TPC Series Low ESR TACmicrochipTM The world's smallest surface mount Tantalum capacitor, small enough to create space providing room for ideas to grow. TACmicrochipTM is a major breakthrough in miniaturization without reduction in performance. It offers you the highest energy store in an 0603 or 0805 case size; enhanced high frequency operation through unique ESR performance with temperature and voltage stability. ENVIRONMENTAL FRIENDLY COMPONENT L CASE DIMENSIONS: millimeters (inches) POLARITY BAND NOT TO EXCEED CENTER LINE Code EIA Code % Lt W Length (L) Width (W) Termination Spacing(S) Height (H) +0.15 +0.15 0.85 -0.00 0.85 -0.00 +0.006 +0.006 +0.008 (0.063 -0.000 ) (0.033 -0.000 ) (0.033 -0.000 ) +0.15 +0.15 +0.20 2.00 -0.00 1.35 -0.00 1.35 -0.00 2012-15 +0.006 +0.006 +0.008 (0.079 -0.000 ) (0.053 -0.000 ) (0.053 -0.000 ) Minimum Average Termination Mass Length (Lt) +0.20 L 0603 1608-10 R 0805 H S EIA Metric 1.60 -0.00 0.65 min 0.15 (0.006) 8.6mg 0.85 min 0.15 (0.006) 29.9mg HOW TO ORDER TPC R 106 M 010 R 1800 Type TACmicrochipTM Case Code 0603=L 0805=R Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K=10% M=20% Rated DC Voltage 002=2Vdc 003=3Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc 020=20Vdc 025=25Vdc Packaging (see table below) Maximum ESR in Milliohms See note below NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. Packaging Suffix Standard Reel Tin Termination Size Plastic Tape Case R/L 7" Rxxxx 1 Xxxxx 4 4" Gold Termination Plastic Tape R/L Axxxx Fxxxx NOTE: xxxx = ESR Value in Milliohms TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: Termination Finish: 36 +85C: +125C: +85C: +125C: All technical data relate to an ambient temperature of +25C 3.3F to 47F 10%; 20% 0.01CV or 0.5A whichever is the greater 3 4 6.3 10 16 20 25 2 2.7 4 7 10 13 17 3.9 5.2 8 13 20 26 32 2.6 3.2 5 8 12 16 20 -55C to +125C 1% per 1000 hours at 85C, V with 0.1/V series impedance, 60% confidence level Nickel and Tin Plating (standard), Nickel and Gold Plating option available upon request TPC Series Low ESR TACmicrochipTM LOW ESR RANGE (Letter Denotes Case Size) (ESR in m) Capacitance Cap. (F) Code 0.33 334 0.47 474 0.68 684 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 2.0V 3.0V 4.0V Voltage Rating DC (VR ) at 85C 6.3V 10V 16V 20V 25V R(3000) L(5000) L(5000) L(4000) R(1800) R(1500) R(1800) R(1500) R(1800) R(1500) L(4000),R(1800) R(1500) R(1800) RATINGS & PART NUMBER REFERENCE AVX Part No. EIA TPCR336*003# TPCR476*003# TPCR226*004# TPCR336*004# TPCL106M006# TPCR156*006# TPCR226*006# TPCL335*010# TPCL475M010# TPCL106M010# TPCR106*010# TPCR156*010# TPCR106*016# TPCR105*025# 0805 0805 0805 0805 0603 0805 0805 0603 0603 0603 0805 0805 0805 0805 Rated DCL Case Capacitance Voltage (A) Size (F) (V) Max. R R R R L R R L L L R R R R 33 47 22 33 10 15 22 3.3 4.7 10 10 15 10 1.0 3.0 3.0 4.0 4.0 6.3 6.3 6.3 10.0 10.0 10.0 10.0 10.0 16.0 25.0 DF ESR 100kHz Ripple Current Ratings (A) % Max. (m) 25C 85C 125C Max. @100kHz 1.0 1.5 0.9 1.3 0.6 0.9 1.4 0.5 0.5 1.0 1.0 1.5 1.6 0.5 10 10 8 10 10 8 10 8 10 20 8 10 10 8 1800 1500 1800 1500 4000 1800 1500 5000 5000 4000 1800 1500 1800 3000 0.158 0.173 0.158 0.173 0.079 0.158 0.173 0.071 0.071 0.079 0.158 0.173 0.158 0.122 0.142 0.156 0.142 0.156 0.071 0.142 0.156 0.064 0.064 0.071 0.142 0.156 0.142 0.110 0.063 0.069 0.063 0.069 0.032 0.063 0.069 0.028 0.028 0.032 0.063 0.069 0.063 0.049 100kHz Ripple Voltage Ratings (V) 25C 85C 125C 0.285 0.260 0.285 0.260 0.316 0.285 0.260 0.354 0.354 0.316 0.285 0.260 0.285 0.367 0.256 0.234 0.256 0.234 0.285 0.256 0.234 0.318 0.318 0.285 0.256 0.234 0.256 0.331 0.114 0.104 0.114 0.104 0.126 0.114 0.104 0.141 0.141 0.126 0.114 0.104 0.114 0.147 All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. * Insert K for 10% and M for 20% Capacitance Tolerance NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. The EIA & CECC standards for Low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. 37