Transistor 2SC1318A Silicon NPN epitaxial planer type For low-frequency driver amplification Complementary to 2SA0720A (2SA720A) Unit: mm High collector to emitter voltage VCEO. Optimum for the driver stage of a low-frequency and 25 to 30W output amplifier. Absolute Maximum Ratings (Ta=25C) Parameter Symbol Ratings Unit Collector to base voltage VCBO 80 V Collector to emitter voltage VCEO 70 V Emitter to base voltage VEBO 5 V Peak collector current ICP 1 A Collector current IC 0.5 A Collector power dissipation PC 750 mW Junction temperature Tj 150 C Storage temperature Tstg -55 ~ +150 C Electrical Characteristics +0.2 +0.2 0.45 -0.1 0.45 -0.1 1.27 1.27 2.30.2 13.50.5 Features 4.00.2 5.10.2 5.00.2 1 2 3 2.540.15 1:Emitter 2:Collector 3:Base JEDEC:TO-92 EIAJ:SC-43A (Ta=25C) Parameter Symbol Conditions min typ Unit 0.1 A ICBO Collector to base voltage VCBO IC = 10A, IE = 0 80 V Collector to emitter voltage VCEO IC = 2mA, IB = 0 70 V Emitter to base voltage VEBO IE = 10A, IC = 0 5 hFE1*1 VCE = 10V, IC = 150mA*2 85 160 hFE2 VCE = 10V, IC = 500mA*2 40 100 VCE(sat) IC = 300mA, IB = 30mA*2 0.2 0.6 Base to emitter saturation voltage VBE(sat) IC = 300mA, IB = 30mA*2 0.85 1.5 Transition frequency fT VCB = 10V, IE = -50mA, f = 200MHz 120 Collector output capacitance Cob VCB = 10V, IE = 0, f = 1MHz 11 Forward current transfer ratio Collector to emitter saturation voltage VCB = 20V, IE = 0 max Collector cutoff current V 340 FE1 V MHz 20 *2 *1h V pF Pulse measurement Rank classification Rank Q R S hFE1 85 ~ 170 120 ~ 240 170 ~ 340 Note.) The Part number in the Parenthesis shows conventional part number. 1 2SC1318A Transistor PC -- Ta IC -- VCE 1.2 IC -- I B 1.2 1.2 1.0 0.8 0.6 0.4 0.2 9mA 8mA 7mA 0.8 6mA 5mA 0.6 4mA 3mA 0.4 2mA 0.2 0 40 60 80 100 120 140 160 2 4 6 8 10 0 Collector to emitter voltage VCE (V) 3 1 0.3 Ta=75C 25C -25C 0.01 0.003 0.001 30 10 3 25C 1 10 30 100 300 Ta=-25C 75C 0.3 0.1 0.03 1000 3 10 fT -- IE 140 120 100 80 60 40 20 0 -1 30 100 300 1000 -10 25C -25C 150 100 50 3 -30 Emitter current IE (mA) -100 30 100 300 1000 ICBO -- Ta 104 50 VCB=20V IE=0 f=1MHz Ta=25C 45 10 Collector current IC (mA) 40 103 35 30 25 20 102 15 10 10 5 1 0 -3 Ta=75C 200 1 ICBO (Ta) ICBO (Ta=25C) 160 10 250 Cob -- VCB Collector output capacitance Cob (pF) 180 8 VCE=10V Collector current IC (A) VCB=10V Ta=25C 6 0 1 Collector current IC (mA) 200 4 300 IC/IB=10 0.01 3 2 Base current IB (mA) hFE -- IC 100 Base to emitter saturation voltage VBE(sat) (V) Collector to emitter saturation voltage VCE(sat) (V) IC/IB=10 1 0.4 VBE(sat) -- IC 10 0.03 0.6 0 0 VCE(sat) -- IC 0.1 0.8 0.2 1mA Forward current transfer ratio hFE 20 Ambient temperature Ta (C) Transition frequency fT (MHz) 1.0 0 0 2 VCE=10V Ta=25C Collector current IC (A) 1.0 Collector current IC (A) Collector power dissipation PC (W) Ta=25C IB=-10mA 1 3 10 30 100 Collector to base voltage VCB (V) 0 60 120 180 Ambient temperature Ta (C) 2SC1318A Transistor ICEO -- Ta 105 VCE=10V ICEO (Ta) ICEO (Ta=25C) 104 103 102 10 1 0 20 40 60 80 100 120 140 Ambient temperature Ta (C) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR