AXK(1) NARROW-PITCH CONNECTORS -- DIRECT TYPE -- NARROW-PITCH CONNECTORS FOR BOARD-ON BOARD CONNECTIONS APPLICATIONS Cellular phones, PHS, PDAs and other small portable devices. SIL terminal DIL terminal FEATURES * What is meant by "direct type" connector? Using this connector, the terminal part is mounted on the PC board (B in the figure below) by soldering, the contact part, is pressed to the pattern on the PC board (A in the figure below) and stacking connection performed. LCD display SIL terminal FPC Ho dowld n , ,, , , ,, , , , 1. An ultra thin, lightweight PC board to PC board space of max. 0.1 mm is realized. Contributes to miniaturization of equipment. An effective stacking height of 0.4 mm and weight of 0.05 g is realized (with a pitch between SIL terminals of 1.4 mm and 8 contacts). 2. With bellows type contact construction, a large spring stroke is maintained, and the corresponding stacking capacity is increased. 3. Automatic assembly and reduction in part runs is possible, providing a total cost reduction. Compared to rubber connectors, the number of parts and mounting costs can be reduced. 4. For twin contact construction, the SIL terminal realizes a high contact reliability. Also, the 1.0 mm terminal pitch type supports single-contact types for light loads with leeway in positioning when assembling the device. * Example of connection between PC board and LCD display of cellular phone Contact part Pattern PC board B Effective stacking height (Min.) Effective stacking height A Stacking height Min. 0.4 mm Terminal part ,, , , DIL terminal B Contact part Pattern A Terminal part PRODUCT TYPES Terminal layout Terminal pitch Recommended stacking height Effective stacking height No. of contacts 14 15 0.8mm 0.6mm to 1.0mm 18 1.0mm 1.25mm SIL terminal 1.1mm 1.05mm to 1.4mm 1.45mm 1.25mm to 1.6mm 1.15mm 0.95mm to 1.3mm 1.35mm 1.15mm to 1.5mm 0.4mm to 0.8mm 1.4mm DIL terminal 3.5mm 1.0mm 17 0.6mm 0.65mm 0.95mm 3.4mm 0.45mm to 0.8mm 0.5mm to 0.8mm 0.7mm to 1.1mm 3.35mm to 3.6mm 10 12 12 13 18 12 18 8 14 15 20 2 20 Contact tip Part No. Twin Twin Twin Single Single Twin Single Twin Twin Single Twin Twin Twin Twin Twin Twin Twin Twin Single AXK1114355J AXK1115355J AXK1117335J AXK1117375J AXK1118375J AXK1110535J AXK1110575J AXK1112535J AXK1112735J AXK1113775J AXK1418635J AXK1412835J AXK1418835J AXK1208435J AXK1214435J AXK1215435J AXK1220435J AXK1302235J AXK120185P Packing quantity Inner carton (1 reel) Outer carton 3,500 pcs. 7,000 pcs. 3,500 pcs. 7,000 pcs. 3,500 pcs. 7,000 pcs. 3,500 pcs. 7,000 pcs. 3,500 pcs. 7,000 pcs. 3,000 pcs. 6,000 pcs. 3,000 pcs. 6,000 pcs. 3,000 pcs. 6,000 pcs. 3,000 pcs. 6,000 pcs. 3,000 pcs. 6,000 pcs. 3,000 pcs. 6,000 pcs. 3,000 pcs. 6,000 pcs. 3,000 pcs. 6,000 pcs. 4,000 pcs. 8,000 pcs. 4,000 pcs. 8,000 pcs. 4,000 pcs. 8,000 pcs. 4,000 pcs. 8,000 pcs. 3,000 pcs. 6,000 pcs. 1,000 pcs. 2,000 pcs. 45 AXK(1) SPECIFICATIONS 1. Characteristics 1) SIL terminal (terminal pith 1.0mm, 1.1mm) Item Electrical characteristics Mechanical characteristics Specifications Terminal pitch 1.0mm Rated current Rated voltage Breakdown voltage Insulation resistance Contact resistance Contact force (Note) 250V AC for 1 minute Detection current: 1mA Min. 1,000M (initial) Using 500V DC megger (applied for 1min.) Measured based on the HP4338B measurement method of JIS C 5402. Max. 50m 14, 15, 17 contacts twin connection: +15 0.637+0.147 -0.098 N{65 -10gf}/2 points 10, 12 contacts twin connection: +15 0.441+0.147 -0.098N{45 -10gf}/2 points 10, 13, 17, 18 contacts single connection: +15 0.441+0.147 -0.098N{45 -10gf}/1 point +15 0.441+0.147 -0.098 N{45 -10gf}/2 points -55C to +85C No freezing at low temperature Max. peak temperature of 245C Soldering heat resistance 300C within 5 seconds/350C within 3 seconds Environmental characteristics Thermal shock resistance (header and socket mated) Insertion and removal life Conditions 0.5A 60V AC/DC Ambient temperature Lifetime characteristics Unit weight Terminal pitch 1.1mm 5 cycles, insulation resistance Min. 100M, contact resistance Max. 50m 50 times, contact resistance Max. 50m 0.1g (14 contacts) 0.1g (18 contacts) Infrared reflow soldering. However, the temperature of the of PC board surface adjacent to connector terminals. Soldering iron Sequence Temperature (C) Time (minutes) 1 -55 +0 30 -3 2 25 +10 Max. 5 -5 +3 3 85 -0 30 4 25 +10 Max. 5 -5 Do not press the contact in further than the surface of the molded portion of the connector. Note) After pushing the connector contacting part from the recommended stacking height up to the connector part, return it to the same position and then measure. 2) SIL terminal (terminal pith 1.4mm, 3.5mm) Item Electrical characteristics Mechanical characteristics Rated current Rated voltage Breakdown voltage Insulation resistance Contact resistance Contact force (Note) Ambient temperature Soldering heat resistance Environmental characteristics Terminal pitch 3.5mm Insertion and removal life Conditions 0.5A 60V AC/DC 250V AC for 1 minute Detection current: 1mA Min. 1,000M (initial) Using 500V DC megger (applied for 1min.) Measured based on the HP4338B measurement method of JIS C 5402. Max. 80m +20 0.490+0.196 -0.098 N{50 -10gf}/2 points +15 0.588+0.147 -0.098 N{60 -10gf}/2 points -55C to +85C Max. peak temperature of 245C 300C within 5 seconds/350C within 3 seconds Thermal shock resistance (header and socket mated) Lifetime characteristics Unit weight Specifications Terminal pitch 1.4mm 5 cycles, insulation resistance Min. 100M, contact resistance Max. 80m 50 times, contact resistance Max. 80m 0.05g (8 contacts) 0.03g (2 contacts) No freezing at low temperature Infrared reflow soldering. However, the temperature of the of PC board surface adjacent to connector terminals. Soldering iron Sequence Temperature (C) Time (minutes) 1 -55 +0 30 -3 2 25 +10 Max. 5 -5 3 85 +3 30 -0 4 25 +10 Max. 5 -5 Do not press the contact in further than the surface of the molded portion of the connector. Note) After pushing the connector contacting part from the recommended stacking height up to the connector part, return it to the same position and then measure. 46 AXK(1) 3) DIL terminal Specifications Terminal pitch 1.0mm 0.5A 60V AC/DC Item Rated current Rated voltage Breakdown voltage Insulation resistance Contact resistance Electrical characteristics Mechanical characteristics Conditions 250V AC for 1 minute Detection current: 1mA Min. 1,000M (initial) Using 500V DC megger (applied for 1min.) Measured based on the HP4338B measurement method of JIS C 5402. Max. 60m Contact force 0.29N to 0.78N{30gf to 80gf}/contacts Ambient temperature -55C to +85C No freezing at low temperature Infrared reflow soldering. However, the temperature of the of PC board surface adjacent to connector terminals. Soldering iron Max. peak temperature of 245C Soldering heat resistance Environmental characteristics 300C within 5 seconds/350C within 3 seconds Thermal shock resistance (header and socket mated) Lifetime characteristics Unit weight Sequence Temperature (C) Time (minutes) 1 -55 +0 30 -3 2 25 +10 Max. 5 -5 3 85 +3 30 -0 4 25 +10 Max. 5 -5 5 cycles, insulation resistance Min. 100M, contact resistance Max. 60m Insertion and removal life 50 times, contact resistance Max. 60m 0.33g (20 contacts) Do not press the contact in further than the surface of the molded portion of the connector. 2. Material and surface treatment Part name Molded portion Material Heat resistant resin (UL94V-0) Contact/Post Copper alloy Surface treatment -- Contact portion: Au plating over Ni (Min. 0.1m) Soldering terminal portion: Au plating over Ni (Except for thick of terminal) 3. Contact Side PC Board Specifications Contact portion surface treatment Au plating over Ni (Min. 0.2m) DIMENSIONS mm General tolerance 0.2 1. SIL terminal Terminal pitch 1.0mm, stacking height 0.8mm, 14 contacts twin type Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 0.05 18.40 0.05 16.40 0.15 17.00 0.15 13.00 0.05 0.1 0.05 +0.1 -0 0.90 dia. 0.05 0.80 dia. 0.05 0.05 0.80 (Operating position) 15.00 0.05 17.00 X-Y cross section 0.80 0.1 13.00 0.08 2. Surface contact pattern 0 0.66-0.15 0.55 0.08 0.15 0.12 5.50 1.96 0.1 0.60 1.55+0.2 0 2.05 0.65 7.00 14.70 16.70 17.25 17.65 0.05 0.1 Y 0.20 4.30 (0.60) 2.45 0.1 0.70 3.35 1.10 0.1 0.60+0.08 0 0.12 4.30 0.15 0.60 1.00 1.10 0.05 1.60 0.40 1.50 0.40 X 0.1 1.00 0.05 0.1 0.05 0.1 13.00 13.000.05 0 0.72-0.05 dia. 0.08 C 15.00 7 .0 0 25 0. 