Features
+17.5 dBm Output Power
Low Current: 70 mA, Typ.
800-2700 MHz Operation
Single +3V to +6V Supply
Input and Output Matched to 50 , DC Blocked
Low-Cost SOIC-8 Plastic Package
Applications
Power Amplifier Drivers
Diode-Ring Mixer Buffers
PCS Medium Power Amplifiers
Medium Power WLANs
Base Station Receivers
800-2700 MHz
Broadband Driver Amplifier
Page 1 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
CMM2306-AJ
December 2007 - Rev 29-Dec-07
The Mimix CMM2306-AJ is a premium performance, pin-
for-pin compatible second source for the TriQuint®9132
and the Mini-Circuits®VNA. Providing higher gain and lower
noise figure than either of the existing standard amplifiers at
25% less drain current, the CMM2306-AJ is an excellent choice
for power sensitive applications, while delivering more design
margin than either of the existing alternatives. This device
will drop into existing sockets and offers the same single sup-
ply, broadband, 50 matched and DC blocked input and out-
put features and performance, that the industry has come to
expect, with much higher efficiency and lower current.
Packaged in a low-cost surface mount SOIC-8 package, the
CMM2306-AJ offers superior performance to existing
alternatives at a competitive price.
Vd1
GND 2
RF IN 3
GND 4
8 GND
7 GND
6 RF OUT
5 GND
Functional Block Diagram
Description
Recommended Operating Conditions stinUpyTretemaraPstinUpyTretemaraP
Drain Voltage (+Vd ) 3.0 to 6.0 Volts Operating Temperature (PC Board) -40 to +70 °C
Electrical Characteristics
The following specifications are guaranteed at room temperature with drain voltage (+Vd ) = 5.0 V ±5% at 2.5 GHz.
stinUxaMpyTniMnoitidnoCretemaraP
Frequency Range 800 2700 MHz
Small Signal Gain 18.5 20 dB
Bd5.3 erugiF esioN
mBd715.51 @ 1 dB Compression tuptuO rewoP
Output 3rd Order Intercept 27 dBm
Input Return Loss 8 dB
Output Return Loss 10 dB
DC Supply Current 70 80 mA
Supply Voltage 35 6V
TriQuint and Mini-Circuits are trademarks of their respective corporations.
Drain Voltage (+Vd)
Drain Current (Id)
RF Input Power
Power Dissipation
Thermal Resistance
Storage Temperature
Operating Temperature
Channel Temperature
Soldering Temperature
+7 V
150 mA
15 dBm
1.0 W
55 ºC/W
-65 ºC to +150 ºC
-40 ºC to +80 ºC
175 ºC
260 ºC for 5 Sec
Absolute Maximum Ratings
800-2700 MHz
Broadband Driver Amplifier
Page 2 of 5
Pin # Name Description
1+V
dDrain voltage. Connect to positive supply.
2 GND Ground.
3 RF IN RF input (Internally DC blocked).
4 GND Ground.
5 GND Ground.
6 RF OUT RF output (Internally DC blocked).
7 GND Ground.
8 GND Ground.
Vd1
GND 2
RF IN 3
GND 4
8 GND
7 GND
6 RF OUT
5 GND
Connection Diagram and Pin Description
1
2
3
4
8
7
6
5
+5V
RF IN
0.01µF
RF OUT
Test Circuit Diagram
Typical Performance
The following typical performance parameters were tested in
the test circuit shown at room temperature and with a drain
voltage (+Vd) = 5 V, unless otherwise specified.
