BAS40-00 to BAS40-06 Vishay Semiconductors Small Signal Schottky Diodes, Single & Dual Features * These diodes feature very low turn-on voltage and fast switching e3 * These devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC BAS40-00 BAS40-04 3 3 Top View 1 2 1 2 BAS40-05 BAS40-06 3 3 Top View 1 1 2 2 18435 Mechanical Data Case: SOT-23, Plastic case Weight: approx. 8.8 mg Packaging Codes/Options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 3 k per 7" reel (8 mm tape), 15 k/box Parts Table Part Ordering code Type Marking Remarks BAS40-00 BAS40-00-GS18 or BAS40-00-GS08 43 Tape and Reel BAS40-04 BAS40-04-GS18 or BAS40-04-GS08 44 Tape and Reel BAS40-05 BAS40-05-GS18 or BAS40-05-GS08 45 Tape and Reel BAS40-06 BAS40-06-GS18 or BAS40-06-GS08 46 Tape and Reel Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Repetitive peak reverse voltage Symbol Value Unit VRRM = VRWM = VR 40 V Forward continuous current Tamb = 25 C Surge forward current tp < 1 s, Tamb = 25 C IFSM Tamb = 25 C Ptot Power dissipation 1) 1) IF 200 1) mA 600 1) mA 200 1) mW Device on fiberglass substrate, see layout on next page. Document Number 85701 Rev. 1.6, 12-Dec-05 www.vishay.com 1 BAS40-00 to BAS40-06 Vishay Semiconductors Thermal Characteristics Tamb = 25 C, unless otherwise specified Parameter Test condition Thermal resistance junction to ambient air Junction temperature Storage temperature range 1) Device Symbol Value Unit RthJA 4301) K/W Tj 125 C Tstg - 65 to + 125 C on fiberglass substrate, see layout on next page. Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Test condition Symbol Min V(BR) 40 Typ. Max Unit 20 100 nA VF 380 mV Pulse test tp < 300 s, IF = 40 mA VF 1000 mV Diode capacitance VR = 0 V, f = 1 MHz Ctot 5 pF Reverse recovery time IF = 10 mA, IR = 10 mA, Irr = 1 mA, RL = 100 5 ns Reverse breakdown voltage IR = 10 A (pulsed) Leakage current Pulse test VR = 30 V, tp < 300 s IR Forward voltage Pulse test tp < 300 s, IF = 1.0 mA V 4.0 trr Layout for RthJA test Thickness: Fiberglass 1.5 mm (0.059 in.) Copper leads 0.3 mm (0.012 in.) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) www.vishay.com 2 17451 Document Number 85701 Rev. 1.6, 12-Dec-05 BAS40-00 to BAS40-06 Vishay Semiconductors 0.175 (.007) 0.098 (.005) 0.1 (.004) max. 0.4 (.016) 0.95 (.037) 1.15 (.045) Package Dimensions in mm (Inches) 2.6 (.102) 2.35 (.092) 0.4 (.016) ISO Method E 3.1 (.122) Mounting Pad Layout 2.8 (.110) 0.52 (0.020) 0.4 (.016) 0.95 (.037) 0.95 (.037) 1.20(.047) 1.43 (.056) 0.9 (0.035) 2.0 (0.079) 0.95 (0.037) 0.95 (0.037) 17418 Document Number 85701 Rev. 1.6, 12-Dec-05 www.vishay.com 3 BAS40-00 to BAS40-06 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 4 Document Number 85701 Rev. 1.6, 12-Dec-05 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1