Product Specifications CBC819-DF Material ID: CBC819-DF Crossband Coupler, Cellular/PCS CHARACTERISTICS Electrical Specifications 3rd Order IMD Test Method Two +43 dBm carriers 3rd Order IMD, typical 107 dBm dc Passthrough Band 1 | Band 2 Isolation Between Paths, minimum 50.0 dB Lightning Surge Current 15 kA Lightning Surge Current Waveform 8/20 waveform Electrical Specifications (Band 1) Insertion Loss, maximum 0.20 dB License Band Cellular Operating Frequency Band 806 - 940 MHz Output Power, maximum composite 500 W Return Loss at Frequency Band, minimum 20 dB @ 806-940 MHz Electrical Specifications (Band 2) Insertion Loss, maximum 0.20 dB License Band PCS Operating Frequency Band 1850 - 2000 MHz Output Power, maximum composite 275 W Return Loss at Frequency Band, minimum 20 dB @ 1850-2000 MHz General Specifications Application Indoor Includes Mounting hardware | Outdoor (c)2010 CommScope, Inc. All rights reserved. All trademarks identified by (R) or TM are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 1 of 2 3/31/2010 Product Specifications CBC819-DF - Material ID: CBC819-DF Mechanical Specifications Color Gray Connector Interface 716 DIN Female Connector Interface Style Long neck Ground Screw Diameter 8.00 mm Mounting Pipe Diameter 40-160 mm Mounting Pipe Hardware Band clamps Environmental Specifications Ingress Protection Test Method IEC 60529:2001, IP68 Operating Temperature 40 C to +65 C (40 F to +149 F) Relative Humidity Up to 100% Dimensions Depth 50.0 mm | 2.0 in Height 186.0 mm | 7.3 in Volume 1.7 L Width 186.0 mm | 7.3 in Weight, without mounting hardware 2.0 kg | 4.4 lb (c)2010 CommScope, Inc. All rights reserved. All trademarks identified by (R) or TM are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 2 of 2 3/31/2010