LED Permanent Beacon * LED Permanent Beacon in attractive quadratic form * Innovative connector to create traffic light combinations * Easy assembly due to quickrelease screws * Thread/membrane combination keeps cabling requirements to a minimum * Also available in 48 V n uratio rs Life d 50,000 h o t p u Technical Specifications: Dimensions (L x H x W): Housing: Lens: Connection: Fixing: Current consumption: Equipment: 85 mm x 85 mm x 72 mm PP-GF, black PC, transparent Screw terminal with wire protection, max. 1.5 mm2 Wall, base and ceiling mounting Max. 80 mA at 24 V Elastic self-sealing membranes for cable entry without tools Eight integrated M20 threads, no nuts required Optional use of a cable gland, thread length of cable gland 9 mm (accessory) Incl. snap-on fixing bracket (optional use, see page 152) Assembly: Order Specifications: Voltage red green yellow clear blue 12 V DC 853 100 54 853 200 54 853 300 54 853 400 54 853 500 54 24 V DC 853 100 55 853 200 55 853 300 55 853 400 55 853 500 55 48 V AC 853 100 66 853 200 66 853 300 66 853 400 66 853 500 66 115-230 V AC 853 100 60 853 200 60 853 300 60 853 400 60 853 500 60 Accessories: 975 853 01 975 853 02 Connector for traffic light combinations Cable gland M20 x 1.5 mm, 8mm thread length The innovative connector (accessory) enables traffic light combinations to be created in a matter of seconds ADDITIONAL INFORMATION: Combinations made easy The LED Beacon 853 can be easily turned into a traffic light combination. Simply attach different coloured beacons together using the connector. The eight cable entries with both self-sealing membranes and integrated M20 threads enable additional beacons to be attached to every side. There is no limit to the range of possible lighting designs that can be created. Traffic light configurator at www.werma.com Sizes of Permanent Beacons Technical Diagrams: see page 321 See note on page 347 24 V +50C 160 www.werma.com g IP 67 -25C PLC 135 Optical Signal Devices Free-standing Beacons * Permanent Beacons 853 853 LED Double Flash Beacon * Easy assembly due to quick-release screws * Thread/membrane combination keeps cabling requirements to a minimum * Also available in 48 V * LED Double Flash Beacon in attractive quadratic form * Intense double flash with low power consumption * Innovative connector to create traffic light combinations n uratio Life d ,000 hrs 50 up to Optical Signal Devices Free-standing Beacons * Flashing Beacons Technical Specifications: Dimensions (L x H x W): Housing: Lens: Connection: Fixing: Current consumption: Equipment: 85 mm x 85 mm x 72 mm PP-GF, black PC, transparent Screw terminal with wire protection, max. 1.5 mm2 Wall, base and ceiling mounting Max. 80 mA at 24 V Eight self-sealing membranes for cable entry without tools Eight integrated M20 threads, no nuts required Optional use of a cable gland, thread length of cable gland 9 mm (accessory) Incl. snap-on fixing bracket (optional use) Assembly: Order Specifications: Intense double flash effect with low power consumption Voltage red green yellow clear blue 12 V DC 853 110 54 853 210 54 853 310 54 853 410 54 853 510 54 24 V DC 853 110 55 853 210 55 853 310 55 853 410 55 853 510 55 48 V AC 853 110 66 853 210 66 853 310 66 853 410 66 853 510 66 115-230 V AC 853 110 60 853 210 60 853 310 60 853 410 60 853 510 60 Accessories: 975 853 01 Connector for traffic light combinations (For further information see page 135) Cable gland M20 x 1.5 mm 8 mm thread length 975 853 02 ADDITIONAL INFORMATION: Time-saving alternative: The snap-on fixing bracket (included in assembly) Sizes of Flashing Beacons Save time installing the product To fix the 853 beacon to the wall four holes have to be drilled. To speed things up the snap-on fixing bracket delivered with the beacon offers a time-saving alternative: simply drill two holes to attach the fixing bracket to the wall and snap the beacon onto it. The cable can be fed through one of the eight self-sealing membranes without any tools saving 30% of the usual installation time. Once the cable has been connected to the terminals, the lens can be clipped onto the base and secured using the four captive quick-release screws. Technical Diagrams: see page 321 24 V +50C 160 152 www.werma.com g IP 67 -25C PLC Easy assembly due to quick-release screws 853Traffic Light * LED Permanent, LED Double Flash or LED EVS* Beacon in attractive quadratic form * Innovative connector to create traffic light combinations * Easy assembly due to quick-release screws * Thread/membrane combination keeps cabling requirements to a minimum n uratio Life d ,000 hrs 50 up to Technical Specifications: Dimensions (L x H x W): Housing: Lens: Connection: Fixing: Possible colours: Operating voltage: Current consumption: Equipment: The innovative connector (accessory) enables traffic light combinations to be created in a matter of seconds Assembly: Optical