–1– ASCTB185E 201509-T
ORDERING INFORMATION
TYPES
1) Standard type
Standard packing: Carton 100 pcs., Case 500 pcs.
1a/1c 5A/10A small power
relays JQ RELAYS
Nominal coil voltage
Standard type High capacity type
1 Form A 1 Form C 1 Form A 1 Form C
Part No. Part No. Part No. Part No.
5V DC JQ1a-5V-F JQ1-5V-F JQ1aP-5V-F JQ1P-5V-F
6V DC JQ1a-6V-F JQ1-6V-F JQ1aP-6V-F JQ1P-6V-F
9V DC JQ1a-9V-F JQ1-9V-F JQ1aP-9V-F JQ1P-9V-F
12V DC JQ1a-12V-F JQ1-12V-F JQ1aP-12V-F JQ1P-12V-F
18V DC JQ1a-18V-F JQ1-18V-F JQ1aP-18V-F JQ1P-18V-F
24V DC JQ1a-24V-F JQ1-24V-F JQ1aP-24V-F JQ1P-24V-F
48V DC – JQ1-48V-F – JQ1P-48V-F
VDE
RoHS compliant
FEATURES
• High electrical noise immunity
• High switching capacity in a compact
package
• High sensitivity: 200 mW (1a),
400 mW (1c)
• High surge voltage: 8,000 V between
contacts and coil
• UL, CSA, VDE, SEMKO approved and
TÜV available
• Class B coil insulation type also
available.
TYPICAL APPLICATIONS
• Air conditioners
• Refrigerators
• Microwave ovens
• Heaters
Contact arrangement
1a: 1 Form A
1 : 1 Form C
Contact capacity
Nil:
P:
Standard (5A)
High capacity (10A)
JQ F
Coil insulation class
Nil:
B:
Class E coil insulation
Class B coil insulation (UL)
Contact material
F: AgSnO2 type
Nominal coil voltage (DC)
5V, 6V, 9V, 12V, 18V, 24V, 48V*
Certified by UL, CSA, VDE and SEMKO
Note: *Available only for 1 Form C type
Partly to Be Discontinued:
10A type (Made in Thailand)
Last time buy: 12/2018
JQ
–2– ASCTB185E 201509-T
RATING
1. Coil data
2. Specifications
* Specifications will vary with foreign standards certification ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*4. When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1°C 33.8°F with
20°C 68°F as a reference) and use a coil impressed voltage that is within the maximum applied voltage range.
Contact
arrangement
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out
voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
(at 20°C 68°F)
Max. applied voltage
1 Form A
5V DC Standard type:
75%V or less of
nominal voltage (Initial)
High capacity type:
80%V or less of
nominal voltage (Initial)
5%V or more of
nominal voltage
(Initial)
40.0mA 125 Ω
200mW
180% of nominal voltage
(at 20°C 68°F)
130% of nominal voltage
(at 70°C 158°F)
[When using relays at
85°C 185°F, see Notes*4]
6V DC 33.3mA 180 Ω
9V DC 22.2mA 405 Ω
12V DC 16.7mA 720 Ω
18V DC 11.1mA 1,620 Ω
24V DC 8.3mA 2,880 Ω
1 Form C
5V DC
Standard type:
75%V or less of
nominal voltage (Initial)
High capacity type:
80%V or less of
nominal voltage (Initial)
5%V or more of
nominal voltage
(Initial)
80 mA 62.5Ω
400mW
150% of nominal voltage
(at 20°C 68°F)
110% of nominal voltage
(at 70°C 158°F)
[When using relays at
85°C 185°F, see Notes*4]
6V DC 66.7mA 90 Ω
9V DC 44.4mA 202.5Ω
12V DC 33.3mA 360 Ω
18V DC 22.2mA 810 Ω
24V DC 16.7mA 1,440 Ω
48V DC 8.3mA 5,760 Ω
Characteristics Item Specifications
Standard type High capacity type
Contact
Arrangement 1 Form A 1 Form C 1 Form A 1 Form C
Contact resistance (Initial) Max. 100mΩ (By voltage drop 6 V DC 1 A)
Contact material AgSnO2 type
Rating
Nominal switching capacity (resistive load)
5 A 125 V AC,
2 A 250 V AC,
5 A 30 V DC
N.O. side:
5 A 125 V AC,
2 A 250 V AC,
3 A 30 V AC
N.C. side:
2 A 125 V AC,
1 A 250 V AC,
1 A 30 V DC
10 A 125 V AC,
5 A 250 V AC,
5 A 30 V DC
N.O. side:
10 A 125 V AC,
5 A 250 V AC,
5 A 30 V AC
N.C. side:
3 A 125 V AC,
2 A 250 V AC,
1 A 30 V DC
Max. switching power (resistive load) 625 VA, 150 W
N.O. side:
625 VA, 90 W
N.C. side:
250 VA, 30 W
1,250 V AC, 150 W
N.O. side:
1,250 VA, 150 W
N.C. side:
500 V AC, 30 W
Max. switching voltage 250 V AC, 110 V DC (0.3A)
Max. switching current N.O.: 5 A, N.C.: 2 A N.O.: 10 A, N.C.: 3 A
Nominal operating power 200 mW 400 mW 200 mW 400 mW
Min. switching capacity (reference value)*1100 mA, 5 V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000 MΩ (at 500 V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1 min. 750 Vrms for 1 min. 1,000 Vrms for 1 min. 750 Vrms for 1 min.
