Table of Contents Description Page Amphenol(R) EMI/EMP Filter Protection Connectors for Protection of Sensitive Circuits ........................................................ 1 EMI Capabilities ................................................................................ 2, 3 Filter Connector Options ....................................................................... 4 Filter Selection Data .............................................................................. 5 Effect of Temperature on EMI Filter Attenuation ................................... 6 Impedance Matching Formula............................................................... 7 Quality Assurance Testing .................................................................... 8 FCTV Series (Composite Tri-Start, MIL-DTL-38999 Series III intermateable) Design Features, Alternate Positions............................................... 9 Wall Mounting Receptacle ............................................................. 10 Jam Nut Receptacle....................................................................... 11 Box Mount Receptacle, printed circuit board mount ...................... 12 Jam Nut Receptacle, printed circuit board mount .......................... 13 FTV Series (Tri-Start, MIL-DTL-38999 Series III intermateable) Design Features, Alternate Positions............................................. 14 Wall Mounting Receptacle ............................................................. 15 Wall Mounting Receptacle (UTS crimp)......................................... 16 Jam Nut Receptacle....................................................................... 17 Jam Nut Receptacle (UTS crimp) .................................................. 18 Box Mount Receptacle, printed circuit board mount ...................... 19 Jam Nut Receptacle, printed circuit board mount .......................... 20 FJT Series (MIL-DTL-38999 Series II intermateable) Design Features, Alternate Positions............................................. 21 Wall Mounting Receptacle ............................................................. 22 Wall Mounting Receptacle, back panel mounting .......................... 23 Box Mounting Receptacle .............................................................. 24 Box Mounting Receptacle, back panel mounting........................... 25 Jam Nut Receptacle....................................................................... 26 Jam Nut Receptacle, minimum penetration ................................... 27 FLJT Series (MIL-DTL-38999 Series I intermateable) Design Features, Alternate Positions............................................. 28 Wall Mounting Receptacle ............................................................. 29 Wall Mounting Receptacle, back panel mounting (UTS crimp)...... 30 Box Mounting Receptacle .............................................................. 31 Box Mounting Receptacle, back panel mounting (UTS crimp) ...... 32 Box Mounting Receptacle, printed circuit board mount ................. 33 Jam Nut Receptacle....................................................................... 34 Jam Nut Receptacle (UTS crimp) .................................................. 35 Jam Nut Receptacle, printed circuit board mount .......................... 36 Jam Nut Receptacle, minimum penetration ................................... 37 Description Page FSJT Series (Proprietary SJT intermateable) Design Features, Alternate Positions ............................................ 38 Wall Mounting Receptacle ............................................................. 39 Wall Mounting Receptacle (UTS crimp)......................................... 40 Box Mounting Receptacle.............................................................. 41 Box Mounting Receptacle (UTS crimp) ......................................... 42 Jam Nut Receptacle ...................................................................... 43 FBL Series IV (MIL-DTL-38999 Series IV intermateable) Design Features, Alternate Positions ............................................ 44 Box Mounting Receptacle, Wall Mounting Receptacle .................. 45 Box Mounting Receptacle (UTS crimp) Wall Mounting Receptacle (UTS crimp)......................................... 46 FPT Series (MIL-C-26482 Series 1 intermateable) Design Features, Alternate Positions ............................................ 47 Wall Mounting Receptacle ............................................................. 48 Box Mounting Receptacle.............................................................. 49 Jam Nut Receptacle ...................................................................... 50 Jam Nut Receptacle, minimum penetration................................... 51 FPTE Wall Mounting Receptacle................................................... 52 FPTE Jam Nut Receptacle ............................................................ 53 FAN Series (Filtered "AN") (MIL-DTL-5015 intermateable) Design Features, Alternate Positions ............................................ 54 Box Mounting Receptacle.............................................................. 55 EMI/RFI Programmable Connectors Design Features ............................................................................ 56 PFLJT Shell Styles ........................................................................ 57 PFTV Shell Styles.......................................................................... 58 PFSJT Shell Styles ........................................................................ 59 Programmable Connectors How to Order ..................................... 60 Filter Adapters............................................................................... 61, 62 Transient Protection, MOV - Metal Oxide Varistor Connectors .... 63, 64 Transient Protection, Diode Connectors ....................................... 65, 66 Transient Protection, ESA - Energy Shunting Assembly.................... 67 Filter Accessories.................................................................................... Universal Header Assembly for Flex Print or PC Board Connectors .............................................................................. 68, 69 Electrostatic Discharge (ESD) Protected Connectors ................... 70 How to Order Filter Connectors .................................................... 71, 72 EMI Filter Check List (for assistance in ordering) ............................... 73 Rectangular Filter Connectors from Amphenol Canada ............... 74, 75 EMI Filter/Transient Protection Specials ............................................. 76 Amphenol Sales Office and Distributor Listing For more assistance, contact your local Amphenol field sales office or: Amphenol Aerospace 40-60 Delaware Avenue, Sidney, NY 13838-1395 Phone: 607-563-5011 or 800-678-0141 Fax: 607-563-5157 NOTE: The connector products in this brochure were formerly known as Bendix(R) products. These products are now manufactured and sold under the Amphenol(R) brand name. The name "Amphenol" will replace the name "Bendix" on products and literature in the future. Due to space limitations, metric equivalents of dimensional data in this catalog have not been included. All dimensions given may be converted to the metric system by the standard formula: dimension (inches) x 25.40 = dimension (millimeters). Amphenol has the following and other patents which relate to the products described in this catalog: U.S. Patent 3,764,943, U.S. Patent 3,840,841, U.S. Patent 4,029,386, U.S. Patent 4,264,116, U.S. Patent 4,275,945, U.S. Patent 4,431,251, U.S. Patent 4,440,463, U.S. Patent 4,583,810, U.S. Patent 4,707,048, U.S. Patent 4,707,049, U.S. Patent 4,741,710, U.S. Patent 4,746,310, U.S. Patent 4,747,789, U.S. Patent 4,768,977, U.S. Patent 4,789,360, U.S. Patent 4,932,900, U.S. Patent 5,163,853, U.S. Patent 5,164,873, U.S. Patent 5,167.537, U.S. Patent 5,195,014, U. S. Patent 5,198,958, U.S. Patent 5,211,582 Amphenol has additional patents pending, as well as patents and applications in other countries. Amphenol Aerospace operates quality systems that are certified to ISO9001: 2000 by third party registrars (R) Amphenol EMI/EMP Filter Protection Connectors for protection of sensitive circuits Amphenol(R) EMI/EMP Protection Connectors offer the versatility of standard connectors with EMI/EMP protection for sensitive circuits. Internal housing of the EMI/EMP devices eliminates costly and bulky exterior discrete protection devices. Virtually all major MIL-Spec cylindricals can be incorporated with filter devices: * MIL-DTL-38999 * MIL-DTL-5015 * MIL-C-26482 * MIL-C-27599 * MIL-C-83723 * MIL-C-26500 Amphenol offers filter connectors that include: * EMP protection using diodes * EMP protection utilizing metal oxide varistors (MOV's) * Filtered plug connectors * Filtered hermetic connectors * Programmable filtered connectors with rear removable and rear insertable crimp contacts * Filter connectors with ESD protection * Combinations of filtering devices within one connector pack- that are rear insertable and rear removable. Contacts can be replaced easily with standard * Pre-testing from factory and ready for installation FTV Subminiature Tri-Start, MIL-DTL-38999 Series III, Metal or Composite shells with Filter Protection. age This catalog focuses on the cylindrical connector offerings from Amphenol with EMI/EMP filter transient protection. There are also many rectangular filter connectors that are offered by Amphenol which include: * MIL-DTL-24308 D-Sub * MIL-DTL-83513 Micro D * ARINC 404/600 * DOD-83527 Rack and Panel * MIL-DTL-83733 Rack and Panel Rectangular filter interconnects are manufactured and supplied by Amphenol Canada. See further information at the end of the catalog. Advantages of Filter Connectors: * Reduction in overall weight and space with the elimination of external filter circuits * Reduction of solder junctions * Increase in reliability due to fewer connections * Fragile filter elements protected from handling and environmental damage circuit boards. MOV Connectors MOV's act as a variable resistor to efficiently dis- M81969 insertion/removal sipate energy. MOV can be packaged singularly or in combinations with other EMI Fil- tool. FLJT Subminiature LJT, MIL-DTL-38999 FJT Subminiature JT, MIL-DTL-38999 Series II with Filter Protection. Programmable Filter Connectors With crimp contacts Series I with Filter Protection. tering. FCTV with Stand-off Flange Filter AN Connectors Filtered Tri-Start connectors with composite shells for attachment to printed MIL-DTL-5015 Type Connectors with Filter Protection. FPT Miniature MIL-C26482 Series 1 with Filter Protection. Header 1 EMI Capabilities for maximum design flexibility Filter contacts for both designs contain either a pi passive element network comprised of a ferrite inductor and ceramic capacitor, or a single capacitor. For planar designs other filter networks are available, ie. T Type, L-C Type and C-L Type. An encapsulant of oven-cured epoxy in the rear provides: * Mechanical and thermal insulation of the ceramic elements - mechanical loading can be accomplished without capacitor damage. Pins can be bent 90 and straightened with no damage to the filter. * Hermeticity (4.6 x 10-3 cc/sec) - prevents water from entering through the rear of the connector in high humidity environments. Amphenol recommends using metal protection The Amphenol(R) EMI filter connector utilizes two manufacturing technologies to provide the user with the most cost effective performance across the frequency range. (For EMP performance data, see pages 63-66). The tubular design offers over 40 years of proven field reliability. All filter contacts within the connector share a common ground plane, which is connected to the connector shell. The pin to pin isolation is 85 dB minimum at 100 MHz. The planar design joins pins to a multi-layered ceramic forming an array sub-assembly, with a peripheral ground which is connected to the connector shell via a ground spring. Pin to pin capacitance is less than 50 pf with a pin to pin isolation of 85 dB minimum at 100 MHz. Pi Type Planar Array Assembly Pi Type Tubular Contact Assembly Ground Electrode Internal Margin External Margin Ferrite Inductor Ground Electrode Solder Joint Solder Joint Ceramic Capacitor Solder Washer or Spring Clip Ferrite Inductor Hot Electrodes Hot Electrode External Margin Grounding Ring caps during cleaning operations. 2 * More in-depth information on attenuation is available in: L-1146, General Design Guideline for EMI Filters and/or TVS (Transient Voltage Suppression) Connectors. Also for further information ask for: EMI Capabilities, cont. Planars, MOV's, Tubular and Diode Contacts Amphenol provides a wide range of filtering solutions. You can select your options for your particular interference threats - VHF, UHF, HF or other filter ranges, then couple with a connector package of your choice. Or give Amphenol your custom shell design requirements for assistance in designing your unique filter solution. Planar Array Assembly EMI Filter connectors are intended for use in temperatures from -55C to +125C. Attenuation will change with feedthrough current and temperature.* To assure reliability, connectors may be subjected to an attenuation performance test verifying proper assembly and grounding of the filters. Attenuation data on filter performance is stated in reference to a 50 ohm impedance system in order to allow filter performance to be more easily translated into real world impedances. Those interested in determining the expected filter performance in an impedance system other than 50 ohms may refer to page 7 of this catalog or may contact Amphenol Aerospace for further assistance. It is suggested that the user analyze his system requirements for EMI protection in the following areas: * Working voltage (DC or AC and Frequency) * Peak voltage * Desired attenuation at a given frequency level * Any special capacitance limitations Definition of Filter Contacts: MF HF VHF UHF Medium Frequency 50 dB performance between 300 - 2999 KHz High Frequency 50 dB performance between 3 - 29 MHz Very High Frequency 50 dB performance between 30 - 2999 MHz Ultra High Frequency 50 dB performance between 300 - 2999 MHz Filter contacts can be provided in most frequencies in contact sizes 22 or larger. Consult Amphenol Aerospace for availability. Tubular connector designs will meet 3 amps RF current from -55C through +125C. Planar connector designs will meet 5 amps. Capacitor and MOV Planars Tubular Filters and Diode Contacts Contact Options * Coaxial, concentric twinax, triax and quadrax contacts can be included in arrangements of filtered contacts for signal or power circuits (See Amphenol catalog 12-130, High Frequency Contacts for Multi-pin Connectors). * Filter contacts with differing cutoff frequencies can be mixed in any given insert arrangement. (ratio 20:1 typical) * Programmable filter connectors have crimp rear removable and rear insertable contacts. These provide benefits not available in fixed EMI/RFI connectors. Modifications of the EMI performance can be made simply with changing the contacts. (See pages 56-60) * Ground, insulated or filter contacts can be combined within the same connector to meet unique or changing frequency protection requirements. * Thermocouple contacts * Diodes for EMP Methods of Wire Termination * Solder cup - wire termination * PCB termination (Pre-tinning is available) * Solderless wrap * Amphenol(R) UTS (Universal Termination System) allows crimp termination. It uses crimp insertable socket contacts on conductor wires. Sockets mate with filter pins within the connector body. (Socket type M39029/57). (For further contact information, see catalog 12-090, MIL-DTL-38999 Series I & II). * Weld terminal for thermocouple contacts 3 Filter Connector Options Other Filter Connector Options include: * Plug shells with grounding fingers for shielding against external EMI. (See page 76). * Filter adapters eliminate replacement of either existing mated pair. The adapter provides the circuit protection at the MF, VHF and UHF levels, and is an effective and economical method of introducing EMI/EMP protection to an installed system. Adapters are to be placed between mating faces. (See pages 61, 62). * Receptacle shell modifications that allow mounting directly to a PC board or flex header. Stand-off shells are available in different configurations. These offer improved reliability by eliminating external spacers and washers. (See pages 10). * The hermetic filter connector, while only approximately 1/2 inch longer than standard series connectors, provides all the benefits of a hermetic connector, plus EMI protection for sensitive circuits. The filter assembly is protected by a fused glass insert within a unique steel housing. This design provides the capability to tolerate high level static pressure while maintaining a low level leakage rate. Consult Amphenol Aerospace for more information. * Composite shell filter connectors meet the MIL-DTL-38999, Series III dimensional length, and offer a light-weight, corrosion resistant, durable connector with the same high performance features as its metal counterpart. The composite filter connector utilizes planar technology to accommodate VHF-1 or better electrical performance characteristics. (See pages 9-13). * Filter connectors with ESD (Electrostatic Discharge) protection are available. These MIL-DTL-38999 Series III connectors have an added feature of a Faraday Cage to shunt electrostatic discharge events to the conductive enclosure on which the connector is mounted. (See page 70). * Filtered Plugs are designed for applications where EMI protection is essential, but access to the receptacle is denied. Designed with the same components as a standard filter receptacle, the filtered plug offers the option of being mounted on the cable harness. It is a cost effective method of achieving EMI protection when length restrictions prohibit inclusion of an adapter to the system. Consult Hermetic filter connector Amphenol Aerospace for availability. * Diode Connectors offers versatility with transient protection for sensitive circuits, such as TTL lines. Diodes can stand alone or be combined with other filters. (Pages 65, 66). * Receptacles with EMP protection are available for MIL-DTL38999 Series IV. (Pages 44-46). * Amphenol's Energy Shunting Assembly is a simple, compact unit which provides lightning and electromagnetic pulse protection of systems in which many signal lines enter sensitive electronic equipment. (Page 67). 