Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EE96 –
φ10<
φd±0.05
Sleeve
14 min.
3 min.
L✽
✽L<16:L±1.5
L>20:L±2.0
Pressure relief
φ6.3<+
–
φ5toφ8
φD±0.5
F±0.5
φD±0.5
■Features
● Low impedance (40 % to 70 % less than FC Se ries)
● Endurance : 2000 h to 7000 h at +105 °C
● RoHS directive compliant
Radial Lead Type
Series: FM Type: A
■Specifi cations
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 22 µF to 6800 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV (µA) After 2 minutes
tan δ
W.V. 6.3 10 16 25 35 50 (max.) (120 Hz/+20 °C)
tan δ0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 µF for products of 1000 µF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
φ5 to φ6.3 : 2000 hours, φ8
11.5 to φ8
15: 3000 hours
φ8×20 to φ
10
16 : 4000 hours, φ
10
20 to φ
12.5
20/ φ
16
20: 5000 hours
φ
12.5×25 to φ
12.5
35/ φ
16
25 : 7000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■Di men sions in mm (not to scale)
W.V.(V.DC) Cap (µF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 50
22 to 33 0.45 0.55 0.75 0.90 1.00
47 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 6800 0.75 0.80 0.95 1.00 1.00
■Frequency correction factor for ripple current
Body Dia. φD56.3810 12.5 16
Body Length L — — — — 12.5 to 25 30 to 40 —
Lead Dia. φd0.50.50.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5
(mm)
[mm]
■Attention
Not applicable for automotive
Sep. 201101
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EE97 –
■Case size/Impedance/Ripple current
W.V.(V.DC) 6.3 V to 35 V 50 V
Case size
(φD
L)
Imped ance
(/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
Imped ance
(/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C –10 °C +105 °C +20 °C –10 °C +105 °C
5
11 0. 3 0 0 1.000 280 0.340 1.130 250
6.3
11.2 0.13 0 0.4 3 0 4 5 50.1400.460 405
8
11.5 0.056 0.168 950 0.061 0.183 870
8
15 0.041 0.123 1240 0.045 0.135 1140
8
20 0.030 0.090 1560 0.033 0.099 1430
10
12.5 0.038 0.114 1290 0.042 0.126 1170
10
16 0.026 0.078 1790 0.030 0.090 1650
10
20 0.019 0.057 2180 0.023 0.069 1890
10
25 0.018 0.054 2470 0.022 0.066 2150
12.5
20 0.018 0.045 2600 0.022 0.055 2260
12.5
25 0.015 0.038 3190 0.018 0.045 2660
12.5
30 0.013 0.033 3630 0.016 0.040 3160
12.5
35 0.012 0.030 3750 0.014 0.035 3270
16
20 0.017 0.043 3300 0.019 0.048 2870
16
25 0.014 0.035 3820 0.016 0.040 3320
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EE98 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Long
Lead Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
6.3
150 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM0J151( ) 200 2000
330 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM0J331( ) 200 2000
560 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM0J561( ) 200 1000
820 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM0J821L( ) 200 1000
1000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM0J102( ) 200 500
1200 8 20 15600.030 4000 0.6 3.5 5.0 EEUFM0J122L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM0J122( ) 200 500
1500 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM0J152( ) 200 500
2200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM0J222L( ) 200 500
3300 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM0J332( ) 200 500
3900 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM0J392( ) 200 500
4700 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM0J472L 100
5600 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM0J562L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM0J562S( ) 100 250
6800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM0J682( ) 100 250
10
100 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1A101( ) 200 2000
220 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1A221( ) 200 2000
470 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1A471( ) 200 1000
680 8 15 12400.041 3000 0.6 3.5 5.0 EEUFM1A681L( ) 200 1000
10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1A681( ) 200 500
1000 8 20 15600.030 4000 0.6 3.5 5.0 EEUFM1A102L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1A102( ) 200 500
1200 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1A122( ) 200 500
1500 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1A152L( ) 200 500
2200 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1A222( ) 200 500
3300 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1A332( ) 200 500
3900 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1A392L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1A392S( ) 100 250
