DC/DC Converters TMR 1 & TMR 1SM Series, 1 Watt Features Wide 2:1 input voltage range Compact SIP-6 or SMD package Fully regulated outputs Cost optimised design No minimum load required Continuous short circuit protection Temperature range -40C to +85C I/O isolation 1500 VDC Remote On/Off control (SMD) 3-year product warranty CB UL 60950-1 Scheme The TMR-1 and TMR 1SM series are families of isolated 1 W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. These products come in a compact SIP-6 or SMD package with small footprint occupying only 1.2 cm2 (0.2 square inch) of board space. An excellent efficiency allows -40C to +85C operation temperature. Further features include remote On/Off control (SMD-Version) and continuous short circuit protection. The compact dimensions and cost optimised design make this converters an ideal solution for applications in communication equipment, instrumentation and industrial electronics. Models Order code SIP-package Order code SMD-package TMR 1-0511 TMR 1-0512 TMR 1-0513 TMR 1-0515 TMR 1-0522 TMR 1-0523 TMR 1-1211 TMR 1-1212 TMR 1-1213 TMR 1-1215 TMR 1-1222 TMR 1-1223 TMR 1-2411 TMR 1-2412 TMR 1-2413 TMR 1-2415 TMR 1-2422 TMR 1-2423 TMR 1-4811 TMR 1-4812 TMR 1-4813 TMR 1-4815 TMR 1-4822 TMR 1-4823 TMR 1-0511SM TMR 1-0512SM TMR 1-0513SM TMR 1-0522SM TMR 1-0523SM TMR 1-1211SM TMR 1-1212SM TMR 1-1213SM TMR 1-1222SM TMR 1-1223SM TMR 1-2411SM TMR 1-2412SM TMR 1-2413SM TMR 1-2422SM TMR 1-2423SM TMR 1-4811SM TMR 1-4812SM TMR 1-4813SM TMR 1-4822SM TMR 1-4823SM http://www.tracopower.com Input voltage range Output voltage 4.5 - 9.0 VDC (5 VDC nominal) 9.0 - 18 VDC (12 VDC nominal) 18 - 36 VDC (24 VDC nominal) 36 - 75 VDC (48 VDC nominal) 5.0 VDC 12 VDC 15 VDC 24 VDC 12 VDC 15 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC 12 VDC 15 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC 12 VDC 15 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC 12 VDC 15 VDC Output current max. Efficiency SIP typ. Efficiency SMD typ. 200 mA 83 mA 67 mA 42 mA 42 mA 33 mA 200 mA 83 mA 67 mA 42 mA 42 mA 33 mA 200 mA 83 mA 67 mA 42 mA 42 mA 33 mA 200 mA 83 mA 67 mA 42 mA 42 mA 33 mA 76 % 77 % 79 % 76 % 77 % 78 % 77 % 77 % 80 % 77 % 79 % 78 % 77 % 80 % 80 % 77 % 80 % 80 % 77 % 78 % 78 % 76 % 79 % 79 % 78 % 79 % 81 % 79 % 80 % 79 % 79 % 82 % 81 % 80 % 79 % 82 % 82 % 82 % 82 % 79 % 80 % 80 % 81 % 81 % Page 1 of 4 DC/DC Converters TMR 1 & TMR 1SM 1 Watt Input Specifications Input current at no load (nominal input voltage) 5.0 12 24 48 V V V V models: models: models: models: 40 mA typ. 20 mA typ. 10 mA typ. 7 mA typ. Surge voltage (1 sec. max.) 5.0 12 24 48 V V V V models: models: models: models: 15 V max. 25 V max. 50 V max. 100 V max. Start-up voltage / under voltage lockout 5.0 V models: 4.5 VDC / 4 VDC or lower 12 V models: 9 VDC / 8.5 VDC or lower 24 V models: 18 VDC / 17 VDC or lower 48 V models: 36 VDC / 34 VDC or lower long term operation at undervoltage will damage the converter! Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor. see EMC consideration Recommended input fuse (slow blow) 5 12 24 48 V V V V models: models: models: models: 500 mA 250 mA 120 mA 60 mA Output Specifications Voltage set accuracy 1 % max. Regulation - Input variation Vin min. to Vin max. - No load to full load Single & Dual output models: - Load variation 10 - 90% Single output models: Dual output models: 0.2 % max. 1.0 % max. 0.5 % max. 0.8 % max. Minimum load no minimum load required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz bandwidth) SMD models: 30 mVp-p max. SIP models: 50 mVp-p max. Transient response setting time (25% load step change) 250 s typ. (PFM) Transient response deviation 5 % max. Current limitation >120 % of Iout max. Over load protection (Foldback) 130 % Short circuit protection continuous, automatic recovery Capacitive load 5 12 15 24 12 15 VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: 1`680 F max. 820 F max. 680 F max. 470 F max. 470 F max. (each output) 330 F max. (each output) General Specifications Temperature ranges - Operating SIP models: SMD models: - Case temperature - Storage Load derating -40C to +85C with no derating -40C to +82C with derating +105C (SIP) / +95C (SMD) max. -55C to +125C SMD models: 7.2 %/K above +75C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >2.8 Mio h All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TMR 1 & TMR 1SM 1 Watt General Specifications Isolation voltage (60 sec.) - Input/Output 1'500 VDC Isolation capacitance - Input/Output 50 pF max. Isolation resistance - Input/Output (500 VDC) >1 GOhm Switching frequency 220 kHz (PFM) Safety standards CAN/CSA-C22.2 No 60950-1-07 Incl. AM1 (2011) ANSI/UL Std No 60950-1, 2nd Ed. Incl. AM1 (2011) IEC 60950-1:2005 (2nd Edition); +A1:2009 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 - Certification documents www.tracopower.com/overview/tmr1 Remote On/Off (SMD models only) - On: - Off: - Off standby current: - Off control input current: < 0.6 VDC or open circuit 2.7 to 15 VDC (ref. to -Vin) 2.5 mA max. 1 mA max. Physical Specifications Casing material non-conductive plastic (UL94V-0 rated) Potting material (for SIP-package models) epoxy, (UL 94V-0 rated) Weight 3.1 g (0.11oz) (SIP)/3.3 g (0.12oz) (SMD) Soldering profile for SIP-package models max. 265C / 10 sec. (wave soldering) Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at: www.jedec.org - free registration required) Washing Process (for SMD-package) not recommended. Product non-hermetical. Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at: www.jedec.org - free registration required) Environmental compliance - Reach www.tracopower.com/overview/tmr1 - RoHS RoHS directive 2011/65/EU EMC Consideration Filter suggestion for to comply with EN55022 class A conducted noise emission Single output models L1 +Vin Dual output models L1 +Vout Load C1 -Vin +Vin +Vout Com. C1 -Vout -Vin C2 -Vout Load Load C2 Input models C1 5 VDC 4.7F /50V, 1210 X7R C2 4.7H / 1.2 A, SR0302 12 VDC 4.7F /50V, 1210 X7R 4.7H / 1.2 A, SR0302 24 VDC SIP 4.7F /50V, 1210 X7R 24 VDC SMD 4.7F /50V, 1210 X7R 48 VDC SIP 4.7F /100V 1210 X7R 18H / 0.58A, SR0302 48 VDC SMD 2.2F / 00V 1210 X7R 18H / 0.58A, SR0302 220pF /2 kV, 1808 X7R L1 18H / 0.58 A, SR0302 12H / 0.75 A, SR0302 Page 3 of 4 DC/DC Converters TMR 1 & TMR 1SM 1 Watt Outline Dimensions mm (inches) 11.0 Pinout 3.2 (0.13) 0.5 (0.02) (0.4) SIP-Package 0.5 (0.02) 2.3 0.4 2.54 5.08 (0.1) (0.2) (0.09 0.02) 2.54 2.54 (0.1) 0.5 (0.02) (0.1) Pin single output dual output 1 -Vin (GND) -Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 4 +Vout +Vout 5 No Pin Common 6 -Vout -Vout 2 4 5 6 2.5 0.5 (0.02) 7.62 1 (0.10) Bottom view (0.30) 0.25 (0.01) 17.0 (0.67) Solder Pad Dimensions SMD-Package 15.24 [0.6] 18.9 [0.74] 1 6 2 O1.5 [O0.06] [0.1] 1.6 [0.06] 18.6 [0.73] vent hole on bottom side (for reflow soldering process) Pinout 0.25 [0.01] 1.00 [0.04] 13.7 [0.54] 2.54 8.45 [0.33] 4.0 [0.16] 7 2.4 [0.1] Top View 17.2 [0.68] 8 8.7 [0.34] 9 14 16.15 [0.64] 2.54 [0.1] 12.7 [0.5] 13.7 [0.54] 5.5 [0.22] 1.8 [0.1] S SEATING PLANE Pin single output dual output 1 -Vin (GND) -Vin (GND) 2 Remote On/Off Remote On/Off 6 ntc Common 7 ntc -Vout 8 +Vout +Vout 9 -Vout Common 14 +Vin +Vin 1.1 [0.04] 15.0 [0.6] 0~ 4 ntc = not to connect to electrical circuit 0.15 S Dimensions in [mm], () = Inch Tolerances: 0.5 (0.02) Pin pitch tolerances: 0.25 (0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. March 21. 2016 Page 4 of 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TMR 1-1222 TMR 1-2422 TMR 1-0511 TMR 1-1211 TMR 1-2411 TMR 1-2412 TMR 1-4811 TMR 1-0513 TMR 11223 TMR 1-4815 TMR 1-0515 TMR 1-1212 TMR 1-4823 TMR 1-2415 TMR 1-4822 TMR 1-0522 TMR 1-2413 TMR 1-4812 TMR 1-0523 TMR 1-1215 TMR 1-2423 TMR 1-0512 TMR 1-1213 TMR 1-4813