4 Cylindrical Filter Protection Connectors are offered in a wide range of styles, with custom designs for special applications. Filter Adapters can be attached to connectors to provide EMI/EMP protection. Filtered plug Composite shell stand-off Filter 38999 connector ESA - Energy Shunting Assembly Diode Connectors Filter Selection Data Amphenol(R) EMI Connectors are produced with several types of filters. They are all low band pass filters with the following configurations: L-C *Typical of HF, VHF and UHF filter. Low source / high load impedance. Pi Typical of the VHF, UHF and MF filter Cascaded Pi Typical of the HF filter. It consists of two VHF Pi filters on a common pin and is available in tubular designs only. C-L *Typical of HF, VHF and UHF filter. High load impedance / low source. Capacitor *Consists of a feed-through capacitor without any ferrite. It can be 50pf to 1f and carry the MF, HF and VHF designation depending on its typical 50dB performance. T *Typical of HF, VHF and UHF filter. Low source / low load impedance. * Consult factory for attenuation performance values. Medium Frequency Filter High Frequency Filter Very High Frequency Filter Ultra High Frequency Filter MF1 (Pi) HF1 (Cascaded Pi) VHF1 (Pi) VHF2 (Pi) UHF1 (Pi) UHF2 (Pi) Parameters 150kHz 20dB - - - - - 15MHz - 50dB - - - - 50MHz - 80dB - - - - 100MHz 80dB - 62dB 46dB 18dB 28dB 50VDC 200VDC 200VDC 200VDC 200VDC 200VDC 100 volts DC 500 volts DC 500 volts DC 500 volts DC 500 volts DC 500 volts DC Size 16 contacts 13.0 amps 13.0 amps 13.0 amps 13.0 amps 13.0 amps 13.0 amps Size 20 contacts 7.5 amps 7.5 amps 7.5 amps 7.5 amps 7.5 amps 7.5 amps Size 22 contacts not available not available 5.0 amps 5.0 amps 5.0 amps 5.0 amps 3.0 amps 3.0 amps 3.0 amps 3.0 amps 3.0 amps 3.0 amps Minimum Insulation Resistance** 250 megohms 10 gigaohms 10 gigaohms 10 gigaohms 10 gigaohms 10 gigaohms Typical Capacitance*** 1.0 microfarad 16 nanofarads 7 nanofarads 2.5 nanofarads 375 picofarads 710 picofarads Minimum Attenuation (Test Points)* Maximum Working Voltage (User must specify DC or AC) DC Dielectric Withstanding Voltage Capability (for 5 sec. with 10 milliamperes max. charging current) Maximum Feed-thru Current (DC and/or Audio Frequency R.M.S.) Maximum RF Current Air Leakage 4.6 x 10-3 cc/sec Operating Temperature Range -55C to +125C * ** *** When tested at 25C per MIL-STD-220. After 2 minutes at working DC voltage through a protective resistance of 1 megohm when measured between contact and ground at +25C. When measured at a frequency of 1 .1kHz and a voltage not exceeding 1.0 V.A.C.R.M.S. at +25C. Consult Amphenol, Sidney, NY or your Amphenol representative for part number. Lower leakage rates are available upon request. Summation of the DC and low level AC super-imposed peak voltage. Consult Amphenol, Sidney, NY whenever AC voltage is present. Consult Amphenol, Sidney, NY or your Amphenol representative for availability. Higher DWV ratings are available upon request. Consult Amphenol, Sidney, NY. 5 Effect of Temperature on EMI Filter Attenuation TYPICAL INSERTION LOSS (dB) PER MIL-STD-220, 5 ADC, 25C 100MHz 300MHz 375 pf UHF1 Capacitance 1MHz 3MHz 10MHz 30MHz 0 0 1 8 16 - - 750 pf UHF2 0 0 3 10 19 - - 2500 pf VHF2 0 2 8 20 28 - - 7000 pf VHF1 5 9 17 23 40 - - 16000 pf HF1 6 14 20 24 80 - - Most filter attenuation curves and capacitance values are expressed at 25C. However, temperature can affect the capacitance of a titanate filter element, affecting the insertion loss that the element will cause. In order to assist the user in anticipating the effect of various temperatures, the following charts applicable to Amphenol(R) filter connectors utilizing MF1, HF1, VHF1, VHF2, UHF1 and UHF2 filters are provided. Please note that all insertion loss (attenuation) values given were measured with no load applied. The band designations refer to MIL-STD-2120. 1000MHz MF1* VHF2 Typical Capacitance = 1,000,000 pf Min. 800,000 pf Max. 1,600,000 pf Type Pi Typical Capacitance = 2,500 pf Min. 1,900 pf Max. 4,000 pf Band E, Type Pi FCO Temp. 1MHz 3MHz 10MHz 30MHz 100MHz 300MHz 1000MHz Temp. FCO 1MHz 3MHz 10MHz 30MHz 100MHz 300MHz 1000MHz -55C - 18 - 64 80 80 80 80 -55C - 0 2 7 17 40 58 71 Room 7.94K 55 - 80 80 80 80 80 Room 3.3M 0 2 8 24 46 61 71 - 22 - 70 80 80 80 80 +125C - 0 3 10 26 46 63 69 +125C HF1* Typical Capacitance = 16,000 pf Min. 9,800 pf Max. 24,000 pf Type Cascaded Pi FCO Temp. UHF2 Typical Capacitance = 750 pf Min. 500 pf Max. 1,100 pf Band C, Type Pi 1MHz 3MHz 15MHz 50MHz 100MHz 300MHz 1000MHz Temp. FCO 1MHz 3MHz 10MHz 30MHz 100MHz 300MHz 1000MHz -55C - 2 6 24 62 80 80 80 -55C - 0 0 3 9 25 46 61 Room 648K 3 9 50 80 80 80 80 Room 12.7M 0 0 3 10 28 46 61 - 0 6 30 62 80 80 80 +125C - 0 0 3 10 24 42 60 +125C VHF1 UHF1 Typical Capacitance = 7,000 pf Min. 4,900 pf Max. 12,000 pf Band G, Type Pi Typical Capacitance = 375 pf Min. 290 pf Max. 450 pf Band B, Type Pi Temp. FCO 1MHz 3MHz 10MHz 30MHz 100MHz 300MHz 1000MHz Temp. FCO 1MHz 3MHz 10MHz 30MHz 100MHz 300MHz 1000MHz -55C - 1 2 8 21 44 61 65 -55C - 0 0 1 6 21 43 58 Room 1.27M 1 6 18 42 62 72 75 Room 21.9M 0 0 1 8 18 42 56 - 0 2 9 24 45 62 64 +125C - 0 0 1 8 17 38 50 +125C Note: FCO = Cut-off Frequency * Consult Amphenol, Sidney, NY for availability. 6 Impedance Matching Formula (your system to a 50 ohm system) The following formula and example are offered in order to determine the expected filter performance in an impedance system other than 50 ohms. With the attenuation expressed in 50 ohms and the transfer impedance curve shown in Figure 1 below, a designer can relate the expressed attenuation to the input and output impedance of his circuit. Example: (1) Noise is 40dB above specification level at 100 MHz (2) Input and output impedance are 10 and 100 ohms respectively Z SZ L Atten (dB) = 20 log10 1 + Z12(Z S + Z L) ZS = source impedance ZL = load impedance Z12 = transfer impedance Atten = filter performance in a system other than 50 ohms 10(100) Atten (dB) = 20 log10 1 + 1.4 x 10-2 (10 + 100) Amphenol(R) VHF 7000 pf filter has a 65 dB minimum attenuation at 100 MHz and +25C Formula (Taken from Figure 1): (3) Attenuation = 56.3dB In this case, the 7000 pf VHF filter will give 56.3 dB which is 16.3dB below the desired reduction in noise (40dB) as stated in the above problem. 1.4 x 102 = transfer impedance for 65 dB in a 50 ohm system Attenuation vs Transfer Impedance in 50 Ohm System 140 120 Attenuation - dB 100 80 60 40 20 0 10 -4 10-3 10-2 10-1 Transfer Impedance - Z 12 Ohms Figure 1 7 10-0 101 Quality Assurance Testing Special Tests/Processes In addition to the standard acceptance testing and processes, the following additional production testing and processing can be provided upon request: * Attenuation testing (through 100 MHz) * Leakage inspection * Thermal cycling/shock * Burn-in * De-gassing Consult Amphenol Aerospace for further information. ACCEPTANCE TESTING All filter connectors undergo extensive acceptance testing to assure product quality. An outline of standard acceptance testing performed is as follows: Mechanical Inspection * Dimensional inspection of shells, keys, keyways and mounting surfaces by either in-process inspection of components or inspection of final assemblies. * Visual inspection of contacts, inserts and seals, gaskets and surface finish of shells and hardware. Qualifications Amphenol(R) filter connectors have been qualified and are on periodic requalification to specification BSF-1 (available from your Amphenol representative). This is patterned after MILDTL-38999, modified to include mechanical and environmental testing and electrical parameters important to filter connector performance. Electrical Tests * Insulation resistance of filter contacts is checked 100% at the working voltage and to the test limit listed for each filter in the filter selection data table. * Dielectric withstanding voltage is tested on 100% of filter contacts at the voltage listed in the filter selection data table. * Capacitance is tested 100% at 1KHz. These acceptance tests, along with exhaustive in-process inspection and testing, give Amphenol(R) filter connectors their reputation for reliability. ATTENUATION TEST CIRCUIT There are multiple test stations located on the Amphenol production floor that support all inprocess, final electric and qualification testing as necessary. 8 Amphenol(R) FCTV Series Composite Tri-Start Subminiature Cylindrical Filters TM The Amphenol(R) FCTV Series is the Composite Tri-Start with filtering for EMI/EMP protection. It offers the same high performance as its metal counterpart, the FTV, but with a lightweight, corrosion resistance shell. * Intermateable with MIL-DTL-38999 Series III connectors (See Catalog 12-092) * Quick Mating - completely mates in a 360 turn of the coupling nut * Lockwiring Eliminated - incorporates anti-decoupling device * Contact Protection - 100% "scoop-proof" * Improved Moisture Resistance - prevents electrolytic erosion of contacts * Lightweight Composite shell - 17% - 70% weight savings over metal * Corrosion Resistant - available in standard MIL-DTL-38999 olive drab cadmium (175C) and electroless nickel plating (200C), both withstanding 2000 hours of salt spray exposure. The base material is able to withstand an indefinite exposure to salt spray. * Durability - 1500 couplings minimum (in reference to connector couplings, not contacts) Composite FCTV Connector for PCB board mounting. Amphenol is currently the only supplier of one-piece composite PCB stand-off shells. FCTV Master Key/Keyway Rotation Key & Keyway arrangement identification letter AR or AP BSC BR or BP BSC CR or CP BSC DR or DP BSC 9 N A B C D E 105 102 80 35 64 91 140 132 118 140 155 131 215 248 230 205 234 197 265 320 312 275 304 240 11, 13, 15 N A B C D E 95 113 90 53 119 51 141 156 145 156 146 141 208 182 195 220 176 184 236 292 252 255 298 242 17 and 19 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 21, 23, 25 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 Shell Size (front face shown) MAIN KEY MAIN KEYWAY PLUG AP BSC BP BSC CP BSC All angles are BSC The insert arrangement does not rotate with main key/keyway. 9 DP BSC RECEPTACLE AR BSC BR BSC DR BSC CR BSC FCTV wall mounting receptacle S 1.240 MAX. R1 M R2 K V THREAD S R1 R2 B THREAD T 4 PLACES TT 4 PLACES .005 M 21-76X0XX-XXX For ordering information see how to order page 72. Shell Size B Thread Class 2A 0.1P-0.3L-TS (Plated) M +.000 -.005 .0025 R1 TP R2 TP K S +.011 -.010 T +.008 -.006 TT +.008 -.006 V Thread Metric (Plated) 9 .6250 .773 .1378 .719 .594 .938 .128 .216 M12X1-6g0.100R 11 .7500 .773 .1378 .812 .719 1.031 .128 .194 M15X1-6g0.100R 13 .8750 .773 .1378 .906 .812 1.125 .128 .194 M18X1-6g0.100R 15 1.0000 .773 .1378 .969 .906 1.219 .128 .173 M22X1-6g0.100R 17 1.1875 .773 .1378 1.062 .969 1.312 .128 .194 M25X1-6g0.100R 19 1.2500 .773 .1378 1.156 1.062 1.438 .128 .194 M28X1-6g0.100R 21 1.3750 .741 .1654 1.250 1.156 1.562 .128 .194 M31X1-6g0.100R 23 1.5000 .741 .1654 1.375 1.250 1.688 .154 .242 M34X1-6g0.100R 25 1.6250 .741 .1654 1.500 1.375 1.812 .154 .242 M37X1-6g0.100R All dimensions for reference only. 10 FCTV jam nut receptacle 1.280 MAX. A .889 MAX. S W Z* FLAT V THREAD B THREAD R THREAD T* H HEX .062 -.125 PANEL THICKNESS 21-76X7XX-XXX * D shaped mounting hole dimensions For ordering information see how to order page 72. Shell Size A Dia. .010 B Thread Class 2A 0.1P-0.3L-TS (Plated) H Hex +.017 -.016 R Thread Metric (Plated) S .015 T* +.010 -.000 V Thread Metric (Plated) W +.035 -.004 Z* Flat +.000 -.010 .669 9 1.188 .6250 .875 M17X1-6g0.100R 1.062 .697 M12X1-6g0.100R .086 11 1.375 .7500 1.000 M20X1-6g0.100R 1.250 .822 M15X1-6g0.100R .086 .769 13 1.500 .8750 1.188 M25X1-6g0.100R 1.375 1.007 M18X1-6g0.100R .086 .955 15 1.625 1.0000 1.312 M28X1-6g0.100R 1.500 1.134 M22X1-6g0.100R .086 1.084 17 1.750 1.1875 1.438 M32X1-6g0.100R 1.625 1.259 M25X1-6g0.100R .086 1.208 19 1.937 1.2500 1.562 M35X1-6g0.100R 1.812 1.384 M28X1-6g0.100R .118 1.333 21 2.062 1.3750 1.688 M38X1-6g0.100R 1.938 1.507 M31X1-6g0.100R .118 1.459 23 2.188 1.5000 1.812 M41X1-6g0.100R 2.062 1.634 M34X1-6g0.100R .118 1.575 25 2.312 1.6250 2.000 M44X1-6g0.100R 2.188 1.759 M37X1-6g0.100R .118 1.709 All dimensions for reference only. 11 FCTV box mount receptacle (printed circuit board mount) S 2 PLACES .673 .002 .132 .020 R1 2 PLACES M SEE NOTE 1 45 K MAX. PANEL THICKNESS B THREAD (4) CORROSION RESISTANT STEEL .112-40 UNC-3B SELF-LOCKING CLINCH NUTS PER MIL-N-45938/6-4C .005 M W 2 PLACES (4) CORROSION RESISTANT STEEL .112-40 UNC-3B INSERTS .005 M T A 21-78X2XX-XXX 1. Standard tail for size 22 is .020 .001 dia. Standard tail for size 20 is .030 .001 dia. For ordering information, see how to order page 72. Shell Size A Dia. .005 B Thread Class 2A 0.1P-0.3L-TS (Plated) M +.000 -.005 K Max. Panel Thickness R1 TP S +.011 -.010 PCB Mounting Dimensions T Dia. TP W TP 9 1.016 .6250 .773 .234 .719 .938 .752 .532 11 1.062 .7500 .773 .234 .812 1.031 .850 .601 13 1.250 .8750 .773 .234 .906 1.125 .994 .703 15 1.375 1.0000 .773 .234 .969 1.219 1.119 .791 17 1.500 1.1875 .773 .234 1.062 1.312 1.237 .875 19 1.625 1.2500 .773 .234 1.156 1.438 1.379 .975 21 1.750 1.3750 .741 .204 1.250 1.562 1.489 1.053 23 1.875 1.5000 .741 .204 1.375 1.688 1.619 1.145 25 2.000 1.6250 .741 .204 1.500 1.812 1.744 1.233 All dimensions for reference only. 12 FCTV jam nut receptacle (printed circuit board mount) .673 .002 A .889 MAX. S .132 .020 45 SEE NOTE 1 Z* FLAT B THREAD T* .062-.125 PANEL THICKNESS R THREAD H HEX W 2 PLACES V (4) CORROSION RESISTANT STEEL .112-40 UNC-3B INSERTS .005 M M 21-78X7XX-XXX 1. Standard tail for size 22 is .020.001 Standard tail for size 20 is .030.001 * "D" shaped mounting hole dimensions For ordering information see how to order page 72. Shell Size A Dia. .005 B Thread Class 2A 0.1P-0.3L-TS (Plated) H Hex +.017 -.016 M Dia. .005 R Thread Metric (Plated) S +.011 -.010 T* Dia. +.010 -.000 PCB Mounting Dimensions W TP V Dia. TP Z* Flat +.000 -.010 9 1.188 .6250 .875 1.016 M17X1-6g0.100R 1.062 .697 .532 .752 .669 11 1.375 .7500 1.000 1.062 M20X1-6g0.100R 1.250 .822 .601 .850 .769 13 1.500 .8750 1.188 1.250 M25X1-6g0.100R 1.375 1.007 .703 .994 .955 15 1.625 1.0000 1.312 1.375 M28X1-6g0.100R 1.500 1.134 .791 1.119 1.084 17 1.750 1.1875 1.438 1.500 M32X1-6g0.100R 1.625 1.259 .875 1.237 1.208 19 1.937 1.2500 1.562 1.625 M35X1-6g0.100R 1.812 1.384 .975 1.379 1.333 21 2.062 1.3750 1.688 1.750 M38X1-6g0.100R 1.937 1.507 1.053 1.489 1.459 23 2.188 1.5000 1.812 1.875 M41X1-6g0.100R 2.062 1.634 1.145 1.619 1.575 25 2.312 1.6250 2.000 2.000 M44X1-6g0.100R 2.188 1.759 1.233 1.744 1.709 All dimensions for reference only. 13 Amphenol(R) FTV Series Tri-Start Subminiature Cylindrical Filters TM The Amphenol(R) FTV Series demonstrates unsurpassed technical leadership. With the added feature of the filter, this high performance general duty threaded connector is designed to withstand the pressures of severe environment applications. * Intermateable with MIL-DTL-38999 Series III connectors (see Catalog 12-092) * Quick Mating - completely mates in a 360 turn of the coupling nut * Lockwiring Eliminated - incorporates anti-decoupling device * Contact Protection - 100% "scoop-proof" * Improved Moisture Resistance - prevents electrolytic erosion of contacts * Corrosion Resistant - 500 hour salt spray olive drab cadmium over nickel plating, class RW, or stainless steel shells FTV Master Key/Keyway Rotation Key & Keyway arrangement identification letter AR or AP BSC BR or BP BSC CR or CP BSC DR or DP BSC 9 N A B C D E 105 102 80 35 64 91 140 132 118 140 155 131 215 248 230 205 234 197 265 320 312 275 304 240 11, 13, 15 N A B C D E 95 113 90 53 119 51 141 156 145 156 146 141 208 182 195 220 176 184 236 292 252 255 298 242 17 and 19 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 21, 23, 25 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 Shell Size (front face shown) MAIN KEY MAIN KEYWAY PLUG AP BSC BP BSC CP BSC All angles are BSC The insert arrangement does not rotate with main key/keyway. 