B39358-X6753-M100 - EPCOS AG

EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures

hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

SAW Components

SAW bandpass filter

Bandpass filters for terrestrial TV applications

Series/type:

Ordering code: X 6753 M

B39358-X6753-M100

Date:

Version: February 17, 2006

2.0

2February 17, 2006

X 6753 M

35.825 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW bandpass filter

Data sheet

Application

■Bandpass filters for terrestrial TV applications

■Usable bandwidth 7.5 MHz

Features

■Plastic package SIP5K

■Approximate weight 1.0 g

■RoHS compatible

■Tinned CuFe alloy terminals

Pin configuration

■1 Input

■2 Input - ground

■3 Chip carrier - ground

■4 Output

■5 Output

3February 17, 2006

X 6753 M

35.825 MHz

SAW Components

SAW bandpass filter

Data sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Characteristics

Reference temperature: TA= 25 ˚C

Terminating source impedance: ZS= 50 Ω

Terminating load impedance: ZL= 2 kΩ||3pF

min. typ.

@ 25 ˚C max.

Insertion attenuation α

Reference level for the 35.825 MHz 18.3 19.8 21.3 dB

following data

Pass bandwith

αrel ≤1dB B

1dB — 7.2 — MHz

αrel ≤3 dB B3dB — 7.5 — MHz

αrel ≤30 dB B30dB — 8.6 — MHz

Relative attenuation αrel

32.40 MHz 0.0 1.0 2.0 dB

39.63 MHz 0.4 1.4 2.4 dB

39.83 MHz 2.7 3.9 5.1 dB

31.90 MHz — 16.7 — dB

30.90 MHz 38.0 47.0 — dB

40.40 MHz 27.0 32.0 — dB

40.90 MHz 34.0 43.0 — dB

41.40 MHz 36.0 44.0 — dB

Lower sidelobe 25.00 ... 30.90 MHz 34.0 39.0 — dB

Upper sidelobe 40.90 ... 50.00 MHz 31.0 38.0 — dB

Reflected wave signal suppression

1.2 µs ... 6.0 µs after main pulse 40.0 49.0 — dB

(test pulse 250 ns,

carrier frequency 35.825 MHz)

Feedthrough signal suppression

1.4 µs ... 1.3 µs before main pulse — 50.0 — dB

(test pulse 250 ns,

carrier frequency 35.825 MHz)

Group delay ripple (p-p) ∆t

32.40 ... 39.63 MHz — 50 — ns

Impedance at 35.825 MHz

Input:

IN =R

IN ||

IN — 2.4||16.9 — kΩ || pF

Output:

OUT =R

OUT ||

OUT —1.9|| 4.8 —kΩ || pF

Temperature coefficient of frequency TCf— –72 — ppm/K

4February 17, 2006

X 6753 M

35.825 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW bandpass filter

Data sheet

Maximum ratings

Operable temperature range T –25 / +65 ˚C

Storage temperature range Tstg –40 / +85 ˚C

DC voltage VDC 5 V between any terminals

AC voltage Vpp 10 V between any terminals

5February 17, 2006

X 6753 M

35.825 MHz

SAW Components

SAW bandpass filter

Data sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Frequency response

6February 17, 2006

X 6753 M

35.825 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW bandpass filter

Data sheet

Frequency response

Time domain response

7February 17, 2006

X 6753 M

35.825 MHz

SAW Components

SAW bandpass filter

Data sheet

Please read

cautions and warnings and

important notes

at the end of this document.

References

Type X 6753 M

Ordering code B39358-X6753-M100

Marking and package C61157-A1-A15

Packaging F61074-V8067-Z000

Date codes L_1126

S-parameters X6753M_NB.s4p

Soldering profile S_6001

RoHS compatible defined as compatible with the following documents:

"DIRECTIVE2002/95/ECOFTHEEUROPEANPARLIAMENT

AND OF THE COUNCIL of 27 January 2003 on the restriction

of the use of certain hazardous substances in electrical and

electronic equipment. 2005/618/EC from April 18th, 2005,

amending Directive 2002/95/EC of the European Parliament

and of the Council for the purposes of establishing the maxi-

mumconcentration valuesfor certainhazardous substancesin

electrical and electronic equipment."

For further information please contact your local EPCOS sales office or visit our webpage at

ww.epcos.com .

Published by EPCOS AG

Surface Acoustic Wave Components Division

P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2006. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

he international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

he type in question please also contact one of our Sales Offices.

8February 17, 2006

Important notes

he following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether an EPCOS product with the properties

described in the product speciﬁcation is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic compo-

nents or failure before the end of their usual service life cannot be completely ruled

out in the current state of the art, even if they are operated as speciﬁed. In customer

applications requiring a very high level of operational safety and especially in customer appli-

cations in which the malfunction or failure of a passive electronic component could endanger

human life or health (e.g. in accident prevention or life-saving systems), it must therefore be

ensured by means of suitable design of the customer application or other action taken by the

customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is

sustained by third parties in the event of malfunction or failure of a passive electronic compo-

nent.

3. The warnings, cautions and product-speciﬁc notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as “hazardous”). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales ofﬁces.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

speciﬁcations. Please check therefore to what extent product descriptions and speciﬁcations

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Conse-

quently, we cannot guarantee that all products named in this publication will always be avail-

able.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the “General Terms of Delivery for Products and Services in the Electrical

Industry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, Silver-

Cap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered

or pending in Europe and in other countries. Further information will be found on the Internet

at www.epcos.com/trademarks.