0.650.05 2.00 0 0.72-0.05 dia. 2.20 1.000.05 47 AXK(1) 2. SIL terminal Terminal pitch 1.0mm, stacking height 0.8mm, 15 contacts twin type mm General tolerance 0.2 Recommended PC board pattern (TOP VIEW) 0.15 Boss dia. 0.1 0.05 dia. 0.05 18.00 0.05 2.20 0.72 14.00 0.05 (0.650.05 ) 1.00 0 25 0. dia. 0.05 0.80 0.05 16.00 C 0 -0.05 1.10 0.1 3.35 1.10 0.1 5.50 dia. 2. Surface contact pattern 0.08 0.72 +0.1 0 0.90 0.80 16.00 0 -0.05 1.96 0.1 0.60 X-Y cross section (Contact portion) 0.08 0.55 0.08 0.15 0.05 1.00 0.05 0.70 0.80 (Operating position) 1.55+0.2 0 0 0.66-0.15 0.12 14.00 0.20 0.05 19.40 0.05 17.40 0.05 14.00 2.05 (0.60) 0.1 0.35 15.70 17.70 18.25 18.65 0.1 1. Mounting pad layout 0.60+0.08 0 0.12 1.60 0.1 0.65 Y 0.1 0.05 0.05 0.40 2.45 0.1 4.30 0.15 0.60 X 0.1 1.00 4.30 18.00 0.15 14.00 0.05 0.40 2.00 7 .0 3. SIL terminal Terminal pitch 1.0mm, stacking height 0.8mm, 17 contacts twin type Recommended PC board pattern (TOP VIEW) 0.1 0.1 0.05 0.70 +0.2 0 +0.1 0 0.90 dia. 0.05 0.80 0.05 18.00 dia. 0.05 1.55 4.30 17.70 19.50 20.00 X-Y cross section 2. Surface contact pattern 0.80 0.1 16.00 0.08 0.55 0.08 0.15 0.05 16.00 0.05 0 0.66-0.15 1.00 0 0.72-0.05 dia. C 0.08 (0.650.05 ) 2.20 0 0.72-0.05 dia. 18.00 1.10 0.80 (Operating position) (0.60) 0.1 0.35 0.05 16.00 0.05 1.00 5.50 0.600.1 1.96 1.60 0.1 0.65 1. Mounting pad layout +0.08 0 0.1 0.15 1.60 2.03 0.60 0.1 4.30 0.60 0.12 1.10 0.15 16.00 0.05 0.40 0.1 1.00 7 .0 0 25 2.00 0. 4. SIL terminal Terminal pitch 1.0mm, stacking height 0.8mm, 17 contacts single type Recommended PC board pattern (TOP VIEW) 0.1 1. Mounting pad layout 0.15 16.00 1.10 1.55 0.80 0.1 0.05 0.05 18.00 0.80 dia. 2. Surface contact pattern 0.05 16.00 (0.800.05 ) 7 .0 0 25 2.00 2.20 0 0.72-0.05 dia. 0. 48 dia. 1.00 C 0.08 +0.1 0 0.90 0.05 0 0.66-0.15 16.00 0.08 0.40 18.00 +0.2 0 X-Y cross section 0.1 0 0.72-0.05 dia. 0.05 0.70 4.30 0.1 16.00 0.05 0.80 (Operating position) (0.60) 0.50 17.70 19.50 20.00 0.05 1.00 5.50 0.600.1 1.96 1.60 2.03 1.60 0.1 0.50 0.05 +0.08 0 1.10 0.60 0.12 0.60 0.1 4.30 0.40 0.1 1.00 0.1 0.15 0.05 AXK(1) 5. SIL terminal Terminal pitch 1.0mm, stacking height 0.8mm, 18 contacts single type mm General tolerance 0.2 Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout dia. 4.300.05 +0.1 0 0.800.05 dia. 19.000.05 0 1.55+0.2 18.70 20.50 21.00 1.100.1 1.100.1 0.700.05 0.90 (Operating position) 0.80 (0.60) 0.500.1 1.000.05 5.50 0.600.1 0.60 0.12 +0.08 0 1.96 1.60 0.500.1 17.000.05 0.1 1.60 2.03 0.600.15 4.300.1 17.000.15 0.400.05 1.000.1 2. Surface contact pattern 0 0.72 -0.05 dia. 0 0.66-0.15 17.000.1 (Contact portion) 0.400.08 17.000.05 1.000.05 (0.800.05) Note2) 0 0.72 -0.05 dia. C 19.000.08 7 .0 0 25 2.00 0. 6. SIL terminal Terminal pitch 1.0mm, stacking height 1.25mm, 10 contacts twin type Recommended PC board pattern (TOP VIEW) 0.1 0.6 0.1 4.3 0.15 1.05 0.12 2.1 5.5 0.05 0.78 +0.1 a. 0.88 0 di dia. 11.8 3.4 1.25 (Operating position) 0.05 0.05 (Straight portion) 1.2 2.2 11.1 12.5 13.0 0.05 1.0 0.05 0.60.1 (0.6) 0.1 0.65 0.05 9.0 0.7 1.6 2.03 1.6 0.1 0.35 1. Mounting pad layout +0.08 0 0.1 0.15 9.0 0.05 0.4 0.1 1.0 +0.2 1.9 0 2. Surface contact pattern 0.1 9.0 0.08 0.55 0.05 9.0 0 0.5-0.15 0.05 0.08 0 0.7-0.05 dia. C 0. 