14 DP BSC RECEPTACLE AR BSC BR BSC DR BSC CR BSC FTV wall mounting receptacle S R1 M R2 .896 MAX. R1 S R2 V THREAD B THREAD T 4 PLACES TT 4 PLACES +.006 .905 -.000 .005 M 1.466 MAX. 21-52X0XX-XXX For ordering information, see how to order page 72. Plug movement required to clear FTV receptacles: .625 min. Shell Size B Thread Class 2A 0.1P-0.3L-TS (Plated) M +.000 -.005 R1 TP R2 TP 9 .6250 .820 .719 .594 .938 .128 M12X1-6g0.100R .216 11 .7500 .820 .812 .719 1.031 .128 M15X1-6g0.100R .194 S .010 T +.008 -.006 V Thread Metric (Plated) TT +.008 -.006 13 .8750 .820 .906 .812 1.125 .128 M18X1-6g0.100R .194 15 1.0000 .820 .969 .906 1.219 .128 M22X1-6g0.100R .173 17 1.1875 .820 1.062 .969 1.312 .128 M25X1-6g0.100R .194 19 1.2500 .820 1.156 1.062 1.438 .128 M28X1-6g0.100R .194 21 1.3750 .790 1.250 1.156 1.562 .128 M31X1-6g0.100R .194 23 1.5000 .790 1.375 1.250 1.688 .154 M34X1-6g0.100R .242 25 1.6250 .790 1.500 1.375 1.812 .154 M37X1-6g0.100R .242 All dimensions for reference only. 15 FTV wall mounting receptacle (UTS crimp) S R1 R2 B THREAD R1 S R2 T 4 PLACES V THREAD E TT 4 PLACES .100 MAX. +.006 .905 -.000 .005 M 1.922 MAX. 21-50X0XX-XXX UTS (Crimp) Contact MIL-C-39029/57 For ordering information, see how to order page 72. Shell Size B Thread Class 2A 0.1P-0.3L-TS (Plated) E +.000 -.005 R1 TP R2 TP S .010 T +.008 -.006 V Thread Metric (Plated) TT +.008 -.006 9 .6250 .820 .719 .594 .938 .128 M15X1-6g0.100R .216 11 .7500 .820 .812 .719 1.031 .128 M18X1-6g0.100R .194 13 .8750 .820 .906 .812 1.125 .128 M22X1-6g0.100R .194 15 1.0000 .820 .969 .906 1.219 .128 M25X1-6g0.100R .173 17 1.1875 .820 1.062 .969 1.312 .128 M28X1-6g0.100R .194 19 1.2500 .820 1.156 1.062 1.438 .128 M31X1-6g0.100R .194 21 1.3750 .790 1.250 1.156 1.562 .128 M34X1-6g0.100R .194 23 1.5000 .790 1.375 1.250 1.688 .154 M37X1-6g0.100R .242 25 1.6250 .790 1.500 1.375 1.812 .154 M41X1-6g0.100R .242 All dimensions for reference only. 16 FTV jam nut receptacle C .062 MIN. .125 MAX. PANEL THICKNESS T* .976 MAX. A* B THREAD R THREAD H HEX V THREAD M S 1.466 MAX. 21-52X7XX-XXX * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FTV receptacles: .625 min. Shell Size A* +.000 -.010 B Thread Class 2A 0.1P-0.3L-TS (Plated) C Max H Hex +.017 -.016 M +.011 -.010 R Thread (Plated) S +.011 -.010 T* +.010 -.000 V Thread Metric (Plated) 9 .669 .6250 1.199 .875 .871 M17X1-6g0.100R 1.062 .697 M12X1-6g0.100R 11 .769 .7500 1.386 1.000 .871 M20X1-6g0.100R 1.250 .822 M15X1-6g0.100R 13 .955 .8750 1.511 1.188 .878 M25X1-6g0.100R 1.375 1.007 M18X1-6g0.100R 15 1.084 1.0000 1.636 1.312 .878 M28X1-6g0.100R 1.500 1.134 M22X1-6g0.100R 17 1.208 1.1875 1.761 1.438 .878 M32X1-6g0.100R 1.625 1.259 M25X1-6g0.100R 19 1.333 1.2500 1.949 1.562 .878 M35X1-6g0.100R 1.812 1.384 M28X1-6g0.100R 21 1.459 1.3750 2.073 1.688 .878 M38X1-6g0.100R 1.938 1.507 M31X1-6g0.100R 23 1.575 1.5000 2.199 1.812 .878 M41X1-6g0.100R 2.062 1.634 M34X1-6g0.100R 25 1.709 1.6250 2.323 2.000 .878 M44X1-6g0.100R 2.188 1.759 M37X1-6g0.100R All dimensions for reference only. 17 FTV jam nut receptacle (UTS crimp) C .062 MIN. .125 MAX. PANEL THICKNESS T* A* B THREAD V THREAD R THREAD H HEX .100 MAX. M S 1.922 MAX. 21-50X7XX-XXX UTS (Crimp) Contact MIL-C-39029 * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FTV receptacles: .625 min. Shell Size A* +.000 -.010 B Thread Class 2A 0.1P-0.3L-TS (Plated) C Max H Hex +.017 -.016 M .005 R Thread (Plated) S +.011 -.010 T* +.010 -.000 V Thread Metric (Plated) 9 .669 .6250 1.199 .875 .871 M17X1-6g0.100R 1.062 .697 M15X1-6g0.100R 11 .769 .7500 1.386 1.000 .871 M20X1-6g0.100R 1.250 .822 M18X1-6g0.100R 13 .955 .8750 1.511 1.188 .878 M25X1-6g0.100R 1.375 1.007 M22X1-6g0.100R 15 1.084 1.0000 1.636 1.312 .878 M28X1-6g0.100R 1.500 1.134 M25X1-6g0.100R 17 1.208 1.1875 1.761 1.438 .878 M32X1-6g0.100R 1.625 1.259 M28X1-6g0.100R 19 1.333 1.2500 1.949 1.562 .878 M35X1-6g0.100R 1.812 1.384 M31X1-6g0.100R 21 1.459 1.3750 2.073 1.688 .878 M38X1-6g0.100R 1.938 1.507 M34X1-6g0.100R 23 1.575 1.5000 2.199 1.812 .878 M41X1-6g0.100R 2.062 1.634 M37X1-6g0.100R 25 1.709 1.6250 2.323 2.000 .878 M44X1-6g0.100R 2.188 1.759 M41X1-6g0.100R All dimensions for reference only. 18 FTV box mount receptacle (printed circuit board mount) .673 .002 .830 .005 S .132 .020 K R1 (4) CORROSION RESISTANT STEEL .112-40 UNC-3B CLINCH NUTS .005 M 45 SEE NOTE 1 B THREAD W 2 PLACES .112-40 UNC-3B THREAD .005 M V J 21-80X2XX-XXX 1. Standard tail for size 22 is .020 .001. Standard tail for size 20 is 030 .001. For ordering information, see how to order page 72. PCB Mounting Dimensions Shell Size B Thread Class 2A 0.1P-0.3L-TS (Plated) J Dia. .005 K .005 R1 TP S .010 W TP V Dia. TP 9 .6250 1.016 .085 .719 .938 .532 .752 11 .7500 1.062 .085 .812 1.031 .601 .850 13 .8750 1.250 .085 .906 1.125 .703 .994 15 1.0000 1.375 .085 .969 1.219 .791 1.119 17 1.1875 1.500 .085 1.062 1.312 .875 1.237 19 1.2500 1.625 .085 1.156 1.438 .975 1.379 21 1.3750 1.750 .115 1.250 1.562 1.053 1.489 23 1.5000 1.875 .115 1.375 1.688 1.145 1.619 25 1.6250 2.000 .115 1.500 1.812 1.233 1.744 All dimensions for reference only. 19 FTV jam nut receptacle (printed circuit board mount) .673 .002 .830 .005 A .132 .020 S 45 SEE NOTE 1 Z* FLAT B THREAD W 2 PLACES R THREAD T* H HEX .062-.125 PANEL THICKNESS V J .112-40 UNC-3B THREAD .005 M 21-80X7XX-XXX 1. Standard tail for size 22 is .020 .001. Standard tail for size 20 is .030 .001. * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Shell Size A Dia. .010 B Thread Class 2A 0.1P-0.3L-TS (Plated) H Hex +.017 -.016 J Dia. .005 R Thread Metric (Plated) S .015 T* Dia. +.010 -.000 PCB Mounting Dimensions W TP V Dia. TP Z* Flat +.000 -.010 9 1.188 .6250 .875 1.016 M17X1-6g0.100R 1.062 .697 .532 .752 .669 11 1.375 .7500 1.000 1.062 M20X1-6g0.100R 1.250 .822 .601 .850 .769 13 1.500 .8750 1.188 1.250 M25X1-6g0.100R 1.375 1.007 .703 .994 .955 15 1.625 1.0000 1.312 1.375 M28X1-6g0.100R 1.500 1.134 .791 1.119 1.084 17 1.750 1.1875 1.438 1.500 M32X1-6g0.100R 1.625 1.259 .875 1.237 1.208 19 1.937 1.2500 1.562 1.625 M35X1-6g0.100R 1.812 1.384 .975 1.379 1.333 21 2.062 1.3750 1.688 1.750 M38X1-6g0.100R 1.937 1.507 1.053 1.489 1.459 23 2.188 1.5000 1.812 1.875 M41X1-6g0.100R 2.062 1.634 1.145 1.619 1.575 25 2.312 1.6250 2.000 2.000 M44X1-6g0.100R 2.188 1.759 1.233 1.744 1.709 All dimensions for reference only. 20 Amphenol (R) FJT Series Subminiature Cylindrical Filters The Amphenol(R) FJT Series space and weight saving design, coupled with a filter, gives high reliability. * Intermateable with MIL-DTL-38999/27599 Series II connectors (see Catalog 12-090) * Quick Positive Coupling - 3 point bayonet locking * Error-proof alternate positioning of shell keyways * Higher reliability and greater durability with permanently encapsulated contacts * Environmental Resistant * Aluminum shells with several finish options FJT Master Key/Keyway Rotation AB Angle of Rotation (Degrees) Shell Size Normal A B C D 8 100 82 - - 118 10 100 86 72 128 114 12 100 80 68 132 120 14 100 79 66 134 121 16 100 82 70 130 118 18 100 82 70 130 118 20 100 82 70 130 118 22 100 85 74 126 115 24 100 85 74 126 115 B AB A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The AB angle for a given connector is the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. AB angles shown are viewed from the front face of the connector. A receptacle is shown at right. The angles for the plug are exactly the same, except the direction of rotation is opposite of that shown for the receptacle. NORMAL A D C ROTATION LETTERS 10 JT REF RELATIVE POSSIBLE POSITION OF ROTATED MASTER KEYWAY (front face of receptacle shown) 21 FJT wall mounting receptacle P* Z MAX. N S R .322 +.000 -.005 V THREAD +.006 .380 -.000 S 1.066 MAX. R 21-24X0XX-XXX (MS27334) 21-32X0XX-XXX (MS27334) P* Z MAX. T 4 HOLES .005 M N .322 +.000 -.005 V THREAD +.006 .380 -.000 1.542 MAX. 21-37X0XX-XXX (MS27334) For ordering information, see how to order page 72. Plug movement required to clear FJT receptacles: .281 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF/MF Filters R (TP) S +.011 -.010 T Dia. .005 V Thread UNEF-2A (Plated) .022 .594 .812 .120 .4375-28 .590 .027 .719 .938 .120 .750 .027 .812 1.031 .120 14 .875 .027 .906 1.125 16 1.000 .027 .969 18 1.125 .027 20 1.250 22 1.375 24 1.500 Shell Size N Dia +.001 -.005 P* Max. 8 .473 10 12 LONG SHELL HF Filters Size 16 or 16 & 20 Contacts Z Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Size 20 Contact Z Max. Z Max. Z Max. Z Max. Max. .937 .952 .902 1.300 1.496 .5625-24 .937 .952 .902 1.300 1.496 .6875-24 .937 .952 .902 1.300 1.496 .120 .8125-20 .937 .952 .902 1.300 1.496 1.219 .120 .9375-20 .937 .952 .902 1.300 1.496 1.062 1.312 .120 1.0625-18 .937 .952 .902 1.300 1.496 .054 1.156 1.438 .120 1.1875-18 .937 .952 .902 1.300 1.496 .054 1.250 1.562 .120 1.3125-18 .937 .952 .902 1.300 1.496 .054 1.375 1.688 .147 1.4375-18 .937 .952 .902 1.300 1.496 All dimensions for reference only. 22 FJTP wall mounting receptacle (back panel mounting) .447 W +.000 -.005 P Z MAX. N S S V THREAD +.000 -.005 .505 +.006 -.000 R .322 1.066 MAX. R .447 +.000 -.005 21-34X0XX-XXX (MS27497) 21-39X0XX-XXX (MS27497) P Z MAX. T 4 HOLES .005 M W N V THREAD +.000 -.005 +.006 .505 -.000 .322 1.542 MAX. For ordering information, see how to order page 72. Plug movement required to clear FJT receptacles: .281 min. 21-38X0XX-XXX (MS27497) SHORT SHELL VHF/UHF/MF Filters LONG SHELL HF Filters R (TP) S +.011 -.010 T Dia. .005 V Thread UNEF-2A (Plated) W Dia. +.001 -.005 Size 16 or 16 & 20 Contacts Size 20 or 22 Contact Size 16 or 16 & 20 Contacts Size 20 Contact Z Max. Z Max. Z Max. Z Max. .147 .594 .812 .120 .4375-28 .516 .900 .875 1.385 1.285 .590 .152 .719 .938 .120 .5625-24 .633 .900 .875 1.385 1.285 12 .750 .152 .812 1.031 .120 .6875-24 .802 .900 .875 1.385 1.285 14 .875 .152 .906 1.125 .120 .8125-20 .927 .900 .875 1.385 1.285 16 1.000 .152 .969 1.219 .120 .9375-20 1.052 .900 .875 1.385 1.285 18 1.125 .152 1.062 1.312 .120 1.0625-18 1.177 .900 .875 1.385 1.285 20 1.250 .179 1.156 1.438 .120 1.1875-18 1.302 .900 .875 1.385 1.285 22 1.375 .179 1.250 1.562 .120 1.3125-18 1.427 .900 .875 1.385 1.285 24 1.500 .179 1.375 1.688 .147 1.4375-18 1.552 .900 .875 1.385 1.285 Shell Size N Dia +.001 -.005 P Max. Panel Thickness 8 .473 10 All dimensions for reference only. 23 FJT box mounting receptacle Z MAX. K N S R S .322 +.000 -.005 +.006 .380 -.000 R 21-24X2XX-XXX (MS27335) 21-32X2XX-XXX (MS27335) 1.066 MAX. T HOLES .005 Z MAX. M N K .322 +.000 -.005 +.006 .380 -.000 1.542 MAX. 21-37X2XX-XXX (MS27335) For ordering information, see how to order page 72. Plug movement required to clear FJT receptacles: .281 min. SHORT SHELL VHF/UHF/MF Filters Shell Size K Dia. +.000 -.007 N Dia +.001 -.005 8 .438 10 12 LONG SHELL HF Filters Size 16 or 16 & 20 Contacts Z R (TP) S +.011 -.010 T Dia. .005 Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Size 20 Contact Z Max. Z Max. Z Max. Z Max. Max. .473 .594 .812 .120 .937 .952 .902 1.300 1.496 .562 .590 .719 .938 .120 .937 .952 .902 1.300 1.496 .688 .750 .812 1.031 .120 .937 .952 .902 1.300 1.496 14 .812 .875 .906 1.125 .120 .937 .952 .902 1.300 1.496 16 .938 1.000 .969 1.219 .120 .937 .952 .902 1.300 1.496 18 1.062 1.125 1.062 1.312 .120 .937 .952 .902 1.300 1.496 20 1.188 1.250 1.156 1.438 .120 .937 .952 .902 1.300 1.496 22 1.312 1.375 1.250 1.562 .120 .937 .952 .902 1.300 1.496 24 1.438 1.500 1.375 1.688 .147 .937 .952 .902 1.300 1.496 All dimensions for reference only. 24 FJTP box mounting receptacle (back panel mounting) +.000 .447 -.005 P Z MAX. W N .322 +.000 -.005 K S R .505 R S +.006 -.000 1.066 MAX. 21-34X2XX-XXX (MS27508) 21-39X2XX-XXX (MS27508) +.000 .447 -.005 P Z MAX. T 4 HOLES .005 M W N K +.000 -.005 +.006 .505 -.000 .322 1.542 MAX. 21-38X2XX-XXX (MS27508) For ordering information, see how to order page 72. Plug movement required to clear FJT receptacles: .281 min. SHORT SHELL VHF/UHF/MF Filters LONG SHELL HF Filters R (TP) S +.011 -.010 T Dia. .005 W Dia. +.001 -.005 Size 16 or 16 & 20 Contacts Size 20 or 22 Contact Size 16 or 16 & 20 Contacts Size 20 Contact Z Max. Z Max. Z Max. Z Max. .147 .594 .812 .120 .516 .900 .875 1.385 1.285 .590 .152 .719 .938 .120 .633 .900 .875 1.385 1.285 .688 .750 .152 .812 1.031 .120 .802 .900 .875 1.385 1.285 14 .812 .875 .152 .906 1.125 .120 .927 .900 .875 1.385 1.285 16 .938 1.000 .152 .969 1.219 .120 1.052 .900 .875 1.385 1.285 18 1.062 1.125 .152 1.062 1.312 .120 1.177 .900 .875 1.385 1.285 20 1.188 1.250 .179 1.156 1.438 .120 1.302 .900 .875 1.385 1.285 22 1.312 1.375 .179 1.250 1.562 .120 1.427 .900 .875 1.385 1.285 24 1.438 1.500 .179 1.375 1.688 .147 1.552 .900 .875 1.385 1.285 Shell Size K Dia. +.000 -.007 N Dia +.001 -.005 P Max. Panel Thickness 8 .438 .473 10 .562 12 All dimensions for reference only. 25 FJT jam nut receptacle PANEL THICKNESS .062-.109 3 LOCKWIRE HOLES .059 DIA. MIN. V THREAD S 2 PLACES N H HEX R THREAD Z M 21-24X7XX-XXX (MS27337) 21-32X7XX-XXX (MS27337) 1.066 MAX. A* 3 LOCKWIRE HOLES .059 DIA. MIN. PANEL THICKNESS .062-.109 T* C N V THREAD R THREAD M 1.632 MAX. * "D" shaped mounting hole dimensions 21-37X7XX-XXX (MS27337) For ordering information, see how to order page 72. Plug movement required to clear FJT receptacles: .281 min. SHORT SHELL VHF/UHF/MF Filters A* Flat Shell +.000 Size -.010 LONG SHELL HF Filters S .010 T* Dia. +.010 -.000 V Thread UNEF-2A (Plated) Size 16 or 16 & 20 Contacts Size 20 Contact Size 22 Contact Size 16 or 16 & 20 Contacts Size 20 Contact Z Max. Z Max. Z Max. Z Max. Z Max. .8750-20UNEF 1.250 .884 .4375-28 .900 .884 .849 1.443 1.276 .590 1.0000-20UNEF 1.375 1.007 .5625-24 .900 .884 .849 1.443 1.276 .438 .750 1.1250-18UNEF 1.500 1.134 .6875-24 .900 .884 .849 1.443 1.276 .438 .875 1.2500-18UNEF 1.625 1.259 .8125-20 .900 .884 .849 1.443 1.276 1.333 1.938 1.562 .438 1.000 1.3750-18UNEF 1.781 1.384 .9375-20 .900 .884 .849 1.443 1.276 18 1.459 2.016 1.688 .438 1.125 1.5000-18UNEF 1.890 1.507 1.0625-18 .900 .884 .849 1.443 1.276 20 1.576 2.141 1.812 .464 1.250 1.6250-18UNEF 2.016 1.634 1.1875-18 .874 .858 .823 1.443 1.276 22 1.701 2.265 2.000 .464 1.375 1.7500-18UNS 2.140 1.759 1.3125-18 .874 .858 .823 1.417 1.250 24 1.826 2.390 2.125 .464 1.500 1.8750-16UN 2.265 1.884 1.4375-18 .874 .858 .823 1.417 1.250 M .005 N Dia +.001 -.005 R Thread (Plated) Class -2A .830 1.375 1.062 .438 .473 10 .955 1.500 1.188 .438 12 1.084 1.625 1.312 14 1.208 1.750 1.438 16 H Hex +.017 -.016 8 C Dia. +.011 -.010 All dimensions for reference only. 26 FJTP jam nut receptacle (minimum penetration) 1.361 MAX. 3 LOCKWIRE HOLES .044 DIA. MIN. PANEL THICKNESS .062 -.603 N S 2 PLACES H HEX R THREAD A* 21-24X4XX-XXX 21-32X4XX-XXX Z MIN. M 1.735 