Between contact and coil 4,000 Vrms for 1 min. (Detection current: 10 mA)
Temperature rise (coil)
Max. 45°C 113°F
(By resistive method, nominal coil voltage
applied to the coil; contact carrying current:
5A, at 70°C 158°F)
Max. 45°C 113°F
(By resistive method, nominal coil voltage
applied to the coil; contact carrying current:
10A, at 70°C 158°F)
Surge breakdown voltage*2
(Between contact and coil) (Initial) 8,000 V
Operate time (at nominal voltage) (at 20°C 68°F)
(Initial) Max. 20 ms (excluding contact bounce time.)
Release time (at nominal voltage) (at 20°C 68°F)
(Initial) Max. 10 ms (excluding contact bounce time) (Without diode)
Mechanical
characteristics
Shock resistance Functional 294 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
Destructive 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
Vibration resistance Functional 10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10μs.)
Destructive 10 to 55 Hz at double amplitude of 2.0 mm
Expected life Mechanical (at 180 times/min.) Min. 107
Conditions Conditions for operation, transport and storage*3
Ambient temperature: –40°C to +70°C –40°F to +158°F (class E insulation),
–40°C to +85°C –40°F to +185°F*4 (class B insulation)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed 20 times/min. (at nominal switching capacity)
Unit weight Approx. 7 g .25 oz
Partly to Be Discontinued: 10A type (Made in Thailand)
Last time buy: 12/2018
JQ
–3– ASCTB185E 201509-T
3. Expected electrical life
REFERENCE DATA
Standard type
Type Switching capacity No. of operations
Standard type
1 Form A
5 A 125 V AC
3 A 125 V AC
2 A 250 V AC
5 A 30 V DC
5×104
2×105
2×105
105
1 Form C
N.O.
5 A 125 V AC
3 A 125 V AC
2 A 250 V AC
3 A 30 V DC
5×104
2×105
2×105
105
N.C.
2 A 125 V AC
1 A 250 V AC
1 A 30 V DC
2×105
2×105
105
High capacity type
1 Form A
10 A 125 V AC
5 A 250 V AC
5 A 30 V DC
5×104
5×104
105
1 Form C
N.O.
10 A 125 V AC
5 A 250 V AC
5 A 30 V DC
5×104
5×104
105
N.C.
3 A 125 V AC
2 A 250 V AC
1 A 30 V DC
2×105
2×105
105
1.-(1) Max. switching capacity (1 Form A type) 1.-(2) Max. switching capacity (1 Form C type)
AC resistive load (High capacity type)
AC resistive load (Standard type)
1
10 100 250 1,000
10
100
5
Contact voltage, V
Contact current, A
1
10 100 250 1,000
10
100
2
3
5
Contact voltage, V
Contact current, A
AC resistive load
(High capacity type) N.O. side
AC resistive load
(High capacity type)
N.C. side
AC resistive load
(Standard type) N.O. side
AC resistive load
(Standard type)
N.C. side
2. Life curve
Ambient temperature: room temperature
3.-(1) Operate & release time (1 Form A type)
Tested sample: JQ1a-12V-F, 25 pcs.
3.-(2) Operate & release time (1 Form C type)
Tested sample: JQ1-24V-F, 25 pcs.
100
10
1102345
Contact current, A
Life, ×104
125V AC
resistive load
250V AC
resistive load
80 100 120 150
2
0
4
6
8
Coil applied voltage, %V
Operate & release time, ms
Operate time
Release time
Max.
Max.
Min.
Min.
80 100 120 150
2
0
4
6
8
Coil applied voltage, %V
Operate & release time, ms
Operate time
Release time
Min.
Min.
Max.
Max.