11.8 2 2.0 0 0.7-0.05 dia. 1.0 (0.650.05 ) 0 .0 7 7. SIL terminal Terminal pitch 1.0mm, stacking height 1.25mm, 10 contacts single type Recommended PC board pattern (TOP VIEW) 0.1 0.6 0.1 4.3 0.15 1.05 0.12 0.78 dia. 0.05 0.05 0.88 1.25 (Operating position) 0.05 dia. 11.8 3.4 +0.1 0 1.9 2.1 5.5 1.2 (Straight portion) 2.2 11.1 12.5 13.0 0.05 1.0 0.05 0.60.1 (0.6) 0.35 0.1 0.65 0.05 9.0 0.7 1.6 2.03 1.6 0.1 1. mounting pad layout +0.08 0 0.1 0.15 9.0 0.05 0.4 0.1 1.0 +0.2 0 2. Surface contact pattern 0.1 9.0 0.06 0.4 0.05 9.0 0.08 11.8 0 0.7-0.05 dia. C 2.0 0 0.5-0.15 0 0.7-0.05 dia. 0.05 1.0 (0.800.05 ) 0. 2 0 .0 7 49 AXK(1) 8. SIL terminal Terminal pitch 1.0mm, stacking height 1.25mm, 12 contacts twin type mm General tolerance 0.2 Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 0.1 0.650.1 0.78 0.05 dia. 13.8 dia. 0.05 2. Surface contact pattern 13.1 14.5 11.00.05 1.00.05 15.0 (0.650.05) 11.00.1 (Contact portion) 2.0 0.08 0 0.5 -0.15 0.55 3.40.05 1.2 (Straight portion) 0.60.1 2.2 4.30.1 +0.1 0 0.88 (0.6) 0.350.1 1.00.05 0.70.05 0.12 0.60.15 1.6 1.6 1.00.1 2.03 0.4 1.05 +0.08 0 0.05 5.5 11.0 2.10.1 11.00.05 1.9 +0.2 0 1.25 (Operating position) 0.15 0 dia. 0.7-0.05 C 7 .0 0 2 0. 0 0.7-0.05 dia. 13.8 0.08 9. SIL terminal Terminal pitch 1.0mm, stacking height 1.45mm, 12 contacts twin type Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 2.10.1 11.00.05 1.00.05 0.1 0.70.05 2.1 +0.2 0 1.45 (Operating position) 1.25 +0.08 0 11.00.15 +0.1 0 0.350.1 11.00.1 (Contact portion) 0 0.5 -0.15 0 dia. 0.7-0.05 C 7 .0 0 2 0. 0 0.7-0.05 dia. 50 5.5 1.2 (Straight portion) dia. 2. Surface contact pattern 11.00.05 (0.650.05) 0.550.08 13.8 13.8 0.05 2.0 13.1 14.5 15.0 0.08 0.78 0.05 dia. 1.00.05 0.1 (0.6) 0.65 1.7 2.1 4.30.1 0.60.1 0.88 3.40.05 0.12 0.60.15 1.6 1.6 0.4 1.00.1 2.03 0.05 AXK(1) 10. SIL terminal Terminal pitch 1.0mm, stacking height 1.45mm, 13 contacts single type mm General tolerance 0.2 Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 2.10.1 12.00.05 1.00.05 0.1 0.70.05 2.1 +0.2 0 1.45 (Operating position) 14.80.05 2. Surface contact pattern 12.00.05 0.350.1 1.00.05 (0.6) 0.65 0.1 (0.800.05) 2.0 14.1 15.5 16.0 dia. 5.5 1.2 (Straight portion) 0.60.1 1.7 2.1 4.30.1 0.78 0.05 dia. +0.1 0 0.88 3.40.05 0.12 0.60.15 1.6 1.6 2.03 1.25 +0.08 0 12.00.15 0.40.05 1.00.1 12.00.1 (Contact portion) 0 0.5 -0.15 0.40.06 0 dia. 0.7-0.05 C 7 .0 0 2 0. 0 0.7-0.05 dia. 14.80.08 11. SIL terminal Terminal pitch 1.1mm, stacking height 1.15mm, 18 contacts twin type Recommended PC board pattern (TOP VIEW) 1. mounting pad layout 0.05 18.7 0.05 2.1 0.1 1.1 0.05 0.05 0.7 +0.08 0 0.1 0.08 18.7 1.5 (Straight portion) 5.5 0.1 dia. 0.05 21.4 2. Surface contact pattern 0.05 18.7 0.05 (0.8 ) 0.05 1.1 1.15 (Operating position) 1.95+0.2 0 (Contact portion) 0.08 0.55 C 0. 