MAX. 3 LOCKWIRE HOLES .044 DIA. MIN. PANEL THICKNESS .062 -1.000 T* N C 21-37X4XX-XXX R THREAD Z MIN. M1 * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FJT receptacles: .281 min. SHORT SHELL VHF/UHF/MF Filters A* Flat Shell +.000 Size -.010 C Dia. +.011 -.010 H Hex +.017 -.016 M .005 LONG SHELL HF Filters M .005 N Dia +.001 -.005 R Thread UNEF-2A (Plated) S +.011 -.010 T* Dia. +.010 -.000 Size 16 or 16 & 20 Contacts Size 20 Contact Size 22 Contact Size 16 or 16 & 20 Contacts Size 20 Contact Z Max. 1 Z Max. Z Max. Z Max. Z Max. 8 .542 1.062 .750 1.220 1.594 .473 .5625-24 .938 .572 .000 .022 .057 .000 .000 10 .669 1.188 .875 1.220 1.594 .590 .6875-24 1.062 .697 .000 .022 .057 .000 .000 12 .830 1.375 1.062 1.220 1.594 .750 .8750-20 1.250 .844 .000 .022 .057 .000 .000 14 .955 1.500 1.188 1.220 1.594 .875 1.0000-20 1.375 1.007 .000 .022 .057 .000 .000 16 1.084 1.625 1.312 1.220 1.594 1.000 1.1250-18 1.500 1.134 .000 .022 .057 .000 .000 18 1.208 1.750 1.438 1.220 1.594 1.125 1.2500-18 1.625 1.259 .000 .022 .057 .000 .000 20 1.333 1.938 1.562 1.188 1.563 1.250 1.3750-18 1.812 1.384 .000 .022 .057 .000 .000 22 1.459 2.062 1.688 1.188 1.563 1.375 1.5000-18 1.938 1.507 .000 .022 .057 .000 .000 24 1.575 2.188 1.812 1.188 1.563 1.500 1.6250-18 2.062 1.634 .000 .022 .057 .000 .000 All dimensions for reference only. 27 Amphenol(R) FLJT Series Subminiature Cylindrical Filters The Amphenol(R) FLJT Series offers all the design features of the FJT plus a 100% "scoop-proof" contact protection design. * Intermountable with MIL-DTL-38999/27599 Series I connectors (see Catalog 12-090) * Contact Protection - shell design prevents contact damage * Quick Positive Coupling - 3 point bayonet locking * Higher reliability and greater durability with permanently encapsulated contacts * Environmental Resistant * Aluminum shells with several finish options * Error-proof alternate positioning of shell keyways * Corrosion Resistant - 500 hour salt spray olive drab cadmium over nickel plating, class T (aluminum), or stainless steel shells FLJT Master Key/Keyway Rotation AB Angle of Rotation (Degrees) Shell Size Normal A B C D 9 95 77 - - 113 11 95 81 67 123 109 13 95 75 63 127 115 15 95 74 61 129 116 17 95 77 65 125 113 19 95 77 65 125 113 21 95 77 65 125 113 23 95 80 69 121 110 25 95 80 69 121 110 B AB NORMAL A D C ROTATION LETTERS 5 LJT REF RELATIVE POSSIBLE POSITION OF ROTATED MASTER KEYWAY (front face of receptacle shown) A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The AB angle for a given connector is the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. AB angles shown are viewed from the front face of the connector. A receptacle is shown at right. The angles for the plug are exactly the same, except the direction of rotation is opposite of that shown for the receptacle. 28 FLJT wall mounting receptacle Z MAX. N S R V THREAD M .717 +.005 -.000 21-29X0XX-XXX 21-40X0XX-XXX 1.403 MAX. S R Z MAX. T 4 HOLES N .005 M V THREAD M .717 +.005 -.000 1.403 MAX. 21-36X0XX-XXX For ordering information, see how to order page 72. Plug movement required to clear FLJT receptacles: .625 min. SHORT SHELL VHF/UHF/MF Filters R (TP) S +.011 -.010 T Dia. .005 V Thread UNEF-2A (Plated) .572 .719 .938 .128 .4375-28 .632 .700 .812 1.031 .128 .632 .850 .906 1.125 .128 15 .632 .975 .969 1.219 17 .632 1.100 1.062 19 .632 1.207 21 .602 23 .602 25 .602 Shell Size M +.000 -.006 N Dia. +.001 -.005 9 .632 11 13 LONG SHELL HF Filters Size 16 or 16 & 20 Contacts Z Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Size 20 Contact Z Max. Z Max. Z Max. Z Max. Max. .865 .950 .820 1.324 1.394 .5625-24 .865 .950 .820 1.324 1.394 .6875-24 .865 .950 .820 1.324 1.394 .128 .8125-20 .865 .950 .820 1.324 1.394 1.312 .128 .9375-20 .865 .950 .820 1.324 1.394 1.156 1.438 .128 1.0625-18 .865 .950 .820 1.324 1.394 1.332 1.250 1.562 .128 1.1875-18 .865 .950 .820 1.324 1.394 1.457 1.375 1.688 .147 1.3125-18 .865 .950 .820 1.324 1.394 1.582 1.500 1.812 .147 1.4375-18 .865 .950 .820 1.324 1.394 All dimensions for reference only. 29 FLJTPQ wall mounting receptacle (back panel mounting, UTS crimp) P* Z MAX. N S R M V THREAD .905 +.005 -.000 1.403 MAX. S R 21-47X0XX-XXX P* .100 MAX. T 4 HOLES N D .005 M .921 +.005 -.000 1.021 V 1 THREAD +.006 -.000 21-48X0XX-XXX UTS (Crimp) Contact MIL-C-32029/57 1.921 MAX. For ordering information, see how to order page 72. Plug movement required to clear FLJT receptacles: .625 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF Filters 1 R (TP) S +.011 -.010 T Dia. .005 V Thread UNEF-2A (Plated) V Thread UNEF-2A (Plated) Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Z Max. Z Max. Z Max. .234 .719 .938 .128 .4375-28 .5625-24 .672 .763 .632 .700 .234 .812 1.031 .128 .5625-24 .6875-24 .672 .763 .632 .820 .850 .234 .906 1.125 .128 .6875-24 .8125-20 .672 .763 .632 .820 .975 .234 .969 1.219 .128 .8125-20 .9375-20 .672 .763 .632 .791 .820 1.100 .234 1.062 1.312 .128 .9375-20 1.0625-18 .672 .763 .632 19 .897 .820 1.207 .234 1.156 1.438 .128 1.0625-18 1.1875-18 .672 .763 .632 21 1.022 .790 1.332 .204 1.250 1.562 .128 1.1875-18 1.3125-18 .672 .763 .632 23 1.147 .790 1.457 .204 1.375 1.688 .147 1.3125-18 1.4375-18 .672 .763 .632 25 1.272 .790 1.582 .193 1.500 1.812 .147 1.4375-18 1.5625-18 .672 .763 .632 Shell Size D Dia. .005 M +.000 -.006 N Dia. +.001 -.005 P Max. Panel Thickness 9 .299 .820 .572 11 .427 .820 13 .541 15 .666 17 All dimensions for reference only. 30 FLJT box mounting receptacle Z MAX. K N S R M .717 +.005 -.000 S 21-29X2XX-XXX 21-40X2XX-XXX 1.403 MAX. R Z MAX. T 4 HOLES .005 M N K M .717 +.005 -.000 1.931 MAX. 21-36X2XX-XXX For ordering information, see how to order page 72. Plug movement required to clear FLJT receptacles: .625 min. SHORT SHELL VHF/UHF/MF Filters Shell Size K Dia. +.001 -.006 M +.000 -.006 N Dia. +.001 -.005 9 .436 .632 11 .560 13 .686 15 LONG SHELL HF Filters Size 16 or 16 & 20 Contacts Z R (TP) S +.011 -.010 T Dia. .005 Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Size 20 Contact Z Max. Z Max. Z Max. Z Max. Max. .572 .719 .938 .128 .865 .950 .820 1.324 1.394 .632 .700 .812 1.031 .128 .865 .950 .820 1.324 1.394 .632 .850 .906 1.125 .128 .865 .950 .820 1.324 1.394 .810 .632 .975 .969 1.219 .128 .865 .950 .820 1.324 1.394 17 .936 .632 1.100 1.062 1.312 .128 .865 .950 .820 1.324 1.394 19 1.060 .632 1.207 1.156 1.438 .128 .865 .950 .820 1.324 1.394 21 1.186 .602 1.332 1.250 1.562 .128 .865 .950 .820 1.324 1.394 23 1.310 .602 1.457 1.375 1.688 .147 .865 .950 .820 1.324 1.394 25 1.436 .602 1.582 1.500 1.812 .147 .865 .950 .820 1.324 1.394 All dimensions for reference only. 31 FLJTP box mounting receptacle (back panel mounting, UTS crimp) P* Z MAX. N K S R M 21-47X2XX-XXX .905 +.005 -.000 S 1.403 MAX. R .100 MAX. P* T 4 HOLES .005 M N K1 D .921 +.005 -.000 1.021 +.006 -.000 21-48X2XX-XXX UTS (Crimp) Contact MIL-C-32029/57 1.921 MAX. For ordering information, see how to order page 72. Plug movement required to clear FLJT receptacles: .625 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF Filters 1 Shell Size D Dia. .005 K Dia. +.000 -.006 K Dia. +.000 -.007 M +.000 -.006 N Dia. +.001 -.005 P Max. Panel Thickness 9 .299 .437 .561 .820 .572 11 .427 .562 .687 .820 13 .541 .688 .811 15 .666 .812 17 .791 .938 R (TP) S +.011 -.010 T Dia. .005 Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Z Max. Z Max. Z Max. .234 .719 .938 .128 .672 .763 .632 .700 .234 .812 1.031 .128 .672 .763 .632 .820 .850 .234 .906 1.125 .128 .672 .763 .632 .937 .820 .975 .234 .969 1.219 .128 .672 .763 .632 1.061 .820 1.100 .234 1.062 1.312 .128 .672 .763 .632 19 .897 1.062 1.187 .820 1.207 .234 1.156 1.438 .128 .672 .763 .632 21 1.022 1.188 1.312 .790 1.332 .204 1.250 1.562 .128 .672 .763 .632 23 1.147 1.312 1.437 .790 1.457 .204 1.375 1.688 .147 .672 .763 .632 25 1.272 1.438 1.562 .790 1.582 .193 1.500 1.812 .147 .672 .763 .632 All dimensions for reference only. 32 FLJT box mounting receptacle (printed circuit board mount) T 4 HOLES G M .005 M 45 +.006 .905 -.000 R S .154 .020 SEE NOTE 1 N R W 4-40 UNC-3B THREAD 4 PLACES, EQUALLY SPACED S 21-57X2XX-XXX 1. Standard tail for size 22 is .020 .001 dia. Standard tail for size 22 is .030 .001 dia. For ordering information, see how to order page 72. Plug movement required to clear FLJT receptacles: .625 min. R (TP) S +.011 -.010 T Dia. +.004 -.003 W .700 .812 1.031 .128 .850 .820 .850 .906 1.125 .128 .994 .820 .975 .969 1.219 .128 1.119 .689 .820 1.100 1.062 1.312 .128 1.237 .689 .820 1.207 1.156 1.438 .128 1.379 21 .689 .790 1.332 1.250 1.562 .128 1.489 23 .719 .790 1.457 1.375 1.688 .147 1.619 25 .719 .790 1.582 1.500 1.812 .147 1.744 Shell Size G +.006 -.005 M +.000 -.005 N Dia. +.001 -.005 11 .689 .820 13 .689 15 .689 17 19 All dimensions for reference only. 33 FLJT jam nut receptacle .915 .005 PANEL THICKNESS .062 -.0125 .044 DIA. MIN. 3 LOCKWIRE HOLES S 2 PLACES Z MAX N H HEX R THREAD V THREAD 21-29X7XX-XXX 21-40X7XX-XXX 1.403 MAX. A* .915 .005 PANEL THICKNESS .062 -.0125 .044 DIA. MIN. 3 LOCKWIRE HOLES Z MAX. T* C N R THREAD V THREAD 1.931 MAX. 21-36X7XX-XXX * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FLJT receptacles: .625 min. SHORT SHELL VHF/UHF/MF Filters A* Flat Shell +.000 Size -.010 LONG SHELL HF Filters C Dia. +.011 -.010 H Hex +.017 -.016 N Dia +.001 -.005 R Thread (Plated) Class -2A S +.016 -.015 T* Dia. +.010 -.000 V Thread UNEF-2A (Plated) Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Size 20 Contact Size 16 or 16 & 20 Contacts Z Max. Z Max. Z Max. Z Max. Z Max. .669 1.188 .875 .572 .6875-24UNEF 1.062 .697 .4375-28 .667 .756 .616 1.228 1.201 11 .769 1.375 1.000 .700 .8125-20UNEF 1.250 .822 .5625-24 .667 .756 .616 1.228 1.201 13 .955 1.500 1.188 .850 1.0000-20UNEF 1.375 1.007 .6875-24 .667 .756 .616 1.228 1.201 15 1.084 1.625 1.312 .975 1.1250-18UNEF 1.500 1.134 .8125-20 .667 .756 .616 1.228 1.201 17 1.208 1.750 1.438 1.100 1.2500-18UNEF 1.625 1.259 .9375-20 .667 .756 .616 1.228 1.201 19 1.333 1.938 1.562 1.207 1.3750-18UNEF 1.812 1.384 1.0625-18 .667 .756 .616 1.228 1.201 21 1.459 2.062 1.688 1.332 1.5000-18UNEF 1.938 1.507 1.1875-18 .667 .756 .616 1.228 1.201 23 1.580 2.188 1.812 1.457 1.6250-18UNEF 2.062 1.634 1.3125-18 .667 .756 .616 1.228 1.201 25 1.709 2.312 2.000 1.582 1.7500-18UNS 2.188 1.759 1.4375-18 .667 .756 .616 1.228 1.201 9 All dimensions for reference only. 34 FLJTPQ jam nut receptacle (UTS crimp) S 2 PLACES H HEX PANEL THICKNESS .062 -.125 .100 MAX. A* D N R THREAD .921 T* V THREAD +.005 -.000 G C 1.922 MAX. 21-48X7XX-XXX UTS (Crimp) Contact MIL-C-39029/57 * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FLJT receptacles: .625 min. Shell Size A* Flat +.000 -.010 C Dia. +.011 -.010 D Dia. .005 G +.006 -.005 H Hex +.017 -.016 N Dia +.001 -.005 R Thread (Plated) Class -2A S +.016 -.015 T* Dia. +.010 -.000 V Thread UNEF-2A (Plated) 9 .669 1.188 .299 1.030 .875 .572 .6875-24UNEF 1.062 .697 .5625-24 11 .769 1.375 .427 1.030 1.000 .700 .8125-20UNEF 1.250 .822 .6875-24 13 .955 1.500 .541 1.030 1.188 .850 1.0000-20UNEF 1.375 1.007 .8125-20 15 1.084 1.625 .666 1.030 1.312 .975 1.1250-18UNEF 1.500 1.134 .9375-20 17 1.208 1.750 .791 1.030 1.438 1.100 1.2500-18UNEF 1.625 1.259 1.0625-18 19 1.333 1.938 .897 1.061 1.562 1.207 1.3750-18UNEF 1.812 1.384 1.1875-18 21 1.459 2.062 1.022 1.061 1.688 1.332 1.5000-18UNEF 1.938 1.507 1.3125-18 23 1.580 2.188 1.147 1.061 1.812 1.457 1.6250-18UNEF 2.062 1.634 1.4375-18 25 1.709 2.312 1.272 1.061 2.000 1.582 1.7500-18UNS 2.188 1.759 1.5625-18 All dimensions for reference only. 35 FLJT jam mounting receptacle (printed circuit board mount) 1.183 .005 .326 .002 .110 S +.000 .932 -.010 SEE NOTE 1 B 2 PLACES N 45 RR THREAD 4-40 UNC-3B THREAD 4 SPACES EQUALLY SPACED 21-57X4XX-XXX SPANNER NUT .075 MAX. BULKHEAD .125 .005 .326 .002 .836 .005 W .673 .002 .110 S .575 .010 B 2 PLACES N SEE NOTE 1 RR THREAD SPANNER NUT .075 MAX. BULKHEAD .125 .005 1. Standard tail for size 22 is .020 .001 dia. Standard tail for size 22 is .030 .001 dia. For ordering information, see how to order page 72. Plug movement required to clear FLJT receptacles: .625 min. Shell Size B Dia. .005 N Dia. +.001 -.005 S .020 W 11 1.062 .700 .132 .850 .8125-20 13 1.250 .850 .132 .994 1.0000-20 15 1.375 .975 .132 1.119 1.1250-20 17 1.500 1.100 .132 1.237 1.2500-18 19 1.625 1.207 .132 1.379 1.3750-18 21 1.750 1.332 .132 1.489 1.5000-18 23 1.875 1.457 .132 1.619 1.6250-18 25 2.000 1.582 .132 1.744 1.7500-18 All dimensions for reference only. 36 RR Thread UNEF-2A 21-57X7XX-XXX FLJT jam nut receptacle (minimum penetration) M PANEL THICKNESS .062 to .603 Sizes 9-19 .062 to 572 Sizes 21-25 S 2 PLACES H HEX .044 DIA. MIN. 3 LOCKWIRE HOLES Z MIN. N A* R THREAD T* 1.686 MAX. C 21-29X4XX-XXX * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FLJT receptacles: .625 min. SHORT SHELL VHF/UHF Filters Shell Size A* Flat +.000 -.010 C Dia. +.011 -.010 H Hex +.017 -.016 M .005 N Dia +.001 -.005 R Thread (Plated) Class -2A S +.016 -.015 T* Dia. +.010 -.000 Size 16 Contact Size 16 or 16 & 20 Contacts Size 20 Contact Size 22 Contact 9 .669 1.188 Z Max. Z Max. Z Max. Z Max. .875 1.557 .572 .6875-24UNEF 1.062 .697 .000 .000 .000 11 .769 .000 1.375 1.000 1.557 .700 .8125-20UNEF 1.250 .822 .000 .000 .000 .000 13 15 .955 1.500 1.188 1.557 .850 1.0000-20UNEF 1.375 1.007 .000 .000 .000 .000 1.084 1.625 1.312 1.557 .975 1.1250-18UNEF 1.500 1.134 .000 .000 .000 17 .000 1.208 1.750 1.438 1.557 1.100 1.2500-18UNEF 1.625 1.259 .000 .000 .000 .000 19 1.333 1.938 1.562 1.557 1.207 1.3750-18UNEF 1.812 1.384 .000 .000 .000 .000 21 1.459 2.062 1.688 1.525 1.332 1.5000-18UNEF 1.938 1.507 .000 .000 .000 .000 23 1.580 2.188 1.812 1.525 1.457 1.6250-18UNEF 2.062 1.634 .000 .000 .000 .000 25 1.709 2.312 2.000 1.525 1.582 1.7500-18UNS 2.188 1.759 .000 .000 .000 .000 All dimensions for reference only. 37 Amphenol (R) FSJT Series Subminiature Cylindrical Filters The Amphenol(R) FSJT Series combines the unique design features of the scoop-proof FLJT Series with the standard mounting dimensions of JT types. (See SJT Catalog 12091) * 100% scoop-proof design * Standard mounting dimensions * Compliance with European Specifications PAN6433-2, LN29729, BS9522 F0012, VG96912 * Uses proven filter technology with available components from other series * EMP protection versions available FSJT Master Key/Keyway Rotation AB Angle of Rotation (Degrees) Shell Size Normal A B C D 8 95 - - - - 10 95 81 67 123 109 12 95 75 63 127 115 14 95 74 61 129 116 16 95 77 65 125 113 18 95 77 65 125 113 20 95 77 65 125 113 22 95 80 69 121 110 24 95 80 69 121 110 B AB NORMAL A D C ROTATION LETTERS 5 REF RELATIVE POSSIBLE POSITION OF ROTATED MASTER KEYWAY (front face of receptacle shown) A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The AB angle for a given connector is the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. AB angles shown are viewed from the front face of the connector. A receptacle is shown at right. The angles for the plug are exactly the same, except the direction of rotation is opposite of that shown for the receptacle. 