Industrial Power Supplies TSL SERIES 30-480 Watts CE Marked - LVD & EMC * Din Rail Mounting * Power Factor Corrected Versions * Adjustable Outputs * Low Noise * High Efficiency * Parallelable Units Specification (All specifications are typical at nominal input voltage; full load and 25 C unless stated otherwise) Input Voltage * Input Frequency * 93-264 V AC - TSL30 & TSL60 93-132 V AC/187-264 auto-ranging TSL120, TSL240 & TSL480 47-63 Hz Inrush Current * See Table Input Current * See Table Hold Up Time * Minimum 15 ms at 115 V AC, minimum 25 ms at 230 V AC Output Voltage * See Table Output Adjustment * 12 V models: 12-14 V DC, 24 V models: 24-28 V DC & 48 V models: 48-52 V DC Line Regulation * 0.2% Load Regulation * 0.3% for load variation 10-90% Ripple & Noise * <50 mV pk-pk 20 MHz bandwidth Overload Protection * 110% Overvoltage Protection * 140% of V out typically Efficiency * 85% minimum Operating Temperature * -25 C to 70 C, derating above 50 C at 2%/C Storage Temperature * -25 C to 85 C Relative Humidity * 95% Isolation * 3000 V AC - input to output, 1 minute 2000 V AC - input to case, 1 minute 500 V AC - output to case, 1 minute EMI/RFI * EN55011, EN55022, FCC class B Safety Approvals * EN60950, IEC950, cUL/UL 1950, UL508 Immunity * EN61000-4-4 2 kV MTBF * 200,000 hours Switching Frequency * 80 kHz typical TSL120, TSL240 & TSL480 (P version) with PFC-EN61000-3-2 Tel: +44 (0)118 984 5515 UK Tel: +49 (0)700 9977 1000 D Output Voltage & Current Ratings Output Power Max. 30 W 60 W 120 W 480 W Output Current Max. 2.50 A 1.25 A 5.00 A 2.50 A 5.00 A 5.00 A 2.50 A 2.50 A 10.00 A 10.00 A 5.00 A 5.00 A 20.00 A 20.00 A 10.00 A 10.00 A Input Current @ Full Load 115 V AC 230 V AC 0.5 A 0.30 A 0.5 A 0.30 A 1.1 A 0.65 A 1.1 A 0.65 A 1.9 A 1.20 A 1.9 A 1.20 A 1.9 A 1.20 A 1.9 A 1.20 A 3.5 A 1.70 A 3.5 A 1.70 A 3.5 A 1.70 A 3.5 A 1.70 A 7.2 A 3.50 A 7.2 A 3.50 A 7.2 A 3.50 A 7.2 A 3.50 A In-rush Current Max.(4) 115 V AC 230 V AC 17.5 A 35.0 A 17.5 A 35.0 A 24.0 A 48.0 A 24.0 A 48.0 A 24.0 A 48.0 A 24.0 A 48.0 A 24.0 A 48.0 A 24.0 A 48.0 A 35.0 A 69.0 A 35.0 A 69.0 A 35.0 A 69.0 A 35.0 A 69.0 A 33.0 A 65.0 A 33.0 A 65.0 A 33.0 A 65.0 A 33.0 A 65.0 A Model Number TSL30-112 TSL30-124 TSL60-112 TSL60-124 TSL120-124 TSL120-124P(1) TSL120-148 TSL120-148P(1) TSL240-124 TSL240-124P(1) TSL240-148 TSL240-148P(1) TSL480-124 TSL480-124P(1) TSL480-148 TSL480-148P(1) DIN-Rail Power 240 W Output Voltage Nom. 12 V DC 24 V DC 12 V DC 24 V DC 24 V DC 24 V DC 48 V DC 48 V DC 24 V DC 24 V DC 48 V DC 48 V DC 24 V DC 24 V DC 48 V DC 48 V DC NOTES: 1. Power Factor Correction (EN61000-3-2) models. 2. Output current characteristic, suitable for battery charging applications. 3. Parallel operation available for 5 units maximum, user selectable by jumper on PCB. 4. Inrush current is the peak current flowing into a power supply at the instant AC power is applied. This peak (max. 2ms) may be much higher than the steady state input current due to the charging of the input capacitors. Industrial Power Supplies 30-480 Watts TSL Series Mechanical Details TSL30 MODEL TSL60 MODEL Tel: +33 (0)820 801 401 TSL480 MODEL F www.xpplc.com TSL240 MODEL TSL120 MODEL Tel: +41 (0)56 483 34 00 CH Rev 1.0