1,4 1,5 0,6 tray packaging packaging unit 36 pcs 5 x 18 = 90 Pin 1 18 6,3 0,7 14,8 5,8 max. 138 +0,3 Verpackt in Tray Verpackungseinheit 36 St. 46,2 2,8 5 x 46,2 = 231 Leiterplatte pcb max. 325 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 120 Stuck - Packaging unit: 120 pcs +0,2 39,3 -0,4 Ansaughaube hood 25,1 +0,2 Abspulrichtung - Reel off Direction 16 28 56 +0,2 8,25 ohne / without 56,5 150 33,3 0,1 330 Mutter / nut Layoutvorschlag: Bolzen / bolt recommended layout: 3,7 Gewinde / thread M3 / #4-40 7 x 2,74 = 19,18 A 2,74 (15x) 1 1,7 x 45 (4x) 0,1 Pin 1 1,37 3,4 3,4 2,74 B 3,1 0,05 1,8 1,8 0,05 6,4 0,1 Bohrung / hole 13 Gewinde / thread M3 / #4-40 2,84 12,6 0,3 13,8 17,1 Pin 1 B 6 x 2,74 = 16,44 33,3 0,05 3,1 40,1 0,2 12,2 0,1 A 0,1 A M 1:1 Anschlussbereich verzinnt 194255 194256 174386 X 164014 #4-40 terminal area tin plating 194257 164010 Koplanaritat der Anschlusse 0,1 mm 194258 164005 #4-40 194259 164002 M3 Ident-Nr. part-no. tape &reel Ident.-Nr. coplanarity area of termination 0,1 mm Anforderungsstufe: 2 class: 2 part-no. tray M3 ohne without Mutter thread Bolzen Bemerkung bolt remark Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Fehlende Masse und Angaben siehe DIN 41652 / Missing information and dimensions according to DIN 41652 Sonstige Angaben siehe Fertigungsunterlagen / Additional indications please see the production documentation Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. TMC-P 15-SMD-6,3-BA8 TMC-P 15-SMD-6,3-type 8 144890 www.ERNI.com D 27.10.2009 Index Date Class TMCP I A3