38 FSJT wall mounting receptacle T DIA. 4 HOLES .005 M V THREAD Z S N R .312 MIN. FULL THREAD M R .717 +.006 -.000 S 1.506 MAX. 21-63X0XX-XXX For ordering information, see how to order page 72. Plug movement required to clear FSJT receptacles: .625 min. T Dia. +.004 -.003 Z Max. Shell Size M +.000 -.005 N Dia. +.001 -.005 R (TP) 10 .632 .590 .719 .938 .120 .5625-24 .165 .265 .134 12 .632 .750 .812 1.031 .120 .6875-24 .165 .265 .134 S +.021 -.020 V Thread UNEF-2A Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact 14 .632 .875 .906 1.125 .120 .8125-20 .165 .265 .134 16 .632 1.000 .969 1.219 .120 .9375-20 .165 .265 .134 18 .632 1.125 1.062 1.312 .120 1.0625-18 .165 .265 .134 20 .602 1.250 1.156 1.438 .120 1.1875-18 .165 .265 .134 22 .602 1.375 1.250 1.562 .120 1.3125-18 .165 .265 .134 24 .602 1.500 1.375 1.688 .147 1.4375-18 .165 .265 .134 All dimensions for reference only. 39 FSJT wall mounting receptacle (UTS crimp) T DIA. 4 HOLES V THREAD .005 M .100 MAX. S R D N .312 MIN. FULL THREAD M R .717 +.006 -.000 S 1.922 MAX. 21-65X0XX-XXX UTS (Crimp) Contact MIL-C-39029/57 For ordering information, see how to order page 72. Plug movement required to clear FSJT receptacles: .625 min. T Dia. +.004 -.003 Shell Size D Dia. .005 M +.000 -.005 N Dia. +.001 -.005 R (TP) 10 .427 .632 .590 .719 .938 .120 .6875-24 12 .541 .632 .750 .812 1.031 .120 .8125-20 14 .666 .632 .875 .906 1.125 .120 .9375-20 16 .791 .632 1.000 .969 1.219 .120 1.0625-18 18 .897 .632 1.125 1.062 1.312 .120 1.1875-18 20 1.022 .602 1.250 1.156 1.438 .120 1.3125-18 22 1.147 .602 1.375 1.250 1.562 .120 1.4375-18 24 1.272 .602 1.500 1.375 1.688 .147 1.5625-18 All dimensions for reference only. 40 S +.021 -.020 V Thread UNEF-2A FSJT box mounting receptacle T DIA. 4 HOLES .005 M Z S EE N R M R .717 +.006 -.000 S 1.506 MAX 21-63X2XX-XXX For ordering information, see how to order page 72. Plug movement required to clear FSJT receptacles: .625 min. Shell Size M +.000 -.005 N Dia. +.001 -.005 R (TP) S +.021 -.020 T Dia. +.004 -.003 Z Max. EE +.001 -.005 Size 16 Contact Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact 10 .632 .590 .719 .938 .120 .562 .265 .165 .265 .134 12 .632 .750 .812 1.031 .120 .687 .265 .165 .265 .134 14 .632 .875 .906 1.125 .120 .812 .265 .165 .265 .134 16 .632 1.000 .969 1.219 .120 .937 .265 .165 .265 .134 18 .632 1.125 1.062 1.312 .120 1.062 .265 .165 .265 .134 20 .602 1.250 1.156 1.438 .120 1.187 .265 .165 .265 .134 22 .602 1.375 1.250 1.562 .120 1.312 .265 .165 .265 .134 24 .602 1.500 1.375 1.688 .147 1.437 .265 .165 .265 .134 All dimensions for reference only. 41 FSJT box mounting receptacle (UTS crimp) T DIA. 4 HOLES .005 M .100 MAX. S R N D EE M R .717 +.006 -.000 S 1.922 MAX. 21-65X2XX-XXX UTS (Crimp) Contact MIL-C-39029/57 For ordering information, see how to order page 72. Plug movement required to clear FSJT receptacles: .625 min. T Dia. +.004 -.003 EE Dia. +.001 -.005 Shell Size D Dia. .005 M +.000 -.005 N Dia. +.001 -.005 R (TP) 10 .427 .632 .590 .719 .938 .120 .687 12 .541 .632 .750 .812 1.031 .120 .811 14 .666 .632 .875 .906 1.125 .120 .937 16 .791 .632 1.000 .969 1.219 .120 1.061 S +.021 -.020 18 .897 .632 1.125 1.062 1.312 .120 1.187 20 1.022 .602 1.250 1.156 1.438 .120 1.312 22 1.147 .602 1.375 1.250 1.562 .120 1.437 24 1.272 .602 1.500 1.375 1.688 .147 1.562 All dimensions for reference only. 42 FSJT jam nut receptacle P T* RR THREAD V THREAD GG BB * N .915 +.006 -.005 S 2 PLACES Z K 1.506 MAX. 21-63X7XX-XXX * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FSJT receptacles: .625 min. Shell Size K +.006 -.005 N Dia. +.001 -.005 10 1.024 12 1.024 14 V Thread UNEF Class 2A GG Max. SS +.001 -.016 P Hex S .016 .590 .875 1.062 .697 .5625-24 .150 .669 1.203 .6875-24 .680 .750 1.062 1.250 .884 .6875-24 .150 .830 1.391 .8750-20 .859 1.024 .875 1.188 1.375 1.007 .8125-20 .150 .955 1.515 1.0000-20 .984 16 1.024 1.000 1.312 1.500 1.134 .9375-20 .150 1.084 1.641 1.1250-18 1.108 18 1.055 1.125 1.438 1.625 1.259 1.0625-18 .150 1.208 1.766 1.2500-18 1.233 20 1.055 1.250 1.562 1.812 1.384 1.1875-18 .150 1.333 1.953 1.3750-18 1.358 22 1.055 1.375 1.688 1.938 1.507 1.3125-18 .150 1.459 2.078 1.5000-18 1.483 24 1.055 1.500 1.812 2.062 1.634 1.4375-18 .150 1.580 2.203 1.6250-18 1.610 All dimensions for reference only. 43 Z .020 BB* +.000 -.010 RR Thread UNEF Class 2A T* +.010 -.000 Amphenol(R) FBL Series IV Subminiature Cylindrical Filters Components designed to meet the severe mechanical and environmental requirements of MIL-DTL-38999 Series III are now available to Series IV users. Modifications of the connector are available with EMP protection, incorporating MOV's, diodes or a combination of both. * Intermateable with MIL-DTL-38999 Series IV plugs * Maintains all the features of standard MIL-DTL-38999 Series IV receptacles * Scoop-proof pins provide contact protection * Uses insert patterns from MIL-DTL-38999 Series III FBL Master Key/Keyway Rotation Receptacle Key Position Shell Size PP QQ RR Polarity Dimensions Main Key Receptacle/Basic SS Socket Contact T1 Pin Contact T2 11 4428' 1516' 20854' 31532' .075 .109 13 4425' 15031' 20929' 31535' .076 .112 15 4433' 15024' 20936' 31527' .096 .132 17 4436' 15022' 20938' 31524' .096 .134 19 4433' 15027' 20933' 31527' .117 .154 21 4434' 15023' 20937' 31526' .118 .155 23 4434' 15020' 20940' 31526' .138 .176 25 4442' 15022' 20948' 31518' .139 .177 Key and Keyway Arrangement XX YY N 110 250 A 100 260 B 90 270 C 80 280 D 70 290 K 120 255 T1 or T2 PP SS XX QQ YY RR RELATIVE POSSIBLE POSITION OF KEYWAYS (front face of receptacle shown) 44 FBL box mounting receptacle wall mounting receptacle 1.425 MAX. M K Z VV S R EE R BOX MOUNT 21-61X2XX-XXX T DIA. 4 HOLES S .005 M 1.425 MAX. M K Z VV V THREAD WALL MOUNT 21-61X0XX-XXX For ordering information, see how to order page 72. Z Max. T Dia. +.004 -.003 V Thread (Plated) -.006 EE Dia. +.001 -.005 VV .003 Size 16 Contact Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Shell Size K .010 M .020 R (TP) S +.021 -.020 11 .092 .791 .812 1.029 .128 M15X1-6g0.100R .589 .672 .265 .165 .265 .134 13 .092 .791 .906 1.124 .128 M18X1-6g0.100R .707 .672 .265 .165 .265 .134 15 .092 .791 .969 1.218 .128 M22X1-6g0.100R .865 .672 .265 .165 .265 .134 17 .092 .791 1.062 1.313 .128 M25X1-6g0.100R .983 .672 .265 .165 .265 .134 19 .092 .791 1.156 1.439 .128 M28X1-6g0.100R 1.101 .662 .265 .165 .265 .134 21 .124 .791 1.250 1.561 .128 M31X1-6g0.100R 1.219 .662 .265 .165 .265 .134 23 .124 .791 1.375 1.687 .147 M34X1-6g0.100R 1.337 .662 .265 .165 .265 .134 25 .124 .791 1.500 1.813 .147 M37X1-6g0.100R 1.455 .662 .265 .165 .265 .134 All dimensions for reference only. 45 FBL box mounting receptacle (UTS crimp) wall mounting receptacle (UTS crimp) 1.950 MAX. K M .100 MAX. VV S R D EE GROMMET R T DIA. 4 HOLES S BOX MOUNT 21-64X2XX-XXX UTS (Crimp) Contact MIL-C-39029/57 .005 M 1.950 MAX. K M .100 MAX. VV D EE GROMMET V THREAD BOX MOUNT 21-64X0XX-XXX UTS (Crimp) Contact MIL-C-39029/57 For ordering information, see how to order page 72. R (TP) S +.021 -.020 T Dia. +.004 -.003 V Thread (Plated) -.006 EE Dia. +.001 -.005 VV .003 .791 .812 1.029 .128 M18X1-6g0.100R .687 .672 .791 .906 1.124 .128 M22X1-6g0.100R .811 .672 .092 .791 .969 1.218 .128 M25X1-6g0.100R .937 .672 .791 .092 ,791 1.062 1.313 .128 M28X1-6g0.100R 1.061 .672 19 .897 .092 .791 1.156 1.439 .128 M31X1-6g0.100R 1.187 .662 21 1.022 .124 .791 1.250 1.561 .128 M34X1-6g0.100R 1.312 .662 23 1.147 .124 .791 1.375 1.687 .147 M37X1-6g0.100R 1.437 .662 25 1.272 .124 .791 1.500 1.813 .147 M41X1-6g0.100R 1.562 .662 Shell Size D Dia. .005 K .010 M .020 11 .427 .092 13 .541 .092 15 .666 17 All dimensions for reference only. 46 Amphenol(R) FPT Series Miniature Cylindrical Filters The Amphenol(R) FPT Series combines the unique design features of the miniature PT Series with an EMI filter. * Intermateable with MIL-C-26482 Series connectors (see Catalog 12-070), and MIL-C-83723 Series I connectors (see Catalog MS-102) * Quick positive coupling with visual confirmation of mating * Higher reliability and greater durability with permanently encapsulated contacts * Aluminum shells with several finish options FPT Alternate Positions Degrees 10-6 90 - - - 10-98 90 180 240 270 12-3 - - 180 - 12-8 90 112 203 292 12-10 60 155 270 295 12-98 61 135 189 340 14-12 434 90 - - 14-18 15 90 180 270 14-19 30 165 315 - 16-8 54 152 180 331 16-26 60 - 275 338 18-32 85 138 222 265 20-41 45 126 225 - 22-41 39 - - - 22-55 30 142 226 314 24-61 90 180 270 324 Master Keyway Master Keyway Master Keyway Master Keyway B 270 POSITION W POSITION X A 180 B 151 B Z 45 A Y 10-5 B X A W A Insert Arrangements POSITION Y POSITION Z Views looking into front face of pin insert or rear of socket insert. 47 FPT wall mounting receptacle P* Z MAX. N S R V THREAD M J S L MAX. R 21-20X0XX-XXX 21-31X0XX-XXX P* Z MAX. T DIA. 4 HOLES .005 M N V THREAD M J L1 MAX. 21-33X0XX-XXX For ordering information, see how to order page 72. Plug movement required to clear FPT receptacles: .438 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF/MF Filters R (TP) S +.011 -.010 T Dia. .005 V Thread UNEF-2A (Plated) L Max. .087 .594 .812 .120 .4375-28 .590 .087 .719 .938 .120 .431 .750 .087 .812 1.031 .431 .875 .087 .906 1.125 .493 .431 1.000 .087 .969 18 .493 .431 1.125 .087 20 .650 .556 1.250 22 .650 .556 24 .683 .589 Shell Size J +.021 -.010 M +.010 -.000 N Dia +.001 -.005 P* Max. 8 .493 .431 .473 10 .493 .431 12 .493 14 .493 16 LONG SHELL HF Filters Size 20 Contact Size 16 or 16 & 20 Contacts Z Max. Z Max. L Max. 1.103 .850 .904 1.588 1.258 1.328 .5625-24 1.103 .850 .904 1.588 1.258 1.328 .120 .6875-24 1.103 .850 .904 1.588 1.258 1.328 .120 .8125-20 1.103 .850 .904 1.588 1.258 1.328 1.219 .120 .9375-20 1.103 .850 .904 1.588 1.258 1.328 1.062 1.312 .120 1.0625-18 1.103 .850 .904 1.588 1.258 1.328 .212 1.156 1.438 .120 1.1875-18 1.166 .755 .809 1.651 1.163 1.233 1.375 .212 1.250 1.562 .120 1.3125-18 1.166 .755 .809 1.651 1.163 1.233 1.500 .212 1.375 1.688 .147 1.4375-18 1.166 .722 .776 1.651 1.130 1.200 All dimensions for reference only. 48 1 Size 20 Contact Size 16 or 16 & 20 Contacts Z Max. Z Max. FPT box mounting receptacle P* Z MAX. N K S R M J S 21-20X2XX-XXX 21-31X2XX-XXX L MAX. R P* Z MAX. T DIA. 4 HOLES .005 M N K M J L1 MAX. 21-33X2XX-XXX For ordering information, see how to order page 72. Plug movement required to clear FPT receptacles: .438 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF/MF Filters Shell Size J +.021 -.010 K Dia. +.011 -.000 M +.010 -.000 N Dia +.001 -.005 P* Max. 8 .493 .438 .431 .473 10 .493 .562 .431 12 .493 .688 14 .493 16 LONG SHELL HF Filters Size 20 Contact Size 16 or 16 & 20 Contacts Size 20 Contact Size 16 or 16 & 20 Contacts Z Max. Z Max. L Max. 1.103 .850 .904 1.588 Z Max. Z Max. 1.258 .120 1.103 .850 .904 1.328 1.588 1.258 1.031 .120 1.103 .850 1.328 .904 1.588 1.258 .906 1.125 .120 1.103 1.328 .850 .904 1.588 1.258 .087 .969 1.219 .120 1.328 1.103 .850 .904 1.588 1.258 1.125 .087 1.062 1.312 1.328 .120 1.103 .850 .904 1.588 1.258 .556 1.250 .212 1.156 1.328 1.438 .120 1.166 .755 .809 1.651 1.163 1.312 .556 1.375 .212 1.233 1.250 1.562 .120 1.166 .755 .809 1.651 1.163 1.438 .589 1.500 .212 1.233 1.375 1.688 .147 1.166 .722 .776 1.651 1.130 1.200 R (TP) S +.011 -.010 T Dia. .005 L Max. .087 .594 .812 .120 .590 .087 .719 .938 .431 .750 .087 .812 .812 .431 .875 .087 .493 .938 .431 1.000 18 .493 1.062 .431 20 .650 1.188 22 .650 24 .683 All dimensions for reference only. 49 1 FPT jam nut receptacle PANEL THICKNESS .062 -.125 3 LOCKWIRE HOLES .059 DIA. MIN. Z MAX. K N S 2 PLACES H HEX Y THREAD M 21-20X7XX-XXX 21-31X7XX-XXX J A* L PANEL THICKNESS .062 -.125 3 LOCKWIRE HOLES .059 DIA. MIN. Z MAX. T* C K N Y THREAD M J 21-33X7XX-XXX L1 MAX. * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FPT receptacles: .438 min. SHORT SHELL VHF/UHF/MF Filters A* Flat Shell +.000 Size -.010 S .010 T* Dia. +.010 -.000 Y Thread UNEF-2A (Plated) L Max. .938 .572 .5625-24 .696 .590 1.062 .697 .688 .696 .750 1.250 .821 .812 1.084 1.625 1.312 .821 18 1.208 1.750 1.438 M .005 N Dia +.001 -.005 .438 .696 .473 .821 .562 .830 1.375 1.062 .821 14 .955 1.500 1.188 16 C Dia. +.011 -.010 H Hex +.017 -.016 J +.006 -.005 K Dia. +.011 -.000 8 .542 1.062 .750 .821 10 .669 1.188 .875 12 LONG SHELL HF Filters Size 20 Contact Size 16 or 16 & 20 Contacts Size 20 Contact Size 16 or 16 & 20 Contacts Z Max. Z Max. L Max. 1.103 .642 .698 1.588 Z Max. Z Max. 1.050 .6875-24 1.103 .642 .698 1.120 1.588 1.050 .884 .8750-20 1.103 .642 1.120 .698 1.588 1.050 .696 .875 1.375 1.009 1.0000-20 1.103 1.120 .642 .698 1.588 1.050 .938 .696 1.000 1.500 1.134 1.1250-18 1.120 1.103 .642 .698 1.588 1.050 .821 1.062 .696 1.125 1.625 1.259 1.120 1.2500-18 1.103 .642 .698 1.588 1.050 1.120 20 1.333 1.938 1.562 1.040 1.188 .884 22 1.459 2.062 1.688 1.040 1.312 .884 1.250 1.812 1.384 1.3750-18 1.166 .516 .570 1.651 .924 .994 1.375 1.938 1.509 1.5000-18 1.166 .516 .570 1.651 .924 24 1.575 2.188 1.812 1.073 1.438 .917 .994 1.500 2.062 1.634 1.6250-18 1.166 .483 .537 1.651 .891 .961 All dimensions for reference only. 50 1 FPT jam nut receptacle (minimum penetration) L MAX. 3 LOCKWIRE HOLES .059 DIA. MIN. PANEL THICKNESS .062 -.572 S 2 PLACES N H HEX Z MIN. Y THREAD A* 21-20X4XX-XXX 21-31X4XX-XXX M L1 MAX 3 LOCKWIRE HOLES .059 DIA. MIN. PANEL THICKNESS .062 -1.188 T* C N Y THREAD Z MIN. 21-33X4XX-XXX M1 * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FPT receptacles: .438 min. SHORT SHELL VHF/UHF/MF Filters A* Flat Shell +.000 Size -.010 C Dia. +.011 -.010 H Hex +.017 -.016 M +.016 -.015 M1 +.016 -.015 N Dia +.001 -.005 S +.011 -.010 T* Dia. +.010 -.000 Y Thread UNEF-2A (Plated) L Max. LONG SHELL HF Filters Size 20 Contact Size 16 or 16 & 20 Contacts Z Max. Z Max. L Max. 1 Size 20 Contact Size 16 or 16 & 20 Contacts Z Max. Z Max. 8 .542 1.062 .750 1.235 1.690 .473 .938 .572 .5625-24 1.366 .022 .029 1.821 .070 .000 10 .669 1.188 .875 1.235 1.690 .590 1.062 .697 .6875-24 1.366 .022 .029 1.821 .070 .000 12 .830 1.375 1.062 1.235 1.690 .750 1.250 .884 .8750-20 1.366 .022 .029 1.821 .070 .000 14 .955 1.500 1.188 1.235 1.690 .875 1.375 1.009 1.0000-20 1.366 .022 .029 1.821 .070 .000 16 1.084 1.625 1.312 1.235 1.690 1.000 1.500 1.134 1.1250-18 1.366 .022 .029 1.821 .070 .000 18 1.208 1.750 1.438 1.235 1.690 1.125 1.625 1.259 1.2500-18 1.366 .022 .029 1.821 .070 .000 20 1.333 1.938 1.562 1.266 1.721 1.250 1.812 1.384 1.3750-18 1.428 .062 .029 1.883 .070 .000 22 1.459 2.062 1.688 1.266 1.721 1.375 1.938 1.509 1.5000-18 1.428 .062 .029 1.883 .070 .000 24 1.575 2.188 1.812 1.266 1.721 1.500 2.062 1.634 1.6250-18 1.428 .062 .029 1.883 .070 .000 All dimensions for reference only. 51 FPTE wall mounting receptacle S P* Z MAX. R S R N T DIA. 4 HOLES .005 M J M L MAX. 21-22X0XX-XXX For ordering information, see how to order page 72. Plug movement required to clear FPT receptacles: .438 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF/MF Filters Shell Size J +.021 -.010 M +.010 -.000 N Dia +.001 -.005 8 .493 .431 .473 .087 .594 .812 .120 1.409 10 .493 .431 .590 .087 .719 .938 .120 1.409 .774 12 .493 .431 .750 .087 .812 1.031 .120 1.409 .774 14 .493 .431 .875 .087 .906 1.125 .120 1.409 .774 16 .493 .431 1.000 .087 .969 1.219 .120 1.409 .774 18 .493 .431 1.125 .087 1.062 1.312 .120 1.409 .774 20 .650 .556 1.250 .212 1.156 1.438 .120 1.553 .679 22 .650 .556 1.375 .212 1.250 1.562 .120 1.553 .679 24 .683 .589 1.500 .212 1.375 1.688 .147 1.553 .646 P* Max. R (TP) S +.011 -.010 T Dia. .005 L Max. All dimensions for reference only. 52 Size 20 Contact Z Max. .774 FPTE jam nut receptacle S 2 PLACES P H HEX 3 LOCKWIRE HOLES .059 DIA. MIN. Z MAX. N A* R THREAD T* M C J L MAX. 21-22X7XX-XXX * "D" shaped mounting hole dimensions For ordering information, see how to order page 72. Plug movement required to clear FPT receptacles: .438 min. Shell Size A* Flat +.000 -.010 C Dia. +.011 -.010 H Hex +.017 -.016 J +.006 -.005 M .005 N Dia. +.001 -.005 8 .542 1.062 .750 .821 .696 10 .669 1.188 .875 .821 12 .830 1.375 1.062 14 .955 1.500 1.188 16 1.084 1.625 18 1.208 1.750 20 1.333 22 24 P Panel Thickness SHORT SHELL VHF/UHF Filters S .010 T* Dia. +.010 -.000 L Max. Max. Min. R Thread UNEF-2A (Plated) .473 .125 .062 .5625-24 .938 .572 1.546 .566 .696 .590 .125 .062 .6875-24 1.062 .697 1.546 .566 .821 .696 .750 .125 .062 .8750-20 1.250 .884 1.546 .566 .821 .696 .875 .125 .062 1.0000-20 1.375 1.009 1.546 .566 1.312 .821 .696 1.000 .125 .062 1.1250-18 1.500 1.134 1.546 .566 1.438 .821 .696 1.125 .125 .062 1.2500-18 1.625 1.259 1.546 .566 1.938 1.562 1.040 .884 1.250 .250 .062 1.3750-18 1.812 1.384 1.672 .440 1.459 2.062 1.688 1.040 .884 1.375 .250 .062 1.5000-18 1.938 1.509 1.672 .440 1.575 2.188 1.812 1.073 .917 1.500 .250 .062 1.6250-18 2.062 1.634 1.672 .407 All dimensions for reference only. 53 Size 20 Contact Z Max. Amphenol FAN Connectors filtered "AN" The "AN"Filter Connector is designed in configurations intermateable and intermountable with MIL-DTL-5015* connectors and provides electromagnetic interference protection for critical circuits. * Same dimensions as the non-filtered standard MIL-spec connectors with the exception of back shell length. (See Catalog 12-020). * Uses non-removable solder cup terminated contacts. * Shells are impact extruded or machined bar stock aluminum and are available in several conductive platings. * Applications include power transmission, medical communications, and ground support equipment. The following insert arrangements within the 5015 family have the same alternate insert rotations for W, X, Y and Z, which are: 250 280 22-29 22-33 22-34 24-1 24-3 24-4 24-5 24-6 24-7 24-12 24-14 24-16 24-17 24-20 24-21 24-28 28-1 28-4 28-8 28-9 28-10 28-11 28-14 28-15 28-16 28-17 28-19 28-20 28-21 32-1 32-3 32-4 32-6 32-9 32-10 32-12 32-13 32-22 32-AF 36-1 36-7 36-8 36-13 40-AR 40-AS 40-AT 40-AU The following are additional 5015 insert arrangements with alternate