NOM 0.750 MIN 0.700 Figure 13. Marking Specifications 42440 YYWW ZZZZZ YYWW = Date Code ZZZZZ = Last five digits of Lot Number Document No. 70-0294-01 www.psemi.com (c)2009 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 9 PE42440 Product Specification Figure 14. Tape and Reel Specifications 16-lead 3x3 mm QFN Tape Feed Direction Pin 1 Top of Device Device Orientation in Tape Table 7. Ordering Information Order Code Part Marking Description Package Shipping Method PE42440MLIBA 42440 PE42440G-16QFN 3x3mm-loose or cut tape Green 16-lead 3x3mm QFN Loose or cut tape PE42440MLIBA-Z 42440 PE42440G-16QFN 3x3mm-3000C Green 16-lead 3x3mm QFN 3000 units / T&R EK42440-01 PE42440-EK PE42440-16QFN 3x3mm-EK Evaluation Kit 1 / Box (c)2009 Peregrine Semiconductor Corp. All rights reserved. Page 8 of 9 Document No. 70-0294-01 UltraCMOSTM RFIC Solutions PE42440 Product Specification Sales Offices The Americas Peregrine Semiconductor Corporation Peregrine Semiconductor, Asia Pacific (APAC) 9380 Carroll Park Drive San Diego, CA 92121 Tel: 858-731-9400 Fax: 858-731-9499 Shanghai, 200040, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652 Europe Peregrine Semiconductor Europe Batiment Maine 13-15 rue des Quatre Vents F-92380 Garches, France Tel: +33-1-4741-9173 Fax : +33-1-4741-9173 High-Reliability and Defense Products Peregrine Semiconductor, Korea #B-2607, Kolon Tripolis, 210 Geumgok-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-943 South Korea Tel: +82-31-728-3939 Fax: +82-31-728-3940 Peregrine Semiconductor K.K., Japan Teikoku Hotel Tower 10B-6 1-1-1 Uchisaiwai-cho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213 Americas San Diego, CA, USA Phone: 858-731-9475 Fax: 848-731-9499 Europe/Asia-Pacific Aix-En-Provence Cedex 3, France Phone: +33-4-4239-3361 Fax: +33-4-4239-7227 For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). Document No. 70-0294-01 www.psemi.com The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS, HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. (c)2009 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 9