Partly to Be Discontinued: 10A type (Made in Thailand)
Last time buy: 12/2018
JQ
–4– ASCTB185E 201509-T
High capacity type
4.-(1) Coil temperature rise (1 Form A type)
Contact carrying current: 3 A, 5 A
Measured portion: Inside the coil
4.-(2) Coil temperature rise (1 Form C type)
Contact carrying current: 3 A, 5 A
Measured portion: Inside the coil
100 110 120 130 140 160 190180170150
10
20
30
40
50
0
Coil applied voltage, %V
Temperature rise, °C
3 A at 85°C
5 A at 85°C
3 A at 70°C
5 A at 70°C
100 110 120 130 140 160150
10
20
30
40
50
60
70
0
Coil applied voltage, %V
Temperature rise, °C
3 A at 70°C
5 A at 70°C
5 A at 85°C
3 A at 85°C
5.-(1) Ambient temperature characteristics
(1 Form A type)
Tested sample: JQ1a-24V-F
Contact carrying current: 3 A, 5 A
5.-(2) Ambient temperature characteristics
(1 Form C type)
Tested sample: JQ1-24V-F
Contact carrying current: 3 A, 5 A 1Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 130°C 266°F) (Carrying current: 3 A)
2Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 130°C 266°F) (Carrying current: 5 A)
3Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 115°C 239°F) (Carrying current: 3 A)
4Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 115°C 239°F) (Carrying current: 5 A)
5Pick-up voltage with a hot-start condition
of 100%V on the coil (Carrying current: 5 A)
6Pick-up voltage with a hot-start condition
of 100%V on the coil (Carrying current: 3 A)
7Pick-up voltage
20 30 40 50 60 70 80 90
0
100
200
300
400
Ambient temperature, °C
Coil applied voltage, %V
1
564
7
3
2
20 30 40 50 60 70 80 90
0
100
200
300
400
Ambient temperature, °C
Coil applied voltage, %V
1
34
5
7
6
2
1. Life curve
Ambient temperature: room temperature
2.-(1) Operate & release time (1 Form A type)
Tested sample: JQ1aP-12V-F, 25 pcs.
2.-(2) Operate & release time (1 Form C type)
Tested sample: JQ1P-12V-F, 25 pcs.
100
10
12046810
Contact current, A
125V AC resistive load
250V AC resistive load
Life, ×104
80 100 120 150
2
0
4
6
8
Coil applied voltage, %V
Operate & release time, ms
Operate time
Release time
Min.
Min.
Max.
Max.
80 100 120 150
2
0
4
6
8
Coil applied voltage, %V
Operate & release time, ms
Operate time
Release time
Min.
Min.
Max.
Max.
3.-(1) Coil temperature rise (1 Form A type)
Contact carrying current: 5 A, 10 A
Measured portion: Inside the coil
3.-(2) Coil temperature rise (1 Form C type)
Contact carrying current: 5 A, 10 A
Measured portion: Inside the coil
100 120 140 160 180
10
20
30
40
50
60
70
0
Coil applied voltage, %V
Temperature rise, °C
10 A at 70°C
10 A at 85°C
5 A at 70°C
5 A at 85°C
Coil applied voltage, %V
Temperature rise, °C
100 110 120 130 140 150 160
10
20
30
40
50
60
70
0
10 A at 70°C
10 A at 85°C
5 A at 70°C
5 A at 85°C
Partly to Be Discontinued: 10A type (Made in Thailand)
Last time buy: 12/2018
JQ
–5– ASCTB185E 201509-T
DIMENSIONS (mm inch)
4.-(1) Ambient temperature characteristics
(1 Form A type)
Tested sample: JQ1aP-24V-F
Contact carrying current: 5 A, 10 A
4.-(2) Ambient temperature characteristics
(1 Form C type)
Tested sample: JQ1P-24V-F
Contact carrying current: 5 A, 10 A 1Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 130°C 266°F) (Carrying current: 5 A)
2Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 130°C 266°F) (Carrying current: 10 A)
3Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 115°C 239°F) (Carrying current: 5 A)
4Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 115°C 239°F) (Carrying current: 10 A)
5Pick-up voltage with a hot-start condition
of 100%V on the coil (Carrying current: 10 A)
6Pick-up voltage with a hot-start condition
of 100%V on the coil (Carrying current: 5 A)
7Pick-up voltage
20 30 40 50 60 70 80 90
0
100
200
300
400
Ambient temperature, °C
Coil applied voltage, %V
1
54
7
6
3
2
20 30 40 50 60 70 80 90
0
100
200
300
400
Ambient temperature, °C
Coil applied voltage, %V
1
5
7
6
2
3
4
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
External dimensions
1 Form A
1 Form C
20
15.6
4.2
0.4
10.16 7.62 7.627.62
10
0.3 0.3
0.5 dia. 0.8
.787
.614
.165
.016
.400 .300 .300.300
.394
.012 .012
.020 dia. .031
4.2
0.4
20
15.6
10.16 5.08
.200
2.54 7.627.62
0.3 0.3
0.3
0.5 dia. 0.8
10
.165
.016
.787
.614
.400 .100 .300.300
.012 .012
.012
.020 dia. .031
.394
Schematic (Bottom view)
1 Form A 1 Form C
Coil
COM N.O.