rotations. Insert Arrangement 10SL-4 12S-3 14S-2 14S-5 14S-7 14S-9 16-9 16-10 16-11 16-13 16S-1 16S-4 16S-5 16S-6 16S-8 18-1 18-3 18-4 18-8 18-10 18-11 18-12 18-15 18-20 18-22 18-29 20-3 W 63 70 - - 90 70 35 90 35 35 80 35 70 90 - 70 35 35 70 - - 80 - 90 70 90 70 Degrees X Y - - 145 215 120 240 110 - 180 270 145 215 110 250 180 270 110 250 110 250 - - 110 250 145 215 180 270 170 265 145 215 110 250 110 250 - - 120 240 170 265 - - 120 240 180 270 145 215 180 270 145 215 Z - 290 - - - 290 325 - 325 325 280 325 290 - - 290 325 325 290 - - 280 - - 290 - 290 * MIL-DTL-5015 supersedes MIL-C-5015. B 20-22 22-6 22-12 22-14 22-15 22-16 22-17 22-18 22-19 22-21 22-24 22-25 B 16-7 18-5 18-9 18-13 18-14 20-7 20-8 20-9 20-12 20-14 20-16 20-20 Master Keyway B 110 Master Keyway POSITION W POSITION X A 80 Master Keyway A Z A Y A X B Master Keyway Degrees W POSITION Y POSITION Z Views looking into front face of pin insert or rear of socket insert. Insert Arrangement 20-4 20-5 20-6 20-15 20-17 20-18 20-19 20-21 20-23 20-24 20-27 20-29 22-1 22-2 22-4 22-5 22-8 22-9 22-10 22-11 22-13 22-20 22-22 22-23 22-27 22-28 22-63 24-2 24-9 24-10 24-11 24-22 24-27 28-2 28-3 W 45 35 70 80 90 35 90 35 35 35 35 80 35 70 35 35 35 70 35 35 35 35 - 35 80 80 20 80 35 80 35 45 80 35 70 54 Degrees X Y 110 250 110 250 145 215 - - 180 270 110 250 180 270 110 250 110 250 110 250 110 250 - - 110 250 145 215 110 250 110 250 110 250 145 215 110 250 110 250 110 250 110 250 110 250 - 250 - 250 - - - - - - 110 250 - - 110 250 110 250 - - 110 250 145 215 Z - 325 290 280 - 325 - 325 325 325 325 280 325 290 325 325 325 290 325 325 325 325 - - 280 280 - 280 325 280 325 - 280 325 290 Insert Arrangement 28-5 28-6 28-7 28-12 28-18 28-22 28-AY 32-2 32-5 32-7 32-8 32-15 32-17 32-25 32-48 32-64 32-68 32-82 36-3 36-4 36-5 36-6 36-9 36-10 36-14 36-15 36-AF 40-1 40-5 40-9 40-10 40-35 40-AD 40-AG 40-AP 40-AV W 35 70 35 90 70 70 45 70 35 80 80 35 45 60 80 80 30 30 70 70 - 35 80 80 90 60 65 65 33 65 65 70 45 37 35 90 Degrees X Y 110 250 145 215 110 250 180 270 145 215 145 215 110 250 145 215 110 250 125 235 125 235 110 250 110 250 120 - - - 100 110 - - - - 145 215 145 215 120 240 110 250 125 235 125 235 180 270 125 245 - - 130 235 - - 125 225 125 225 130 230 - - 74 285 110 250 180 270 Z 325 290 325 - 290 290 - 290 325 280 280 280 - - - 250 - - 290 290 - 325 280 280 - 305 - 300 270 310 310 290 - 322 325 - FAN (MIL-DTL-5015) box mounting receptacle 2.000 MAX. S K R S M R N T DIA. 4 HOLES B THREAD .005 M 21-26X2XX-XXX For ordering information, see how to order page 72. Note: MIL-DTL-5015 supersedes MIL-C-5015. Shell Size B Thread Class 2A (Plated) M +.010 -.000 K +.020 -.010 N Dia. +.010 -.000 R TP S .031 T Dia. +.004 -.002 8S .5000-28 UNEF .562 .672 .375 .594 .875 .120 10S .6250-24 UNEF .562 .672 .500 .719 1.000 .120 10SL .6250-24 UNEF .562 .672 .625 .719 1.000 .120 12S .7500-20 UNEF .562 .672 .625 .812 1.094 .120 12 .7500-20 UNEF .750 .860 .625 .812 1.094 .120 14S .8750-20 UNEF .562 .672 .750 .906 1.188 .120 14 .8750-20 UNEF .750 .860 .750 .906 1.188 .120 16S 1.0000-20 UNEF .562 .672 .875 .969 1.281 .120 16 1.0000-20 UNEF .750 .860 .875 .969 1.281 .120 18 1.1250-18 UNEF .750 .891 1.000 1.062 1.375 .120 20 1.2500-18 NEF .750 .891 1.125 1.156 1.500 .120 22 1.3750-18 NEF .750 .891 1.250 1.250 1.625 .120 24 1.5000-18 NEF .812 .953 1.375 1.375 1.750 .147 28 1.7500-18 NS .812 .953 1.625 1.562 2.000 .147 32 2.0000-18 NS .875 1.031 1.875 1.750 2.250 .173 36 2.2500-16 UN .875 1.031 2.062 1.983 2.500 .173 40 2.5000-16 UN .875 1.031 2.312 2.188 2.750 .173 All dimensions for reference only. 55 Amphenol (R) EMI/RFI Connectors Programmable Amphenol(R) Programmable Filter Connectors combine the versatility of standard crimp connectors with EMI/RFI protection for sensitive circuitry. * Designed to filter and protect circuits from power surges, and will replace bulky filter networks that occupy critical space in electronic boxes. * Ground, insulated or filter contacts can be combined within the same connector to accommodate unique and changing EMI requirements. * Provides benefits not available in fixed EMI/RFI connectors. * Crimp style EMI contacts are insertable and removable from the rear of the connector, making modification of EMI performance as simple as changing a contact. * Connectors are repaired by replacing the damaged contact using a standard M81969 insertion and removal tool. The table below indicates crimp frames and positioners to be used. Contact Part No. Contact Size Turret** Crimp Frame** PFXXXXCR-22DP 22D Pin K932 M22520/2-01 PFXXXXCR-22DS 22D Socket K931 M22520/2-01 PFXXXXCR-20P 20 Pin TH533 M22520/1-01 PFXXXXCR-20S 20 Socket TH533 M22520/1-01 PFXXXXCR-16P 16 Pin TH533 M22520/1-01 PFXXXXCR-16S 16 Socket TH533 M22520/1-01 The following pages provide how to order instructions and dimensional information particular to the Programmable Filter Connector. If more information is required, contact Amphenol, Sidney, NY. See L-624-3 for additional crimping, insertion and removal instructions ** Available from Daniels Mfg. Co., Inc., Orlando, FL * * Crimp contacts or contacts for printed circuit board applications are offered in a wide range of capacitance values. Pi filters are available in the VHF and UHF frequency ranges. Programmable EMI/RFI connectors are intermateable and intermountable with MIL-DTL-38999 Series I, II, III, and SJT. See publication L-2057 for a complete list of attenuation values at specific capacitance ranges. 56 PFLJT Programmable wall mounting receptacle, box mounting receptacle, jam nut receptacle C R SS +.006 1.620 -.005 BLUE BAND*** WALL MOUNT RECEPTACLE PFLJTPQ00* C N R V THREAD CLASS 2A T DIA. 4 HOLES .005 M E .908 +.002 -.003 C R SS 1.620 +.006 -.005 BLUE BAND*** BOX MOUNT RECEPTACLE PFLJTP02* C N R T DIA. 4 HOLES .005 M E .908 S P SS +.002 -.003 1.620 +.006 -.005 BLUE BAND*** MASTER KEYWAY JAM NUT RECEPTACLE PFLJT07* .219 MIN. FULL THREAD S BB .063 N RR THREAD CLASS 2A +.005 4 KEYWAYS -.001 M V THREAD CLASS 2A .062 -.125 PANEL THICKNESS A * To complete order number, see Programmable Filter how to order on page 60. *** Blue band indicates rear release contact retention system. Shell Size A +.011 -.010 C +.011 -.010 E +.000 -.006 M .005 N Dia. +.001 -.005 P Hex +.017 -.016 R S +.016 -.015 T Dia. +.004 -.003 V Thread BB Flat +.000 -.010 RR Thread (Plated) SS Dia. +.000 -.016 11 .109 1.031 .820 .915 .700 1.000 .812 1.250 .128 .5625-24UNEF .755 .8125-20UNEF .810 13 .109 1.125 .820 .915 .850 1.188 .906 1.375 .128 .6875-24UNEF .942 1.0000-20UNEF .960 15 .109 1.219 .820 .915 .975 1.312 .969 1.500 .128 .8125-20UNEF 1.066 1.1250-18UNEF 1.085 17 .109 1.312 .820 .915 1.100 1.438 1.062 1.625 .128 .9375-20UNEF 1.191 1.2500-18UNEF 1.210 19 .140 1.438 .820 .915 1.207 1.562 1.156 1.812 .128 1.0625-18UNEF 1.316 1.3750-18UNEF 1.317 21 .140 1.562 .790 .915 1.332 1.688 1.250 1.938 .128 1.1875-18UNEF 1.441 1.5000-18UNEF 1.442 23 .140 1.688 .790 .915 1.457 1.812 1.375 2.062 .147 1.3125-18UNEF 1.566 1.6250-18UNEF 1.567 25 .140 1.812 .790 .915 1.582 2.000 1.500 2.188 .147 1.4375-18UNEF 1.691 1.7500-18UNS 1.692 All dimensions for reference only. Designates true position dimensions. The LJT is a MIL-DTL-38999, Series I connector. See catalog 12-090 for additional design specifications. The Programmable Filter LJT is intermateable and intermountable with BS952090001 and HE308. 57 PFTV Programmable wall mounting receptacle, jam nut receptacle C WALL MOUNT RECEPTACLE PFTVP00* MASTER KEYWAY R1 1.631+.006 -.005 R2 BLUE BAND*** RED BAND** C R1 R2 T 4 PLACES TT 4 PLACES E .908 .003 .005 M S P D JAM NUT RECEPTACLE PFTV07* V THREAD METRIC B THREAD CLASS 2A .01P-0.3L-TS 1.631 +.006 -.005 RED BAND** MASTER KEYWAY BLUE BAND*** .280 MIN FULL THREAD S RR THREAD METRIC B THREAD CLASS 2A .1P-0.3L-TS M V THREAD METRIC .062 MIN. -.125 MAX. PANEL THICKNESS A * To complete order number, see Programmable Filter how to order on page 60. ** Red band indicates fully mated. *** Blue band indicates rear release contact retention system. Shell Size B Thread (Plated) C .010 D Dia +.005 -.001 E +.000 -.005 M .005 P Hex +.017 -.016 R1 R2 S .010 T +.008 -.006 V Thread Metric (Plated) RR Thread Metric (Plated) TT +.008 -.006 11 .7500 1.031 .570 .820 .871 1.000 .812 .719 1.250 .128 M15X1-6g M20X1-6g .194 13 .8750 1.125 .682 .820 .878 1.188 .906 .812 1.375 .128 M18X1-6g M25X1-6g .194 15 1.1000 1.219 .807 .820 .878 1.312 .969 .906 1.500 .128 M22X1-6g M28X1-6g .173 17 1.1875 1.312 .932 .820 .878 1.438 1.062 .969 1.625 .128 M25X1-6g M32X1-6g .194 19 1.2500 1.438 1.037 .820 .878 1.562 1.156 1.062 1.812 .128 M28X1-6g M35X1-6g .194 21 1.3750 1.562 1.162 .790 .878 1.688 1.250 1.156 1.938 .128 M31X1-6g M38X1-6g .194 23 1.5000 1.688 1.287 .790 .878 1.812 1.375 1.250 2.062 .154 M34X1-6g M41X1-6g .242 25 1.6250 1.812 1.412 .790 .878 2.000 1.500 1.375 2.188 .154 M37X1-6g M44X1-6g .242 All dimensions for reference only. Designates true position dimensions. The TV is a MIL-DTL-38999, Series III connector. See catalog 12-092 for additional design specifications. The Programmable Filter TV is intermateable and intermountable with BS952090003 and JN1034. 58 PFSJT Programmable wall mounting receptacle, box mounting receptacle, jam nut receptacle C R 1.620+.006 -.005 SS WALL MOUNT RECEPTACLE PFSJTPQ00* C R BLUE BAND*** N V THREAD CLASS 2A T 4 HOLES .005 M E .908+.002 -.003 C R 1.620 +.006 -.005 SS BLUE BAND*** BOX MOUNT RECEPTACLE PFSJTP02* C N R T 4 HOLES .005 M E .908 +.002 -.003 S P SS 1.620 MASTER KEYWAY +.006 -.005 BLUE BAND*** .219 MIN. FULL THREAD JAM NUT RECEPTACLE PFSJT07* BB S N RR THREAD CLASS 2A .063 +.005 4 KEYWAYS -.001 M V THREAD CLASS 2A .062 -.125 PANEL THICKNESS A * To complete order number, see Programmable Filter how to order on page 60. *** Blue band indicates rear release contact retention system. Shell Size A +.011 -.010 C +.011 -.010 E +.000 -.006 M .005 N Dia. +.001 -.005 10 12 14 P Hex +.017 -.016 R S +.016 -.015 T Dia. +.004 -.003 V Thread BB Flat +.000 -.010 .109 .938 .820 .915 .109 1.031 .820 .915 .590 .875 .719 1.062 .120 .5625-24UNEF .669 .6875-24UNEF .750 1.062 .812 1.250 .120 .6875-24UNEF .830 .8750-20UNEF .109 1.125 .820 .915 .859 .875 1.188 .906 1.375 .120 .8125-20UNEF .955 1.0000-20UNEF .984 RR Thread (Plated) SS Dia. +.000 -.016 .680 16 .109 1.219 .820 .915 1.000 1.312 .969 1.500 .120 .9375-20UNEF 1.084 1.1250-18UNEF 1.108 18 .140 1.312 .820 .915 1.125 1.438 1.062 1.625 .120 1.0625-18UNEF 1.208 1.2500-18UNEF 1.233 20 .140 1.438 .790 .915 1.250 1.562 1.156 1.812 .120 1.1875-18UNEF 1.333 1.3750-18UNEF 1.358 22 .140 1.562 .790 .915 1.375 1.688 1.250 1.938 .120 1.3125-18UNEF 1.459 1.5000-18UNEF 1.483 24 .140 1.688 .790 .915 1.500 1.812 1.375 2.062 .147 1.4375-18UNEF 1.580 1.6250-18UNS 1.610 All dimensions for reference only. Designates true position dimensions. The SJT is a proprietary connector. See catalog 12-091 for additional design specifications. The Programmable Filter SJT complies with VG96912 for intermating and intermounting. 59 Programmable EMI/RFI how to order Programmable Filter Connector part number breakdown, less contacts for connector LJT, SJT and TV types: PF LJT 1 2 P02RT 25 - 35 P A 4 6 7 3 5 Programmable Filter Contacts*** Part Number Breakdown: (XXX) (B) 8 9 PF 49 2 1 CR 22D P 1 2 3 4 5 6 7 1. PF designates Programmable Filter 1. PF designates Programmable Filter 2. Connector Series*: LJT TV (Tri-Start) SJT JT (for availability, consult Amphenol, Sidney, NY) 2. Significant figures of capacitance (in PF) for example: 4900 = 49 3. Multiplier (No. of zeros) 4. Filter Circuit: 1 = Pi Filler 8 = Ground 9 = Feed-thru 3. Shell Style, Service Class and Finish: LJT/SJT (style & class only, finish designated by variation suffix): P02RT (box mount) PQ00RT (wall mount) 07RT (jam nut) TV: 5. Termination Style: CR designates Crimp PR designates Printed Circuit Tail 6. Contact Size: 16, 20, 22D P00RF (wall mount electroless nickel) P00RW (wall mount O.D. cadmium) 07RF (jam nut electroless nickel) 07RW (jam nut O.D. cadmium) 7. Contact Gender: Pin or Socket 8. Contact Variation Suffix 4. Shell Size: LJT/TV: 9 through 25 SJT: 8 through 24 9. "B" or "W" - indicates source of origin** 5. Insert Pattern - refer to insert availability chart on page 9 Capacitor Color Coding 6. Insert Gender: Pin or Socket Filter Type 7. Alternate Shell Position: LJT/SJT: A through D TV: A through E 8. Variation Suffix Finish designation for LJT/SJT: (023) electroless nickel (014) O.D. cadmium Color UHF1 Violet UHF2 Pink VHF1 Green VHF2 Brown 9. "B" or "W" - indicates source of origin** * Connector Series: LJT is a MIL-DTL-38999, Series I connector. See catalog 12-090 for additional design specifications. TV (Tri-Start) is a MIL-DTL-38999, Series III connector. See catalog 12-092 for additional design specifications. SJT is a proprietary connector. See catalog 12-091 for additional design specifications. JT is a MIL-DTL-38999, Series II connector. See catalog 12-090 for additional design specifications. ** B designates Amphenol (R) from Amphenol, Sidney, N.Y., U.S.A. W designates Amphenol Limited, Whitstable, England *** Contact Amphenol for availability 60 (XXX) (B) 8 9 Amphenol(R) Filter Adapters effective circuit protection for existing applications Filter adapters present an effective and economical method of introducing EMI/EMP protection to an installed system. The adapter series of filter connectors from Amphenol are available to intermate with all the popular MIL-Specs. Features of the Amphenol (R) adapter include: * Planar technology from the industry's leader in cylindrical filter products * MOV or diode capability for transient protection * Wide range of tooled patterns * Space qualified components Installation of the adapter is quick and efficient, requiring no tools, fixtures or extended downtime. Simply unmate the existing cable harness from the receptacle; attach the coupling nut to the receptacle on the unit; then mate the cable harness to the receptacle side of the adapter. Several design alternatives are available that will help ensure that the adapter remains permanently attached to either the cable harness or the unit receptacle. 61 FPT, FJT, FLJT, FTV adapters FPT Adapter 21-900075-XX L N C FJT Adapter 21-900393-XX L C N FLJT Adapter 21-900423-XX L N C FTV Adapter 21-900529-XX L C V Thread FPT Shell Size C Dia. Ref. N Dia. +.001 -.005 L Max. 1.626 8 .729 .473 10 .851 .590 1.626 12 1.035 .750 1.626 14 1.158 .875 1.626 16 1.280 1.000 1.626 18 1.403 1.125 1.626 20 1.525 1.250 1.688 22 1.648 1.375 1.688 24 1.770 1.500 1.688 FJT Shell Size C Dia. +.011 -.010 N Dia. +.001 -.005 L Max. 1.397 8 .847 .473 10 .969 .590 1.397 12 1.143 .750 1.397 14 1.255 .875 1.397 16 1.388 1.000 1.397 18 1.510 1.125 1.397 20 1.633 1.250 1.397 22 1.756 1.375 1.397 24 1.878 1.500 1.397 FLJT Shell Size C Dia. +.011 -.010 N Dia. +.001 -.005 L Max. 9 .920 .572 2.038 11 1.045 .700 2.038 13 1.246 .850 2.038 15 1.371 .975 2.038 17 1.496 1.100 2.038 19 1.616 1.207 2.038 21 1.743 1.332 2.038 23 1.866 1.457 2.038 25 1.991 1.582 2.038 FTV Shell Size C Dia. Ref. V Thread 0.1P-0.3L-TS Class 2A L Max. 2.257 9 .845 .6250 11 .950 .7500 2.257 13 1.121 .8750 2.257 15 1.249 1.0000 2.257 17 1.386 1.1875 2.257 19 1.493 1.2500 2.257 21 1.620 1.3750 2.257 23 1.737 1.5000 2.257 25 1.864 1.6250 2.257 All dimensions for reference only. Consult Amphenol, Sidney, NY for ordering information. 