PHOTOCOUPLER
PS2706-1
AC INPUT RESPONSE
DARLINGTON TRANSISTOR
SOP MULTI PHOTOCOUPLER SERIES
NEPOC Series
The mark shows major revised points.
Document No. PN10244EJ02V0DS (2nd edition)
Date Published March 2006 CP(K)
DESCRIPTION
The PS2706-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
darlington-connected phototransistor.
This is mounted in a plastic SOP (Small Out-line Package) for high density applications.
This package has shield effect to cut off ambient light.
FEATURES
AC input response
High current transfer ratio (CTR = 2 000% TYP.)
High isolation voltage (BV = 3 750 Vr.m.s.)
Small and thin (SOP) package
High-speed switching (tr, tf = 200
s TYP.)
Ordering number of taping product: PS2706-1F3, F4
Safety standards
• UL approved: File No. E72422
• BSI approved: File No. 8219/8220
• CSA approved: File No. CA 101391
• DIN EN60747-5-2 (VDE0884 Part2) approved (Option)
APPLICATIONS
Hybrid IC
Telephone, Exchange equipment
FA/OA equipment
Programmable logic controllers
Data Sheet PN10244EJ02V0DS
2
PS2706-1
PACKAGE DIMENSIONS (in millimeters)
MARKING EXAMPLES
Data Sheet PN10244EJ02V0DS
3
PS2706-1
ORDERING INFORMATION
Part Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application Part
Number*1
PS2706-1
Pb-Free
Magazine case 100 pcs
Standard products
PS2706-1
PS2706-1-F3
Embossed Tape 3 500 pcs/reel
(UL, BSI, CSA
PS2706-1-F4
approved)
PS2706-1-V
Magazine case 100 pcs
DIN EN60747-5-2
PS2706-1-V-F3
Embossed Tape 3 500 pcs/reel
(VDE0884 Part2)
PS2706-1-V-F4
Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10244EJ02V0DS
4
PS2706-1
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Diode
Forward Current (DC)
IF
50
mA
Power Dissipation Derating
PD/C
0.8
mW/C
Power Dissipation
PD
80
mW
Peak Forward Current*1
IFP
1
A
Transistor
Collector to Emitter Voltage
VCEO
40
V
Emitter to Collector Voltage
VECO
6
V
Collector Current
IC
200
mA
Power Dissipation Derating
PC/C
1.5
mW/C
Power Dissipation
PC
150
mW
Isolation Voltage*2
BV
3 750
Vr.m.s.
Operating Ambient Temperature
TA
55 to +100
C
Storage Temperature
Tstg
55 to +150
C
*1 PW = 100
s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output
Pins 1-2 shorted together, 3-4 shorted together.
Data Sheet PN10244EJ02V0DS
5
PS2706-1
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
Diode
Forward Voltage
VF
IF = 5 mA
1.1
1.4
V
Terminal Capacitance
Ct
V = 0 V, f = 1 MHz
60
pF
Transistor
Collector to Emitter Dark
Current
ICEO
IF = 0 mA, VCE = 40 V
400
nA
Coupled
Current Transfer Ratio
(IC/IF)
CTR
IF = 1 mA, VCE = 2 V
200
2 000
%
CTR Ratio*1
CTR1/
CTR2
IF = 1 mA, VCE = 2 V
0.3
1.0
3.0
Collector Saturation
Voltage
VCE (sat)
IF = 1 mA, IC = 2 mA
1.0
V
Isolation Resistance
RI-O
VI-O = 1 kVDC
1011
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz
0.4
pF
Rise Time *2
tr
VCC = 5 V, IC = 2 mA, RL = 100
200
s
Fall Time *2
tf
200
*1 CTR1 = IC1/IF1, CTR2 = IC2/IF2
*2 Test circuit for switching time
Data Sheet PN10244EJ02V0DS
6
PS2706-1
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10244EJ02V0DS
7
PS2706-1
Remark The graphs indicate nominal characteristics.
Data Sheet PN10244EJ02V0DS
8
PS2706-1
Remark The graphs indicate nominal characteristics.
Data Sheet PN10244EJ02V0DS
9
PS2706-1
TAPING SPECIFICATIONS (in millimeters)
Data Sheet PN10244EJ02V0DS
10
PS2706-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
Peak reflow temperature 260C or below (package surface temperature)
Time of peak reflow temperature 10 seconds or less
Time of temperature higher than 220C 60 seconds or less
Time to preheat temperature from 120 to 180C 12030 s
Number of reflows Three
Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(2) Wave soldering
Temperature 260C or below (molten solder temperature)
Time 10 seconds or less
Preheating conditions 120C or below (package surface temperature)
Number of times One (Allowed to be dipped in solder including plastic mold portion.)
Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
Peak temperature (lead part temperature) 350C or below
Time (each pins) 3 seconds or less
Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100C.
Data Sheet PN10244EJ02V0DS
11
PS2706-1
(4) Cautions
Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual
operating conditions and thoroughly take variations or the like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10244EJ02V0DS
12
PS2706-1
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884)
Parameter
Symbol
Speck
Unit
Application classification (DIN VDE 0109)
for rated line voltages 300 Vr.m.s.
for rated line voltages 600 Vr.m.s.
IV
III
Climatic test class (DIN IEC 68 Teil 1/09.80)
55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.2 UIORM, Pd 5 pC
UIORM
Upr
710
850
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices test)
Upr = 1.6 UIORM, Pd 5 pC
Upr
1 140
Vpeak
Highest permissible overvoltage
UTR
6 000
Vpeak
Degree of pollution (DIN VDE 0109)
2
Clearance distance
5
mm
Creepage distance
5
mm
Comparative tracking index (DIN IEC 112/VDE 0303 part 1)
CTI
175
Material group (DIN VDE 0109)
III a
Storage temperature range
Tstg
55 to +150
°C
Operating temperature range
TA
55 to +100
C
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25 C
VIO = 500 V dc at TA MAX. at least 100 C
Ris MIN.
Ris MIN.
1012
1011
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = 175 C (Tsi)
Tsi
Isi
Psi
Ris MIN.
150
200
300
109
C
mA
mW
Data Sheet PN10244EJ02V0DS
13
PS2706-1
PS2706-1
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.