Coil
COM N.O.
N.C.
PC board pattern (Bottom view)
1 Form A 1FormC
Tolerance: ±0.1 ±.004
4-1.3 dia.
7.62
7.62
10.16 4-.051 dia.
.300
.300
.400
5-1.3 dia.
7.62
7.62
10.16
2.54
5-.051 dia.
.300
.300
.400
.100
CAD Data
Dimension:
Less than 1mm .039inch:
Min. 1mm .039inch less than 5mm .197 inch:
Min. 5mm .197 inch:
General tolerance
±0.2 ±.008
±0.3 ±.012
±0.4 ±.016
Partly to Be Discontinued: 10A type (Made in Thailand)
Last time buy: 12/2018
JQ
–6– ASCTB185E 201509-T
SAFETY STANDARDS
NOTES
For Cautions for Use.
Item UL/C-UL (Recognized) CSA (Certified) VDE (Certified) TÜV (Certified) SEMKO (Certified)
File No. Contact rating File No. Contact rating File No. Contact rating File No. Rating File No. Contact rating
Standard type
(5A) 1 Form A
E43028 5A 125V AC
5A 277V AC
5A 30V DC
0.3A 110V DC
1/10HP 125V AC
1/6HP 277V AC
LR26550 5A 125V AC
5A 277V AC
5A 30V DC
0.3A 110V DC
1/10HP 125V AC
1/6HP 277V AC
40011435 5A 250V AC (cos
φ
=0.4) B 11 04
13461 296
5A 250V AC (cos
φ
=0.4)
5A 30V DC (0ms)
817138 3(2)A 125V AC
2(1)A 250V AC
5A 30V DC
Standard type
(5A) 1 Form C
E43028 5A 125V AC
5A 277V AC
5A 30V DC
0.3A 110V DC
1/10HP 125V AC
1/6HP 277V AC
LR26550 5A 125V AC
5A 277V AC
5A 30V DC
0.3A 110V DC
1/10HP 125V AC
1/6HP 277V AC
40011435 5A 250V AC (cos
φ
=0.4)
(N.O.)
3A 250V AC (cos
φ
=0.4)
(N.C.)
B 11 04
13461 296
5A 250V AC (cos
φ
=0.4)
5A 30V DC (0ms)
817138 3(2)A 125V AC
2(1)A 250V AC
5A 30V DC
High capacity type
(10A) 1 Form A
E43028 10A 125V AC
8A 277V AC
5A 30V DC
0.3A 110V DC
1/6HP 125V AC
1/6HP 277V AC
LR26550 10A 125V AC
8A 277V AC
5A 30V DC
0.3A 110V DC
1/6HP 125V AC
1/6HP 277V AC
40011435 10A 250V AC (cos
φ
=0.4) B 11 04
13461 296
10A 250V AC (cos
φ
=0.4)
5A 30V DC (0ms)
817138 5(3)A 250V AC
5A 30V DC
High capacity type
(10A) 1 Form C
E43028 10A 125V AC
8A 277V AC
5A 30V DC
0.3A 110V DC
1/6HP 125V AC
1/6HP 277V AC
LR26550 10A 125V AC
8A 277V AC
5A 30V DC
0.3A 110V DC
1/6HP 125V AC
1/6HP 277V AC
40011435 (N.O.)
10A 250V AC (cos
φ
=0.4)
(N.C.)
3A 250V AC (cos
φ
=0.4)
B 11 04
13461 296
10A 250V AC (cos
φ
=0.4)
5A 30V DC (0ms)
817138 5(3)A 250V AC
5A 30V DC
Note about relay installation orientation
Top
Bottom
When installing with the relay terminals parallel to the ground, the contact terminals at
the bottom and the coil terminals at the top, component friction will occur after
numerous switching actions or due to vibration in the non-excitation state.
Since this may cause the relay to stop functioning when the pick-up voltage increases
even if the nominal voltage is applied, please do not install using this orientation.
Partly to Be Discontinued: 10A type (Made in Thailand)
Last time buy: 12/2018