62 Amphenol (R) Transient Protection MOV - Metal Oxide Varistor Connectors * Filter connector size package * Protection for 14, 31, 38 DC voltage circuits * Radiation hardened * No additional circuits required * Low impedance * Increased reliability * Nanosecond response time * Elimination of costly external suppression assemblies The Amphenol (R) MOV Connector offers the versatility of a standard connector, with transient protection for sensitive circuits. Transients in electrical circuits caused by a sudden release of stored energy can originate within or outside of the circuit and may be repeatable or random. Regardless of frequency or origin, transient caused failures generated by load switching, lightning, electrostatic discharge (ESD) and electromagnetic pulse (EMP) can destroy unprotected IC components. Compatible with present filter connector assembly procedures, MOVs can be combined with existing filters. Internal housing of the MOV sleeve offers weight and space savings over other protection methods available today, and eliminates costly and bulky exterior suppression mechanisms in appropriate situations. MOVs are presently available in contact sizes 22, 20 and 16. Transient protection can be provided in receptacle, plug or adapter configuration. These connectors are intermateable and intermountable with the following MIL-Specs: * MIL-DTL-5015 * MIL-C-27599 * MIL-C-26482 * MIL-DTL-38999 * MIL-C-26500 * MIL-C-83723 63 MOV Connectors, cont. M.O.V. PERFORMANCE CHARACTERISTICS Maximum Ratings (125C) Continuous Specifications (25C) Transient DC RMS Energy Voltage Voltage (10/1000S) Maximum Clamping Voltage Vc at Test Current lp (8/20S) Varistor Voltage at 1mA (DC) Peak Current (8/20S) Maximum Leakage Current at Vt (dc) Capacitance at 1 MHz Vt Ip Amps 25C 125C Min. Max. A A 42 10 1000 3000 5 50 14 85 5 450 1950 5 50 28 58 100 5 400 1500 5 50 36 39 48 85 10 450 1950 5 50 28 42 47 58 100 10 400 1500 5 50 36 42 47 58 100 20 450 1950 5 50 36 Designation Contact Size Vm Volts Vm Volts Wtm Joules Itm Min. VN (dc) Max. Amperes Volts Volts Volts F14 22 14 10 1.5 250 18 22 26 F31 22 31 25 1.5 250 35 39 48 F38 22 38 30 1.5 250 42 47 F31 20 31 25 2 300 35 F38 20 38 30 2 300 F38 16 38 30 3 350 VC Volts Picofarads IL Max. IL Max. DC Volts NOTE: Continuous voltage ratings are based on 1000 hour reliability assurance tests at 125 C rated ambient temperature per MIL-STD-202 Method 108. Contact Amphenol Sidney for options not listed in chart. 30V 10 25 6 4 2 0 -2 1200 INPUT 900 20 15 INPUT CURRENT 8 The following chart shows response time and output voltage of a typical MOV with 1000V, 5 nanosecond, 2.5A input pulse mounted in an LJT 13-35P connector. Test was performed without load. 10 5 0 OUTPUT 600 20 15 300 10 5 -5 0 DATA Base Peak 40 80 120 160 NANOSECONDS .1767 9.65 200 A A 25 0 DATA Base Peak 40 80 120 160 NANOSECONDS -.094 29.086 200 0 V V 64 DATA Peak Input 50 100 150 200 250 300 NANOSECONDS 24V (Clamping) 2.5A OUTPUT VOLTAGE 12A OUTPUT VOLTAGE INPUT CURRENT The following charts show the typical MOV response to an input pulse open circuit of 1000V and 10A peak square wave with a 5 nanosecond rise time in a 50 Ohm system. Amphenol (R) Transient Protection Diode Connectors * Clamping voltage as low as 11.9 volts * Low capacitance - suitable for high frequency applications * Unipolar or bipolar - using existing proven diode technology * Protection for 5.8 to 60 VDC circuits * No additional circuits required * Low impedance - high frequency response * Increased reliability * Nanosecond response time * Elimination of costly external suppression assemblies * Screening to applicable requirements of MIL-S-19500TX/ TXV available * Keeps transients outside of the box * Minimizes fast transient voltage overshoot The Amphenol (R) Diode Connector offers the versatility of a standard connector, with transient protection for sensitive circuits, such as TTL Lines. Diode Connector and Adapter Transients in electrical circuits caused by a sudden release of stored energy can originate within or outside of the circuit and may be repeatable or random. Regardless of frequency or origin, transient caused failures generated by load switching, lightning, electrostatic discharge (ESD) and electromagnetic pulse (EMP) can destroy unprotected IC components. Compatible with present filter connector assembly procedures, diodes can stand alone or can be combined in series with filters. Internal housing of the diode offers weight and space savings over other protection methods available today, and eliminates costly and bulky exterior suppression mechanisms in appropriate situations. Diodes are presently available in contact sizes 22 and 20. Close-up View of Diode Contact Transient protection can be provided in receptacle, plug or adapter configurations. These connectors are intermateable and intermountable with the following MIL-Specs: * * * MIL-DTL-5015 MIL-C-26482 MIL-C-26500 * * * MIL-DTL-27599 MIL-DTL-38999 MIL-C-83723 65 Diode Connectors, cont. STANDARD DIODE CONNECTOR CHARACTERISTICS AT 25 C Stand-off Voltage (VDC) Max. Capacitance* (pf) Max. Clamping Voltage (8 x 20 sec. pulse) Leakage Current at Stand-off Voltage (A) Power Capability 20s Exp. Impulse (Peak) (Watts) + 5.8 1600 5.8 1000 + 6.45 to + 7.1** +11.9 <100 1000 6.45 to 7.1** 11.9 <150 7.0 1000 750 7.3 to 9.3 13.5 <10 1000 8.0 750 8.2 to 10.6 15.4 <5 1000 + 8.0 1500 + 8.5 to +10.6 +15.4 <5 1000 10.0 500 11.1 to 12.3 17.0 <1 1000 +10.0 1100 +11.1 to +12.3 +17.0 <1 1000 15.0 500 16.7 to 18.5 24.9 <1 1000 +15.0 750 +16.2 to +19.2 +24.9 <1 1000 -15.0 750 -16.2 to -19.2 -24.9 <1 1000 17.0 500 18.9 to 23.0 32.0 <1 1000 +17.1 600 +19.0 to +21.0 +27.7 <1 1000 22.0 500 25.7 to 28.4 38.0 <1 1000 25.0 500 27.8 to 30.7 40.5 <1 1000 +28.0 500 +30.5 to +35.7 +46.4 <1 1000 33.3 500 +37.1 to +41.0 53.9 <1 1000 +33.3 500 +37.1 to +41.0 +53.9 <1 1000 40.0 500 44.4 to 49.1 64.5 <1 1000 45.0 500 47.1 to 58.1 84.2 <1 1000 +57.8 500 +64.6 to +71.4 +95.2 <1 1000 57.8 500 64.6 to 71.4 95.2 <1 1000 Breakdown Voltage at 1 ma (VDC) Clamping Time Unipolar: Less than 1 nanosecond, 0V to breakdown Bipolar: Less than 5 nanoseconds, 0V to breakdown * Lower capacitance devices available; consult Amphenol, Sidney, NY. **This device only measured at 10ma Higher power ratings also available DIODE CONTACT PULSE TEST, 5.8 DIODE 66 Amphenol (R) Transient Protection ESA - Energy Shunting Assembly The Amphenol (R) Energy Shunting Assembly (ESA) is a simple, compact unit which provides lightning and electromagnetic pulse (EMP) protection of systems in which many signal lines enter sensitive electronic equipment. The efficient packaging of the ESA circumvents the concept of one protective device per line. It provides a surge arrestor which has the advantage of space saving and simplified assembly when compared to current protective devices which range from diodes to large spark gaps. The current ESA design consists of two 53-pin contact, Mil-Standard, hermetic connectors assembled back to back, and encompassing a ground plate. A sealed chamber is formed within this thru-bulkhead unit, housing 53 in-line spark gaps. Introducing a controlled atmosphere enhances fast rise breakdown. The ESA can be integrated with an EMI filter connector which can improve its performance. These two assemblies provide a method to help protect against lightning, EMP, EMI and TEMPEST effects. Performance Characteristics 1. DC breakdown voltage 230 Volts 2. Maximum rated surge discharge current (8 x 20 microsecond pulse) 3. Insulation resistance 1010 ohms minimum 4. Capacitance between each electrode and the ground plane 5. Rate-of-rise breakdown voltage 5,000 Amperes per pin Less than 2 pf Maximum Breakdown Voltage (Volts) Rate of Rise (Volts/microsecond) 600 800 1,500 2,000 10 1,000 10,000 1000,000 6. Surge breakdown unbalance (at 100 Volts/microseconds) 7. Surge life (500 Ampere - 10 x 1,000 microsecond) 180 Volts 400 Surges 8. Hold-over voltage 100 Volts 9. Arcing voltage 40 Volts 10. Glow to arc transition point 1 Ampere 11. Temperature range -40F to 150F (233K to 339K) 67 Filter Accessories Universal "Header Assembly" for flex print or PC board connectors Mounts to all MIL-DTL-38999 and MIL-C-26482 Connectors The use of connectors with printed circuit termination is rapidly gaining popularity due to the use of high volume, vapor phase or wave solder manufacturing processes. Termination of this style of connector to flex print or a printed circuit board represents a major cost in the manufacturing process for users. When adding flex or printed circuit board assemblies to an expensive filter or filter/transient protection connector, the total cost of a failed solder joint, a bent pin, or an unanticipated electrical failure becomes prohibitive. The universal header assembly from Amphenol will provide for easy separation of the connector from the board on these occasions. Headers provide easy separation of the connector from the PC board. Header Assemblies Provide Cost Savings Incorporation of the header assembly provides the user with time and cost saving potentials. These header assemblies can be vapor phase or wave soldered to flex or printed circuit boards prior to the receipt of the EMI/EMP connector. Headers can be installed to standard connectors, allowing for electrical testing that would adversely affect the sensitive diodes, MOV's or capacitors in the EMI/EMP connectors. Expensive connector assemblies can be easily removed from and reattached to the header assembly as the manufacturing process dictates. Cylindrical Configuration * 3 PCB stickout dimensions are available. * Size 22D contacts use .175 thick headers * Size 16 to 20 contacts use .195 thick headers * Consult Amphenol, Sidney NY for additional configurations. * Headers for cylindrical connectors accommodate up to 128 pins. Consult Amphenol catalogs for mating connector contact layouts (12-092 and 12-090 for MIL-DTL-38999 and 12-070 for MIL-C-26482). Mounting Applications Shell modifications are recommended, but are not necessary. The header assembly can be attached to connectors with standard flange placement or directly to the circuit board. The ideal application would involve either a single flange moved all the way to the rear of the connector or a double flange. Cinch nuts can be installed in either flange to allow easier mounting to the panel or the header assembly. The forward flange would mount the connector to the panel; the rear flange would be used to mount the header assembly. Various types of captivated or loose attaching screws can be utilized for unique applications. Mounting to Rectangular ARINC Connectors * Headers for ARINC connector arrangements accommodate up to 150 pins. * Consult Amphenol, Sidney NY for ARINC configurations and detailed dimensions. Materials * Body is molded from Torlon or PPS (Polyphenylene Sulfide) * Electrical engagement areas of the header contact are plated with .00003 inches minimum of gold over .00005 inches minimum of nickel. Amphenol universal headers are slotted to allow mounting to all series of MIL-DTL-38999 or MIL-C-26482 connectors without special alterations. They are of similar dimension as the flange of the mounting connector and would be approximately .185 inches (4.70 mm) thick. Incorporates a Shorter Pin/Socket Contact The heart of the header assembly is a short pin/socket contact. The tall of the contact would accommodate standard throughhole diameter and thickness of the flex or printed circuit board materials. The socket is imbedded in the molded material, making electrical engagement with the printed circuit tail of the connector. 68 Filter Accessories Universal "Header Assembly" for flex print or PC board connectors, cont. The drawing below shows the standard universal adapter for use with MIL-DTL-38999 and MIL-C-26482 connectors. Consult Amphenol, Sidney, NY for drawings of headers for ARINC configurations. S R1 VISUAL INDICATOR NOTCH FOR TOP CL OF INSERT PATTERN (SIZE & CONFIGURATION OPTIONAL) R2 T G SIZE 22 CONTACT VIEW .020 .001 TT F RADIUS Assembly Part Number 21-904008-XX( ) 21-904010-XX( ) 21-904012-XX( ) 21-904014-XX( ) 21-904016-XX( ) 21-904018-XX( ) 21-904020-XX( ) 21-904022-XX( ) 21-904024-XX( ) Shell Size 8/9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 F Radius G .005 .094 .094 .094 .125 .125 .125 .125 .125 .125 See Suffix Chart TP designates true position dimensioning. S .005 T +.008 -.006 R1 TP R2 TP TT +.008 -.006 .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 1.812 .128 .128 .128 .128 .128 .128 .128 .154 .154 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 .216 .194 .194 .173 .194 .194 .194 .242 .242 Assemblies containing Size 22 contact only: .175 Assemblies containing Size 16 or 20 contacts: .195 HOW TO ORDER INFORMATION For Universal Adapter used with MIL-DTL-38999 and MIL-C-26482 Connectors XX - XX Shell Size Designation* X 08 10 12 14 16 18 20 22 24 Designates Amphenol(R) Interface Adapter Shell size designation for MIL-DTL-38999 Series I, II, III and IV or MIL-C-26482 Series 1 and 2. See suffix chart. Arrangement number - See MIL-STD-1560 or MIL-STD-1669. Also consult Amphenol catalogs 12-092 (MIL-DTL-38999 Series III), 12-090 (MIL-DTL-38999 Series I, II), and 12-070 (MIL-C-26482 Series 1) Contact PCB Stickout designation See suffix chart. * For how to order information on adapters to be used with ARINC connectors, consult Amphenol Aerospace, Sidney NY. 69 SIZE 16 AND 20 CONTACT VIEW B PCB STICKOUT (SEE SUFFIX CHART BELOW) .050 .040 .001 (SIZE 20) .0625 .0010 (SIZE 16) G NOTE: Size 22 accepts .018 to .022 dia. PCB tails. Size 16 accepts .048 to .064 dia. PCB tails. Size 20 accepts .037 to .043 dia. PCB tails. ASSEMBLY NUMBER SUFFIX CHART Use coded number as follows: 21-9040 B PCB STICKOUT (SEE SUFFIX CHART BELOW) Arrangement Number Suffix*** Insert Arrangement Suffix from MIL-STD-1560 or MIL-STD-1669 Contact PCB Stickout** Suffix B .015 Stickout 1 2 3 .120 .185 .270 Shell size designation for MIL-DTL-38999 Series I, II, III & IV and MIL-C-26482 Series 1 and 2. Examples: Shell size 9 use 08. Shell size 25 use 24. ** Size 22 contacts available in all 3 stickout lengths. Size 16 and 20 contacts available only in .185 and .270 lengths. *** Insert arrangement 14-97 and 15-97 are not available at this time. Consult Amphenol, Sidney, NY for information. Filter Accessories Amphenol Electrostatic Discharge (ESD) Protected Connectors Amphenol has developed cylindrical and rectangular connectors which protect sensitive components from Electrostatic Discharge (ESD) without diodes, varistors, gas tubes, or "experimental" semiconductive materials. These connectors utilize the Faraday Cage principal to shunt electrostatic discharge events to the conductive enclosure on which the connector is mounted, thus never allowing the high voltage, high current discharge event to reside on any contacts. The ESD protected connectors have the same physical envelope as their standard counterparts, and do not require special mounting or terminating techniques. All of the contacts remain fully functional, and electrical characteristics such as capacitance are not effected. Product Features: * Connector envelope identical to unprotected design for most applications * Exceeds Protection Requirements of IEC 801-2 and MIL-STD-1686: * Ensures that All Components within a Conductive Enclosure will be Subjected to a Maximum of 10V during Electrostatic Discharges between - 26 KV and +26 KV * Voltage Observed on Contacts during ESD Events - <10V (at 1 megohm) * Current Observed on Contacts during ESD Events - <100 milliamperes (at 2 ohms) * Response Time - Instantaneous (Voltage and Current are Maximum Values) * Maximum ESD Voltage - Tested to 26KV * No Capacitive Loading * Eliminates the Need for Discrete Components (such as diodes) and Maximizes Printed Circuit Board Real Estate for Equipment Housed in Conductive Enclosures which require ESD Protection as Free-standing Units * Operating Voltage of Connectors not Effected for Most Designs * Pulse Life - Infinite What is Electrostatic Discharge (ESD)? Electrostatic Discharge (ESD) is the rapid transfer of a static electric charge from one body to another. A static electric charge consists of either a surplus or depletion of electrons on a body, which gives that body a potential or voltage relative to ground (or another body). The discharge is extremely fast (less than 1 nanosecond risetime) and the current flow may exceed 100 amps! Static electricity is normally the result of two materials transferring charges when rubbed or separated, such as shoes scuffing across a dry carpet, or sheets of untreated plastic being separated. This phenomena is commonly referred to as the triboelectric effect. The voltage developed due to the triboelectric effect depends on the materials involved, the quantity and type of contact, and relative humidity. In a dry environment a person can accumulate a charge of up to 25 KV! In a moist environment a person's potential is reduced due to the effect of moisture on the insulating properties of materials. For further information see: Amphenol Product Data Sheet #171-1 Amphenol Electrostatis Discharge (ESD) Protected Connectors. Amphenol Publication L-2075, "ESD Attenuation Test Procedure for Connectors with Faraday Cage Protective Structures" * For further information on Amphenol LRM connectors with ESD t ti lt A h lA Sid NY 70 ESD Testing on MIL-DTL-38999, Series III Filter Cylindrical Connector (Actual Photo) What is a Faraday Cage? A Faraday cage is a conductive enclosure. It may be solid in form such as a sheet-metal enclosure, or it may be full of apertures, such as a wire cloth box. When a charge is placed on a faraday cage the electrons which make up the charge, having like polarity, try to position themselves as far as possible from each other. This places the electrons on the outer surface of the enclosure, leaving the inner surface uncharged. The charge on the outer surface does not induce a charge on any neutral object inside of the faraday cage, and therefore does not try to transfer itself onto the internal object. Neutral objects (such as IC's) inside of a faraday cage are thereby protected from ESD activity external to the faraday cage. The voltage and current observed on neutral objects within a faraday cage during ESD events are due to the secondary effects of ESD. These include Electromagnetic Interference (EMI), magnetic and electrical field coupling. The faraday cage of the Amphenol ESD Protected Connectors has been designed to minimize these effects. The Amphenol(R) ESD Protected Connectors The Amphenol(R) ESD Protected Connectors have a faraday cage at the mating interface. The faraday cage has been specifically designed to intercept electrostatic discharges from the contacts in the unmated state, while maintaining each contact's isolation when the connector is mated. When the ESD Protected Connectors have been mounted to a conductive enclosure, a faraday cage is created which will protect components located within the enclosure from electrostatic discharges. This eliminates the need for discrete components such as diodes and gas discharge tubes, and saves printed circuit board real estate. Amphenol ESD Protected Connectors have also been applied to Line Replaceable Modules (LRM).