Signal Devices Free-standing Beacons * Traffic Lights 85 mm x 85 mm x 72 mm PP-GF, black PC, transparent Screw terminal with wire protection, max. 1.5 mm2 Wall, base and ceiling mounting Red, green, yellow, clear, blue 12 V DC, 24 V DC, 115-230 V AC Max. 80 mA at 24 V (LED Permanent Beacon) Max. 80 mA at 24 V (LED Double Flash Beacon) Max. 200 mA at 24 V (LED EVS Beacon) Eight self-sealing membranes for cable entry without tools Eight integrated M20 threads, no nuts required Optional use of a cable gland, thread length of cable gland 9 mm (accessory) Incl. snap-on fixing bracket (optional use) Order Specifications: see page 135 see page 152 see page 153 see page 252 LED Permanent Beacon 853 LED Double Flash Beacon 853 LED EVS Beacon 853 Sounder 153 Accessories: 975 853 01 975 853 02 Connector for traffic light combinations Cable gland M20 x 1.5 mm, 8 mm thread length nt Pate ed ov appr Three highly visible light effects are available ADDITIONAL INFORMATION: Combinations made easy The LED Beacon 853/Sounder 153 can be easily turned into a traffic light combination. Simply attach different coloured beacons or sounder together using the connector. The eight cable entries with both self-sealing membranes and integrated M20 threads enable additional beacons to be attached to every side. There is no limit to the range of possible lighting designs that can be created. Traffic light configurator at www.werma.com Technical Diagrams: The LED beacon can be used with the sounder see page 321 See note on page 347 Individual lighting designs thanks to eight possible cable entries 853 X00 XX 853 X10 XX 853 X20 XX 24 V +50C 135 www.werma.com g 130 g 130 g IP 67 -25C PLC 179 851 852 853 Technical Diagrams 850 860.000.03 860.000.04 ADDITIONAL INFORMATION: You are welcome to request the technical diagrams in digital form. The relevant 3D models, instruction leaflets and connection diagrams can be obtained from us or downloaded from our homepage at any time. www.werma.com 321 310_853_001_14-07.fm Seite 1 Donnerstag, 17. Juli 2014 2:37 14 310.853.001.0714 S I G N A L T E C H N I K 853/153 853 x20 xx EN 60947-5-1 / VDE 0660 Anschluss ausschlielich durch ausgebildete Elektro-Fachkrafte. Electrical connection is to be made by trained electrical specialists only. Le branchement doit uniquement etre effectue par des professionnels. Il collegamento deve essere eseguito solo da elettricisti specializzati. La conexion solo debe ser realizada por electricistas debidamente formados. A ligacao deve ser feita exclusivamente por profissional eletrico especializado. De aansluiting mag enkel gebeuren door erkende vakmensen. Pipojeni smi provadt pouze kvalifikovany personal. Podczenie wycznie przez specjalistow-elektrykow. Liittaminen kuuluu ainoastaan koulutettujen sahkoalan ammattilaisten tehtaviin. -. Balanti sadece eitimli elektrik teknisyenleri tarafindan yapilmalidir. 310.853.001.0714 Bei Epilepsie ungeeignet! Unsuitable for epilepsy sufferers Ne convient pas aux personnes souffrant d'epilepsie Inadatto per epilettici Inadecuado para epilepticos Nao aconselhavel a pessoas que sofram de Epilepsia Niet geschikt voor epileptici. Nevhodne pro epileptiky Nie stosowa przy zchorzeniu padaczki Ei sovellu epileptikoille Epilepsi hastalii olanlarin kullanmamasi onerilir 853 x00 54 853 x00 55 853 x00 66 853 x00 60 853 x10 54 853 x10 55 853 x10 66 853 x10 60 853 x20 54 853 x20 55 853 x20 66 853 x20 60 153 000 54 153 000 55 153 000 66 153 000 60 12 VDC, 180 mA, I0 < 1250 mA 24 VDC, 80 mA, I0 < 500 mA 48 V~, 35 mA, I0 < 200 mA 115-230 V~, 40 mA, I0 < 7 A 12 VDC, 100 mA, I0 < 1250 mA 24 VDC, 80 mA, I0 < 500 mA 48 V~, 90 mA, I0 < 2 A 115-230 V~, 180 mA, I0 < 7 A 12 VDC, 400 mA, I0 < 1250 mA 24 VDC, 200 mA, I0 < 500 mA 48 V~, 95 mA, I0 < 2 A 115-230 V~, 180 mA, I0 < 7 A 12 VDC, 70 mA, I0 < 500 mA 24 VDC, 120 mA, I0 < 500 mA 48 V~, 150 mA, I0 < 2 A 115-230 V~, 75 - 150 mA, I0 < 7 A (c) (vgl. Abb. 7b,c / see Fig. 7b,c / ref. Ill. 7b,c) Stufe Code Stage Niveau 123 1 000 2 3 4 001 010 011 5 100 Tonart Tone type Tonalite Dauerton, continuous, continu Hupenton, horn tone, trompe 1 Hz Ton, 1 Hz tone, 1 Hz ton 20 Hz Trillerton, 20 Hz whistle tone, 20 Hz trille ansteigend, rising, montant Frequenz Frequencies Frequence ca. 3000 Hz ca. 110 Hz ca. 3000 Hz ca. 3000 Hz 800 - 970 Hz @ 1 Hz 6 101 7 110 8 111 ansteigend, rising, montant 2400 - 2850 Hz @ 7 Hz abfallend, falling, incline 1200 - 500 Hz @ 1 Hz alternierend, alternating, alter- 800/1200 Hz @ nant 1 Hz 1 2 2a 2a - 853 2b - 153 310_853_001_14-07.fm Seite 2 Donnerstag, 17. Juli 2014 2:37 14 2b 4b 7 7a - 853 7b - 153 000 54 / 153 000 55 7c - 153 000 60 / 153 000 66 8 853 x10 60, 853 x10 66 853 x20 60, 853 x20 66 153 000 60, 153 000 66 9 9a - 853 9b - 153 7a 3 3a - 853 3b - 853 + 975 853 01 3a 7b 5 9a 3b optional 6 975 853 01 7c 9b 4a 310.853.001.0714 (c) S I G N A L T E C H N I K 310_853_001_14-07.fm 17.7.14 www.krea-team.de