4700 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1A472L 100
5600 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1A562( ) 100 250
16
68 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1C680( ) 200 2000
120 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1C121( ) 200 2000
330 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1C331( ) 200 1000
470 8 15 12400.041 3000 0.6 3.5 5.0 EEUFM1C471L( ) 200 1000
10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1C471( ) 200 500
680 8 20 15600.030 4000 0.6 3.5 5.0 EEUFM1C681L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1C681( ) 200 500
1000 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1C102( ) 200 500
1200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1C122L( ) 200 500
1500 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1C152( ) 200 500
2200 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1C222( ) 200 500
2700 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1C272L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1C272S( ) 100 250
3300 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1C332L 100
3900 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1C392( ) 100 250
When requesting taped product, please put the letter "B" of "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EE99 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Long
Lead Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
25
47 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1E470( ) 200 2000
100 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1E101( ) 200 2000
220 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1E221( ) 200 1000
330 8 15 12400.041 3000 0.6 3.5 5.0 EEUFM1E331L( ) 200 1000
10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1E331( ) 200 500
470 8 20 15600.030 4000 0.6 3.5 5.0 EEUFM1E471L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1E471( ) 200 500
680 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1E681( ) 200 500
820 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1E821L( ) 200 500
1000 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1E102( ) 200 500
1500 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1E152( ) 200 500
1800 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1E182L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1E182S( ) 100 250
2200 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1E222L 100
2700 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1E272( ) 100 250
35
33 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1V330( ) 200 2000
68 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1V680( ) 200 2000
150 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1V151( ) 200 1000
220 8 15 12400.041 3000 0.6 3.5 5.0 EEUFM1V221L( ) 200 1000
10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1V221( ) 200 500
330 8 20 15600.030 4000 0.6 3.5 5.0 EEUFM1V331L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1V331( ) 200 500
470 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1V471( ) 200 500
560 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1V561L( ) 200 500
680 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1V681( ) 200 500
1000 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1V102( ) 200 500
1200 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1V122L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1V122S( ) 100 250
1500 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1V152L 100
1800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1V182( ) 100 250
50
22 5 11 250 0.340 2000 0.5 2.0 5.0 2.5 EEUFM1H220( ) 200 2000
56 6.3 11.2 405 0.140 2000 0.5 2.5 5.0 2.5 EEUFM1H560( ) 200 2000
100 8 11.5 870 0.061 3000 0.6 3.5 5.0 EEUFM1H101( ) 200 1000
120 8 15 1140 0.045 3000 0.6 3.5 5.0 EEUFM1H121L( ) 200 1000
150 10 12.5 1170 0.042 4000 0.6 5.0 5.0 EEUFM1H151( ) 200 500
180 8 20 1430 0.033 4000 0.6 3.5 5.0 EEUFM1H181L( ) 200 1000
220 10 16 1650 0.030 4000 0.6 5.0 5.0 EEUFM1H221( ) 200 500
270 10 20 1890 0.023 5000 0.6 5.0 5.0 EEUFM1H271( ) 200 500
330 10 25 2150 0.022 5000 0.6 5.0 5.0 EEUFM1H331L( ) 200 500
470 12.5 20 2260 0.022 5000 0.6 5.0 5.0 EEUFM1H471( ) 200 500
560 12.5 25 2660 0.018 7000 0.6 5.0 5.0 EEUFM1H561( ) 200 500
680 12.5 30 3160 0.016 7000 0.8 5.0 EEUFM1H681L 100
820 12.5 35 3270 0.014 7000 0.8 5.0 EEUFM1H821L 100
16 20 2870 0.019 5000 0.8 7.5 7.5 EEUFM1H821S( ) 100 250
1000 16 25 3320 0.016 7000 0.8 7.5 7.5 EEUFM1H102( ) 100 250
When requesting taped product, please put the letter "B" of "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Sep. 201000