2 0 .0 7 0.47 Connection portion 0.8 0.05 +0.1 0.9 0 dia. 2.0 20.7 22.1 22.6 0.6 (0.6) 0.1 0.45 0.1 0.65 2.2 0.1 4.3 1.6 1.6 2.03 0.6 0.15 0.95 0.12 3.4 0.1 0.15 18.70 0.05 0.4 0.1 1.1 0 0.72-0.05 dia. 0.08 0 0.72-0.05 dia. 21.4 51 AXK(1) 12. SIL terminal Terminal pitch 1.1mm, stacking height 1.35mm, 12 contacts twin type mm General tolerance 0.2 Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 0.1 (Terminal coplanarity) 1.15 +0.08 0 0.70.05 2.2 1.7 0.9 +0.1 0 15.5 dia. 14.80.05 2. Surface contact pattern 0.60.1 14.1 dia. 3.40.05 4.3 (0.6) 0.8 0.05 5.5 1.5 (Straight portion) 0.60.15 0.1 0.45 0.650.1 1.10.05 0.12 0.1 2.03 1.6 1.6 1.10.1 0.40.05 12.10.05 2.15 +0.2 0 1.35 (Operating position) 2.10.1 12.10.15 12.10.05 16.0 1.10.05 (0.80.05) 2.0 12.10.1 (Contact portion) 0.550.08 C 0 2 0. 0 0.72-0.05 dia. 0.470.08 7 .0 0 dia. 0.72-0.05 14.80.08 13. SIL terminal Terminal pitch 1.1mm, stacking height 1.35mm, 18 contacts twin type 0.1 (Terminal coplanarity) 2.15 +0.2 0 1.35 (Operating position) 18.70.15 1.15 +0.08 0 0.15 0.12 5.5 1.5 (Straight portion) 1.7 0.6 20.7 0.1 (0.6) 0.450.1 0.650.1 2.2 4.30.1 0.6 1.6 1.6 2.03 1.10.1 0.40.05 Recommended PC board pattern (TOP VIEW) 22.1 22.6 1. Mounting pad layout 18.70.1 (Contact portion) 0.550.08 18.70.05 2.10.1 1.10.05 0.10.05 C 0. 21.4 0.8 0.05 0.9 +0.1 0 dia. 3.40.05 0 0.72-0.05 dia. 0.06 0.470.08 7 .0 0 2 0 0.72-0.05 dia. dia. 21.40.05 2. Surface contact pattern 18.70.05 2.0 1.10.05 (0.80.05) 52 AXK(1) 14. SIL terminal Terminal pitch 1.4mm, stacking height 0.6mm, 8 contacts twin type mm General tolerance 0.2 Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 0 14.0-0.2 0.15 9.8 0.1 1.4 0.05 0.6 X 0.05 9.8 0.05 1.4 0.05 0.8 0.8 0.05 dia. 0.05 2.4 +0.1 0.9 0 3.1 0 4.3-0.1 0 4.9-0.15 5.5 1.8 1.6 1.8 2.03 0.1 0.1 dia. 0.05 (0.6) Y 0.85 12.5 0.08 0.7 11.48 13.5 2. Surface contact pattern X-Y cross section 0.1 (Contact portion) 0.08 0.6 0.08 0.15 0.05 1.4+0.2 0 0.6(Operating position) +0.08 0.4 0 25 0. C 0 0 0.72-0.05 dia. 8 .0 1.75 1.5 3.5 0.08 12.5 0 0.72-0.05 dia. 9.8 0.05 1.4 0.05 (0.95 ) 0.1 1.5 (Straight portion) 9.8 15. SIL terminal Terminal pitch 1.4mm, stacking height 0.6mm, 14 contacts twin type Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 0.05 0.1 0.1 2.4 0.05 1.5 (Straight portion) 1.75 0.1 4.3 0.1 4.9 5.5 1.6 1.8 2.03 0.45 0.1 +0.1 0.9 0 dia. 0.05 0.8 dia. 0.05 (0.6) 0.85 18.2 0.05 1.4 0.05 0.8 +0.08 0 3.1 0.15 18.2 0.1 1.4 0.05 0.6 20.9 0.6 (Operating position) 1.4+0.2 0 20.15 21.9 0 22.4-0.2 2. Surface contact pattern 0.05 0.1 0.08 Connection portion 18.2 (Contact portion) 18.2 0.05 1.4 0.08 0.6 0.08 0.15 3.5 0.55 (0.950.05 ) C 0 0.72-0.05 dia. 25 0. 0 0.72-0.05 dia. 8 .0 0 0.08 20.9 16. SIL terminal Terminal pitch 1.4mm, stacking height 0.6mm, 15 contacts twin type Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 0.05 19.6 0.05 1.4 0.05 0.8 2.4 X 0.1 0 23.8-0.2 0.15 19.6 0.1 1.4 0.05 0.6 0.05 3.1 4.3 4.9 5.5 2. Surface contact pattern 0.1 0.05 19.6 0.05 1.4 0.05 (0.95 ) 8 .0 0 25 0. 