Frequency (MHz)
Gain vs Frequency vs Vd
Gain (dB)
10
14
18
22
26
30
500 1000 1500 2000 2500 3000
3V
4V
5V
6V
Frequency (MHz)
Gain vs Frequency vs Temperature @ 5V
Gain (dB)
17
20
23
26
29
32
-20°C
0°C
+25°C
+70°C
800 900 1500 1800 2000 25002400
Frequency (MHz)
Power Output (P-1) vs Frequency vs Temperature @ 5V
Power Output (P-1) (dBm)
16
17
18
19
20
21
-20°C
0°C
+25°C
+70°C
800 900 1500 1800 2000 25002400
Frequency (MHz)
Power Output (P-1) vs Frequency vs Vd @ 25 °C
Power Output (P-1) (dBm)
9
12
15
18
21
24
800 900 1500 1800 2000 25002400
3V
5V
6V
Supply Voltage (Vd)
Gain vs Vd vs Temperature@ 1.8 GHz
Gain (dB)
20
22
24
26
28
30
345
6
-20°C
0°C
+25°C
+70°C
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
CMM2306-AJ
December 2007 - Rev 29-Dec-07
800-2700 MHz
Broadband Driver Amplifier
Page 3 of 5
Typical Performance
Frequency (MHz)
Noise Figure vs Frequency vs Vd @ 25 °C
Noise Figure (dB)
2.25
2.50
2.75
3.00
3.25
3.50
800 900 1500 1800 2000 25002400
3V
5V
6V
Frequency (MHz)
Noise Figure vs Frequency vs Temperature @ 5V
Noise Figure (dB)
2.25
2.50
2.75
3.00
3.25
3.50
800 900 1500 1800 2000 25002400
-20°C
+25°C
+70°C
Frequency (MHz)
OIP3 vs Frequency vs Temperature @ 5V
OIP3
15
18
21
24
27
30
800 900 1500 1800 2000 25002400
-20°C
0°C
+25°C
+70°C
Frequency (MHz)
OIP3 vs Frequency vs V d @ 25 °C
OIP3
15
18
21
24
27
30
800 900 1500 1800 2000 25002400
3V
5V
6V
Frequency (MHz)
S22 vs Frequency vs Vd
Output RL (S 22)
-20
-16
-12
-8
-4
0
500 1000 1500 2000 2500 3000
3V
4V
5V
6V
Frequency (MHz)
S11 vs Frequency vs Vd
Input RL (S11)
-20
-16
-12
-8
-4
0
500 1000 1500 2000 2500 3000
3V
4V
5V
6V
Power In (dBm)
Power In vs Power Out & Efficiency
Vd = 4.8 V & Frequency = 1.88 GHz
Power Out (dBm)
0
5
10
15
20
25
-20 -14 -8 -2 4
0
6
12
18
24
30
Efficiency (%)
Efficiency
Power Out
Frequency (MHz)
S12 vs Frequency vs Vd
Reverse Gain (S 22)
-65
-55
-45
-35
-25
-15
500 1000 1500 2000 2500 3000
3V
4V
5V
6V
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
CMM2306-AJ
December 2007 - Rev 29-Dec-07
800-2700 MHz
Broadband Driver Amplifier
Page 4 of 5
Physical Dimensions
Test Configuration and Evaluation
Mimix tests the CMM2306-AJ on an FR4 PC test
board. FR4 was chosen for its low loss characteristics at fre-
quencies up to 2.5 GHz. Plated through hole connections
from the top of the board to the backside ground plane mini-
mizes inductance in the ground connections. These through
hole connections are as close as possible to each ground pin.
For evaluation purposes Mimix offers a prototype
evaluation board (PB-CMM2306-AJ) for the CMM2306-AJ.
Please call the factory or a local representative for more
information.
Handling Precaution
Microwave devices are sensitive to electrostatic dis-
charge. Proper precautions should be taken to avoid ESD
damage.
Adjacent Channel Power
/4 DQPSK Modulation, Vd= 4.8 V
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
CMM2306-AJ
December 2007 - Rev 29-Dec-07
800-2700 MHz
Broadband Driver Amplifier
Page 5 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
CMM2306-AJ
Ordering Information
The CMM2306-AJ is available in a surface mount SOIC-8 plastic package.
Part Number for Ordering Package
CMM2306-AJ-0G00 Matte Tin finished RoHS compliant SOIC-8 package in bulk quantity
CMM2306-AJ-0G0T Matte Tin finished RoHS compliant SOIC-8 package in tape and reel
PB-CMM2306-AJ-0000 Evaluation Board
Handling and Assembly Information
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
December 2007 - Rev 29-Dec-07