* How to Order Filter Connectors The following format is suggested when ordering Amphenol(R) EMI filter connectors: * Fill out the EMI Filter Connector check list on the next page. This check list page can be copied, filled out and sent to an Amphenol technical support person. Fax it to 607-563-5157 and a filter connector specialist will help you. It is also available on-line at www.amphenol-aerospace.com/ products_filter.html. * Choose the contact and attenuation characteristics required. (see pages 5 and 6). * Choose the contact size and insert arrangement. Refer to corresponding Mil-Spec or go to the applicable Amphenol detailed connector catalog as follows: * 12-092, MIL-DTL-38999, Series III Tri-Start Connectors * 12-090, MIL-DTL-38999, Series I & II, LJT & JT Connectors * 12-070, MIL-C-26482, Series 1 Connectors * 12-020, MIL-C-5015 Connectors These detailed catalogs are all available on-line at www.amphenol-aerospace.com. * Choose the shell style that fits your application. Refer to each of the style sections in this catalog: Filter Connector Type Filter Connector Brief Description FCTV MIL-DTL-38999 Series III with Composite shell 9-13 FTV MIL-DTL-38999 Series III with Metal shell 14-20 FJT MIL-DTL-38999, Series II 21-27 FLJT MIL-DTL-38999 Series I 28-37 FSJT Proprietary 38999 type 38-43 FBL MIL-DTL-38999 Series IV 44-46 FPT MIL-C-26482 47-53 FAN MIL-DTL-5015 54-55 Pages * To arrive at part number, see page 73, How to Order. 71 How to Order Ordering procedure for example part number 21-209216-26P is shown below. If further assistance is needed to determine your filter connector requirements and order number(s), see the EMI Filter Check List on the next page and/or consult Amphenol Aerospace, Sidney, NY. 21 - 20 9 2 16 - 26 P -2XX Filter Connector Designator Any combination of filters, non-filters, grounds, and non-standard contact terminations will require -2XX suffix. Please consult Amphenol Aerospace for assistance in setting up these part numbers. * Standard voltage for diode is 8 volts. Any deviation requires a -2XX suffix. * Standard voltage for a MOV is 47 volts. Any deviation requires a -2XX suffix. * Standard diode/filter combination is 8 volt/VHF1 filter. Any deviation requires a -2XX suffix. * Standard MOV/filter combination is 47 volt/VHF1 filter. Any deviation requires a -2XX suffix. Connector and Filter Type Shell Finishes Shell Styles Shell Size Insert Arrangement Type of Contact and Keyway Position 21 Filter Connector Designator 21 - Filter Connector 36 - MOV Connector 47 - Diode Connector 20 Connector/Filter Type 20 - FPT with VHF-1 filter (short shell) 22 - FPTE with VHF-1 filter (short shell) 24 - FJT with VHF-1 filter (short shell) 25 - FJT with 8 volt diode/VHF-1 filter combination 26 - FAN with VHF-1 filter 29 - FLJT with VHF-1 filter (short shell) 31 - FPT with MF filter (short shell) 32 - FJT with MF filter (short shell) 33 - FPT with HF filter (long shell) 34 - FJTP with VHF-1 filter (short shell) 36 - FLJT with HF filter (long shell) 37 - FJT with HF filter (long shell-min. penetration also available) 38 - FJTP with HF filter (long shell) 39 - FJTP with MF filter (short shell) 40 - FLJT with MF filter (short shell) 41 - FJT (UTS) with VHF-1 filter (short shell) 46 - FPT (UTS) with VHF-1 filter 47 - FLJTPQ with VHF-1 filter (short shell) 48 - FLJTPQ (UTS) with VHF-1 filter (short shell) 50 - FTV (UTS) with VHF-1 filter (short shell) 51 - FTV (UTS) with HF filter (long shell) 52 - FTV with VHF-1 filter (short shell) 53 - FTV with HF-1 filter (long shell) 56 - FJTP (UTS) with VHF-1 filter 57 - FLJT with VHF-1 filter (printed circuit mount) 58 - FJTPQ (UTS) with VHF-1 filter (short shell) 60 - FTV with VHF-1 filter (printed circuit board mount, mod. flange) 61 - FBL with VHF-1 filter (short shell) 63 - FSJT with VHF-1 filter (short shell) 64 - FBL (UTS) with VHF-1 filter 65 - FSJT (UTS) with VHF-1 filter 67 - FTV with VHF-1 filter (printed circuit board mount, Std. flange) 68 - FTV (UTS) with 8 volt diode/VHF-1 filter combination 69 - FLJT with programmable filter 70 - FJT with programmable filter 71 - FTV with programmable filter 73 - M83723 bayonet coupling with VHF-1 filter 75 - FSJT with programmable filter 76 - FTV with VHF-1 filter with composite shell 77 - FLJT with 8 volt diode/VHF-1 filter combination 78 - FTV PCB mount with standard flange 79 - M83723 (UTS) with bayonet mount 80 - FTV PCB mount with standard flange and standard nut 82 - FTV with 8 volt diode/VHF-1 filter combination 83 - FSJT with 8 volt diode/VHF-1 filter combination 84 - FTV (UTS) with 8 volt diode only 85 - FBL with 8 volt/VHF-1 filter combination 87 - FLJT (UTS) with 8 volt diode/VHF-1 filter combination 96 - FPT-E (UTS) with 3-8 Nfd Pi 1500V filter 9 Shell Finishes 0 - chromate 1 - bright cadmium 2 - stainless steel (electrolitic nickel plated) 4 - electroless nickel, MS (F) 5 - gold plate over nickel 7 - cadmium plate over nickel, MS (A) 8 - bright nickel 9 - cadmium plate, nickel base, OD, MS(B), (500 hr. salt spray test) 2 Shell Styles 0 - wall mount receptacle 2 - box mount receptacle 3 - jam nut receptacle with rear thread (PT only) 4 - minimum penetration jam nut receptacle 7 - jam nut receptacle 16 Shell Size 8 through 24 - FJT and FPT shell sizes available 9 through 25 - FLJT and FTV shell sizes available 26 Insert Arrangement Refer to corresponding Mil-Spec. P Type of Contact and Insert Arrangement P - pins in a normal rotation S - sockets in a normal rotation For alternate rotations go to the table below for suffix letter. ALTERNATE ROTATION SUFFIX LETTERS FJT, FLJT or FSJT Suffix Letter Alternate Position Pins Sockets Normal P S A E F B R T C W X D Y Z FTV or FCTV Suffix Letter Alternate Position Pins Sockets Normal P S A G H B I J C K L D M N E R T Federal Vendor Identification/FSCM 77820 Alternate Position Normal W X Y Z FPT Suffix Letter Pins Sockets P S G H I J K L M N 72 FBL Series IV Suffix Letter Pins Sockets P S E F G H J L R T W X Alternate Position N A B C D K Alternate Position Normal W X Y Z 12 13 FAN Suffix Letter Pins Sockets P S G H I J K L M N C D A B See page. 60 for Programmable Filter connector ordering information. See page 62 for ordering adapters; page 69 for ordering universal How to Order EMI filter check list Date Ref. Filter P/N Filter Requirements: Filter Type (Pi, C, LC, T, LL, other) Capacitance (locations) Capacitance (locations) Ref. Mil-Spec Frequency (MHz) Insertion Loss (dB) 1 3 10 30 100 Working Voltage (VDC or VAC and frequency) Dielectric Withstand Voltage (VDC) Filter Contacts (locations) Ground Contacts (locations) Insulated feed-thru (locations) Modified Shell: (Flange moved, clinch nuts, heilicoils, stand offs, etc.) Special Requirements: (AC voltage, spike voltage, attenuation testing, thermal cycling, burn-in, capacitor lot traceability, water immersion, etc.) Contact Termination: UTS Solder Cup Wire Wrap Flat dim. Stickout dim. PCB tail: Diameter dim. Stickout dim. Pre-tin? What is terminated to connector (ie. flex, rigid flex, PCB, etc.)? Special Cleaning (if so, recommend a protective cap with an environmental gasket) Special Stamping: Customer: Program: Forecast: Requested by: Comments: 73 This Filter check list is also available on-line at www.amphenol-aerospace.com/products_filter.html. Fax completed copies to 607 563 5157 Rectangular Filter Connectors from Amphenol Canada Ferrite inductor Amphenol Filtered Rectangulars In addition to the filter interconnection products shown in this catalog, there is a wide range of filter products from Amphenol Canada which include: * Micro D * D-Sub * Rectangular 38999 * M83733 Style * ARINC 404 and ARINC 600 * Custom Rectangular Filter Designs Some products and ordering information are shown here and on page 75. Please contact Amphenol Canada for any further information and for order placement. Amphenol Canada 20 Melford Drive Scarborough, ON M1B 2X6 Canada Phone: 416-291-4401 Fax: 416-292-0647 Website: www.amphenolcanada.com Copper alloy crimp barrel termination, gold plated per MIL-G-45204. Copper alloy soldercup termination, gold plated per MIL-G-45204. Monolithic planar capacitor array Single piece machined aluminum alloy shell per QQ-A-225, plated in accordnance with 1) Electroless nickel per MIL-C-26074 or 2) Tin per MIL-T-10727 or 3) Cadmium per QQ-P-416 with clear chromate or 4) Gold per MIL-G-45204 over electroless nickel per MIL-C-26074 Beryllium copper contact springs, gold plated per MIL-G-45204. High temperature dielectric insert polyethersulfone thermoplastic per MIL-P-46185 Machined copper alloy contact, gold plated per MIL-G-45204 Beryllium copper EMI grounding spring Sealing and stress isolating elastomeric gaskets (3 places) Micro-D Filter (M83513 Style) Rack and panel mounting connectors for applications where space and weight are at a premium. For panel mount, cable mount and PCB mounting. Example part number M13-21S3CA211-000 is shown: M13 - 21 S 3 C A2 1 1 - 000 Amphenol Series M13 Special Deviations 000 - Standard Contact Arrangement 9, 15, 21, 25, 31, 37 Shell Plating 1 - Electroless nickel 2 - Tin 3 - Cadmimum (yellow) 4 - Gold Connector Type P - Pin S - Socket Mounting Styles 1 - .092" dia. hole 2 - 2-56 thread 3 - Right angle mtg. Termination Style 1 - .019 X .150 PCB 2 - .019 X .250 PCB 3 - Solder cup 4 - Right angle PCB 5 - Insulated stranded wire (18") Capacitance A2 - 150 - 300pF A3 - 300 - 500pF A6 - 600 - 1000pF 01 - 1200 - 2000pF 04 - 4000 - 8000pF 08 - 8000 - 16000pF Filter Circuits C - Capacitive P - Pi 74 Rectangular Filter Connectors from Amphenol Canada, cont. D-Sub Filter (M24308 Style) EMI Filtered D-Sub connectors designed for aerospace, industrial and commercial applications, using planar capacitors for high reliability. Example part number 308-BP1P0811-000H is shown: 308 - B P 1 P 08 1 1 - 000 H Amphenol Series Planar D-Sub Density H - High density Blank if medium density Shell Size E(1), A(2), B(3), C(4) D(5), 6 Deviation 000 = Standard Connector Type P - Pin S - Socket Shell Plating 1 - Electroless nickel 2 - Tin 3 - Cadmium (clear) Termination Style 1, 2 - Vertical PCB 3 - Solder cup 4, 5, 6, 7 - Right angle PCB 9 - Crimp, non-removable contacts 4 - Gold 5 - Zinc nickel Mounting Style 1 - .120" (3.04mm) mounting hole 2 - 4-40 Threaded cinch nut 3 - Right angle mounting bracket 4 - Right angle mounting bracket with 4-40 threaded cinch nut Filter Circuits P = Pi C = Capacitive R = CLR T = T Style L = LRC Capacitance (PF) Pi, C, CRL, LRC, T A2 = 200 to 400 04 = 4000 to 8000 A4 = 400 to 800 08 = 8000 to 16000 02 = 1800 to 3600 16 = 16000 to 32000 458 Filtered (83733) & F39 Filtered (R39) 458 Series filter rack and panel connectors offer the cost advantages of planar ceramic technology in conjuction with stress isolation techniques. F39 filter connectors provide the same advantages in custom rectangular connectors using 38999 Series II contacts. Example part number 458-A131P-TCA1-XXX is shown: 458 - A 131 P - T CA1 - XXX Amphenol Series 458 for Filtered 83733 F39 for Filtered R39 000 XXX for specials Filter Style CA2, C01, C02, C10, PA4, P02, P04, P08, P1 Shell Size Insert Pin/Socket Termination Styles S =Solder Cup B = PCB T = Crimp ARINC Filter (404 & 600) Rack and panel ARINC 404 connectors meet or exceed MIL-C-81659 and ARINC Spec. 404. ARINC 600 connectors is the successor to the 404 for many new avionic designs. Example part number F85-6RB2A150B121C13W2P02X is shown: F85 - 6 R B 2 A150B121C13W2 P 02 X Amphenol Series 485 is Production part designation F85 is Catalog/Website description only ARINC Series 4 = ARINC 404 or MIL-C-81659 6 = ARINC 600 Deviation Style A = Adapter Filter Circuit P = Pi C = Capacitance P = Plug Capacitance Same as 308 Series R = Receptacle Termination B = PC Tails S = Solder Cup Shell Size A, B (ARINC 404) 1, 2, 3 or 4 75 Layout Designator ARINC 600 Define inserts for each cavity Define inserts and gender (P or S) ARINC 404 for each cavity (e.g. 106P) (R) Amphenol EMI/Transient Protection specials The Hermetic Filter Connector While only approximately 1/2 inch longer than standard series connectors, the hermetic filter connector provides all the benefits of a hermetic connector, as well as EMI protection for sensitive circuits. The filter assembly is protected by a fused glass insert within a unique steel housing. This design accounts for the connector's capability in tolerating high level static pressure, while maintaining a low level leakage rate. Applications include pressurized test equipment, environmental and toxic gas chambers, and moisture sealing on industrial equipment and missiles. Hermetic Filter Connector Filtered Plug This connector is designed for applications where EMI protection is essential, but access to the receptacle is denied. The filtered plug Filtered Plug presents an alternative for the electrical engineer. The filter plug is designed with the same components as a standard filter receptacle, but offers the option of being mounted on the cable harness. This device is a cost effective method of achieving EMI protection when length restrictions prohibit inclusion of an adapter to the system. Filter Connectors can also incorporate high frequency coax, twinax, triax, quadrax and differential twinax contacts. Amphenol MIL-DTL-38999 Series III connectors are the most commonly used connectors for incorporation of shielded contacts along with traditional crimp contacts. High performance shielded coaxial, twinax and triax contacts are available to fit various RG and special cables. They eliminate discontinuities or impedance variations due to movement of parts under axial load. Size 8 quadrax and differential twinax contacts provide high speed data transfers. Filter Connectors with Coax Shielded Contacts Filter Connectors with Flex Termination Flex circuits are available for MIL-DTL-38999, MIL-DTL-5015 and MIL-C-26482 filter connectors. They are offered in flat or sculptured styles and provide flexibility in assembling to printed circuit boards. Through Amphenol's Advanced Circuit Technology division, these strong and rigid, yet highly flexible circuits eliminate the need to purchase and attach individual pins or connectors. Thus they promote system automation, reduce space requirements and lower installation costs. Sculptured(R) Flexible Circuits have built-in terminations which eliminate the failure associated with crimped or soldered-on contacts, and geometrically fit the tight space requirements within a unit. For more information on these specials, consult Amphenol Aerospace and see our website at www.amphenol-aerospace.com. Flex Circuitry for Attachment to Printed Circuit Boards 76 MIL-DTL-38999 with Quadrax Contacts