1.5 (Straight portion) 1.4+0.2 0 0.6(Operating position) 0.45+0.08 0 C 0.08 0.08 X-Y cross section (Contact portion) 0.08 0.6 0.08 0.15 22.3 0 0 0.72-0.05 dia. 0.72-0.05 dia. 0 -0.1 0 -0.15 0.7 0.1 19.6 dia. 22.3 3.5 0.85 21.55 23.3 0.8 0.05 dia. 0.05 1.75 1.5 Y +0.1 0.9 0 (0.6) 1.8 1.6 1.8 2.03 0.1 53 AXK(1) 17. SIL terminal Terminal pitch 1.4mm, stacking height 0.65mm, 20 contacts twin type mm General tolerance 0.3 Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 0 30.8-0.2 0.15 26.6 0.1 0.05 1.4 0.05 0.6 X 26.6 0.05 1.4 0.05 0.8 0.1 0.8 0.05 dia. 0.05 2.4 +0.1 0.9 0 3.1 0 4.3-0.1 0 4.9-0.15 5.5 1.6 1.8 2.03 0.1 dia. 0.08 (0.6) 0.55 Y 0.85 X-Y cross section 0.05 C 8 .0 1.7 1.5 0 25 0. 0 0.72-0.05 dia. 0.08 29.3 26.6 0.05 1.4 (0.950.05 ) 1.5 (Straight portion) 1.4+0.2 0 0.65 (Operating position) +0.08 0.5 0 0 0.72-0.05 dia. 2. Surface contact pattern 0.1 (Contact portion) 26.6 0.08 0.6 0.08 0.15 18. SIL terminal Terminal pitch 3.5mm, stacking height 0.95mm, 2 contacts twin type 3.5 0.1 0.05 29.3 28.55 30.3 Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 0.05 3.5 0 -0.2 0.1 0.05 0.08 4.7 0.1 1.2 0.65 1.95+0.2 0 3.1 0 0.72-0.05 dia. 0 4.9-0.1 2.06 1.56 1.5 1.2 R0.9 0.95(Operating position) 0.1 0.08 2.4 0.08 0.7 0.08 0.4 .25 C0 1.8 5.6 0.8 . .1 +0 0 0.9 dia 0.05 .05 . 2. Surface contact pattern 3.5 3.25 0.08 5.9 0 dia 5.9 0.6 0.08 0.15 54 0.05 0.6 0.1 0.2 0.5 0.2 (0.6) 0 5.5-0.2 3.4 2.6 R4.8 1.0 7.4 7.0 4.5+0.1 0 0.08 3.5 0.4 1.0 (6.0) AXK(1) 19. DIL terminal Terminal pitch 1.0mm, stacking height 3.4mm, 20 contacts single type mm General tolerance 0.3 Recommended PC board pattern (TOP VIEW) 1. Mounting pad layout 1.0 0.1 0.10 3.85+0.2 -0.1 11.0 9.0 9.000.05 1.000.05 0.600.05 3.350.15 8.60.2 3.30.1 8.60.2 7.0 5.50.2 MIN 9.2 7.2 6.400.05 0.30.1 2.8 dia. (Suction face) (6.4) 0.300.05 0.900.05 Mating PC board 0.50.1 MAX 3.4 2. Surface contact pattern 9.000.05 1.000.05 0.700.05 PC board for the connector mounting Y MIN 7.8 X MAX 4.8 Allowable discrepancy of the dimensions between the connector and the PC board, when the above PC pattern is accepted. X direction: 0.15 Y direction: 0.4 Note) The plating for the contact side of the PC board should be with a Ni underlay and Au overplating (Min. 0.2 m). CUSTOM PRODUCTS Please consult us if you wish for specifications other than those given above. DIL terminal 8 contacts DIL terminal 30 contacts DIL terminal 38 contacts EMBOSSED TAPE DIMENSIONS Please refer to page 59. NOTES 1. As this connector is connected directly to the PC board, the surface of the PC board should be free from dust, dirt, and corrosion. 2. The attachment to the PC board should be designed so as not to cause warping due to connector reaction forces. Also, please refer to the tolerances for the alignment between the connector and the PC board that are indicated in the figure showing the dimensions. Regarding general notes, please refer to pages 8 and 9. 12/1/2002 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog