bsg9093x DALLAS SEMICONDUCTOR Touch Memory Mount DS9093x Products FEATURES Keyring mount version: DS9093F snap-in fob for use with flanged MicroCan (F3/F5 package) * Two permanent mount versions: D9093S allows a Touch Memory to be easily and permanently attached to an object using screws or rivets (F5 package) DS9093P has a locating pin and a single mount- ing hole for permanent attachment (F5 package) * Prepunched hole mount: DS9093RA lock ring firmly fastens F5 package DS9093RB flange enlargement provides addi- tional flange surface area if needed _ SECTION B-8 SECTION A-A All dimensions are in millimeters. THROUGH-MOUNT FOR CONTAINERS DS9093P/S 5.3 B 3.0 MINIMUM REQUIRED | CLEARANCE TOUCH DEVICE ft 44 xo 5.0 oa a 5.2 DIA. NOTE: PIN IS REPLACED 35.0 SECTION A-A WITHA THAU HOLE ON DS9093S 30.9 4+ 204 SECTION B-B c} 051794 1/2 130 Copyright 1993 Dallas Semiconductor Corporation Printed in U.S.A.DS9093x DESCRIPTION The DS9093 Touch Memory Mount Products offer the user low-cost fixtures that hold a Touch Memory for thumbpad applications or permanent attachment to an object. The DS9093F plastic snap~in fob offers the simplest way to mount a Touch Memory for applications that require only momentary contact. The fob can be attached to a keyring for carrying. Do not apply solvents or adhesives to this fob. This might affect the mechani- cal strength and reliability. The DS9093S and DS9093P allows the user to perma- nently attach a Touch Memary to an object with one or two screws, rivets, etc. The plastic plate is designed with an inset that accommodates the flange of the F5 pack- age and allows for flush mounting. A protective wall is provided along the sides of the plate to reduce incidental damage to the Touch Memory. The DS9093RA Lock Ring is a stainless steel fastener which provides an inexpensive method for firmly attach- ing a Touch Memory to any item with a pre-punched hole. The Touch Memory is inserted through the hole and is restrained by the flange on the Touch Memory. The DS9093RA Lock Ring is crimped onto the portion of the Touch Memory which protrudes through the hole. The optional DS9093RB Flange Enlargement is a thin stainless steel washer that provides additional surface area to improve retention of the Touch Memory in mate- rials that are very thin or flexible. The DS9093RB is formed with a slight dome to improve the gripping force exerted onto the pre-punched material. The domed side of the washer should face the flange of the Touch Memory, the flat side should face the material. DS9083RA 19.05 mm 16.23 mm 0.30 mm |- DS9093RB 19.05 mm 16.51 mm osm fe OSs093RB FLANGE ENLARGEMENT (OPTIONAL) TOUCH . MEMORY DSg093RA LOCK RING FLANGE OF TOUCH MEMORY 131 051794 2/2