G–37
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
T Series
Subminiature Toggle Switches
Features/Benefits
•Compact size—small footprint
•Single and double pole models
•PC and panel mount
options available
•RoHS compliant models available
Typical Applications
•Hand-held telecommunications
•Instrumentation
•Medical equipment
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (TX01 models): 3 AMPS @
120 V AC or 28 V DC. All other models: 2 AMPS @
120 V AC or 28 V DC. See page G-42 for additional ratings.
ELECTRICAL LIFE: TX01 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
CONTACT RESISTANCE: Below 20 m Ωtyp. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant
and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
diallyl phthalate (DAP), (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass, matte-tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See above for additional contact materials.
CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page G-42 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated. Additional hardware available
separately, see Section O.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G-38 thru G-42. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
T101 SPDT On-None-On
T102 SPDT Off-None-On
T103 SPDT On-Off-On
T105 SPDT Mom.-Off-Mom.
T107 SPDT On-Off-Mom.
T108 SPDT On-None-Mom.
T201 DPDT On-None-On
T205 DPDT Mom.-Off-Mom.
T203 DPDT On-Off-On
T207 DPDT On-Off-Mom.
T208 DPDT On-None-Mom.
T211 DPDT On-On-On.
Actuator
P3 Flatted,
anti-rotation,
.490" high
S.370" high
KLocking lever, round tip
L1 .620" high
M1 .220" high
S1 .410" high
M.210" high
L.290" high
Terminations
ARight angle, PC thru-hole
AVVertical right angle,
PC thru-hole
CPC Thru-hole
V3 Vertical mount V-bracket
ZSolder lug
WWire wrap
Bushing
H.220" high, threaded, flat
H9 .220" high, unthreaded, flat
CF Splashproof, .310" high, threaded, flat
D9 .260" high, unthreaded, keyway
T.310" high, threaded, flat
T9 .310" high, unthreaded, flat
TD .260" high, threaded, keyway
TK .310" high, threaded, keyway
Y.220" high, threaded, keyway
Y9 .220" high, unthreaded, keyway Contact Material
BGold
PGold, matte tin
QSilver
GGold over silver
RGold over silver, matte-tin
Seal
EEpoxy
Models Available
G
Toggle
G–38
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
T Series
Subminiature Toggle Switches
SWITCH FUNCTION
DPDT
MOM. = Momentary
All models with all options when ordered with G, L, R or Q contact material.
SPDT
SPST
2-1
2-1
3-1
N/A
OPEN
N/A
2-3
2-3
OPEN
ONNONEON
ON OFF ON
MOM.OFFMOM.
ON OFF MOM.
OFF NONEON
T101
T103
T105
T107
T102
SP
SCHEMATIC
CONNECTED TERMINALS
POS. 1POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES C&K markingon opposite sideC&K marking on opposite side
T108 2-1 NA 2-3
MOM.NONEON
SPDT
Part number shown: T101SHZQE
DPDT
2-1,5-4
2-1,5-4
N/A
OPEN
2-3,5-6
2-3,5-6
ON NONEON
MOM. OFF MOM.
T201
T205
DP
T203 ON OFF ON
T208
T211*
ON NONEMOM.2-1,5-4N/A2-3,5-6
2-1,5-42-3,5-62-3,5-4
ON ON ON.
SCHEMATIC
CONNECTED TERMINALS
POS. 1POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES C&K markingon opposite sideC&K marking on opposite side
Terminal Nos.
For Reference Only
Part number shown: T201SHZQE
G
Toggle
G
Toggle
G–39
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
T Series
Subminiature Toggle Switches
ACTUATOR
BUSHING
2
Locking Positions
–01 & –02 Models
2 Position lock
–03 & –11 Models
3 Position lock
–08 Models
1 Position lock
2
2
H.220" HIGH THREADED, FLAT Y.220" HIGH THREADED, KEYWAY T.310" HIGH THREADED, FLAT
H9 .220" HIGH UNTHREADED, FLAT Y9 .220" HIGH UNTHREADED, KEYWAY T9 .310" HIGH UNTHREADED, FLAT
L1 .620" HIGHL.290" HIGH
KLOCKING LEVER
P3 ANTI-ROTATION, FLATTED,
.450" HIGH
S.370" HIGH
S.210" HIGH M1 .220" HIGH
(with “T” bushing) S1 .410" HIGH
(with “T” bushing)
Available with T & T9 bushings only.
Dress nut part number 709901201
supplied standard with threaded bushing.
1Actuator shown with standard H bushing.
Subtract .040 (1,02) for TD and D9 bushings,
subtract .090 (2,29) for T, T9, TK, K9 &
CF bushings.
2 Actuators shown with T, T9, TK & CF bushings,
add .050 (1,27) for TD and D9 bushings,
add .090 (2,29) for H, H9, Y & Y9 bushings.
All actuators have chrome finish (except K).
Not available with CF bushing option.
Bushing option code not required. Not available with TX05 & TX07 models.
K actuators have natural aluminum finish.
Keyway on right side. To prevent accidental actuation, toggles
must be lifted before being actuated. When released, toggles
again lock in place. Overtightening mounting nut may cause
actuator to bind.
H standard with C, W & Z terminations.
H9 standard with A, AV & V3 terminations.
Standard with Z, C or W terminations.
Standard with A, AV or V3 terminations.
1
1
G–40
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
T Series
Subminiature Toggle Switches
BUSHING
TERMINATIONS
PANEL MOUNTING10-48 BUSHING
Without Locking Ring
With Standard Locking Ring
1/4 IN. BUSHING
With Standard Locking Ring
Without Locking Ring
With Small Locking Ring
Without Locking Ring
Without Locking Ring
SP DP
PC MOUNTING
T102 – omit center hole.
SP DP
SP DP
TK .310" HIGH THREADED, KEYWAY
ZSOLDER LUG
WWIRE WRAP
CPC THRU-HOLE
TD .260" HIGH THREADED, KEYWAY
D9 .260" HIGH UNTHREADED, KEYWAY
CF SPLASHPROOF, .310" HIGH THREADED, FLAT
IP67 Degree of protection.
Internal o-ring actuator seal and
external bushing seal washer standard.
Not available with K locking lever option.
Not available with P or R contact materials.
G
Toggle
G
Toggle
G–41
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
T Series
Subminiature Toggle Switches
TERMINATIONS
Actuator Shown In Pos. 1
PC MOUNTING
Actuator Shown In Pos. 1
PC MOUNTING
Actuator Shown
In Pos. 1
PC MOUNTING
Actuator Shown In Pos. 1
PC MOUNTING
T102 Models:
Omit terminal 2
Actuator Shown
In Pos. 1
PC MOUNTING
T102 Models:
Omit center hole.
ARIGHT ANGLE, PC THRU-HOLE
ARIGHT ANGLE, PC THRU-HOLE
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
AVVERTICAL RIGHT ANGLE, PC THRU-HOLE
V3 VERTICAL MOUNT, V-BRACKET
Not available with T102 model.
NOTE: Terminal bend radii and lead-in manufacturing option.
T102 Models: Omit terminal 2
NOTE: Terminal bend radii and lead-in manufacturing option.
T101MH9ABE
Horizontal Actuation
SPDT
T201MH9ABE
Horizontal Actuation
DPDT
T101MH9AVBE
Vertical Actuation
SPDT
T201MH9AVBE
Vertical Actuation
DPDT
T101MH9V3BE
SPDT
G–42
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
T Series
Subminiature Toggle Switches
TERMINATIONS
Actuator Shown In Pos. 1
PC MOUNTING
V3 VERTICAL MOUNT, V-BRACKET
CONTACT MATERIAL
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2END CONTACTS: Coin silver, with gold plate over nickel plate.
3CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4END CONTACTS: Coin silver, silver plated.
5CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6TERMINALS: Copper alloy, with matte-tin over nickel plate.
NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All models with all options when ordered with R, G, L or Q contact material.
B contact material standard with A, AV, V3 & W terminations.
Q contact material standard with C & Z terminations.
K, L and M options represent Non RoHS tin lead product and are not recommended for new
designs. For additional information please contact Customer Service.
SEAL
EEPOXY SEAL
T201MH9V3BE
DPDT
OPTION
CODE
CONTACT
MATERIAL
TERMINAL
PLATING RATINGS
SILVER 5
GOLD 1
SILVER 4,5
GOLD OVER
SILVER 2,3
GOLD 3
MATTE-TIN 6
GOLD 1
MATTE-TIN 6
LOW LEVEL/
DRY CIRCUIT
POWER
LOW LEVEL/DRY
CIRCUIT OR POWER
0.4 VA MAX. @ 20 V AC OR DC MAX.
TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC.
TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX.
OR 2 AMPS @ 120 V AC OR 28 V DC.
B
P
Q
G
R
G
Toggle